urban ambiance UQL2402 Installation guide

Brand
urban ambiance
Model
UQL2402
Type
Installation guide

Urban ambiance UQL2402 is a lighting fixture designed for indoor use, likely in residential or commercial settings. It features a sleek and modern design, and comes with all the necessary components for easy installation. The fixture requires three G9 LED bulbs, which are included in the package. It has a maximum wattage of 50W per bulb, providing ample brightness for various lighting needs. With its adjustable shades, the UQL2402 allows for customization of the light direction and intensity, making it suitable for different room settings and activities.

Urban ambiance UQL2402 is a lighting fixture designed for indoor use, likely in residential or commercial settings. It features a sleek and modern design, and comes with all the necessary components for easy installation. The fixture requires three G9 LED bulbs, which are included in the package. It has a maximum wattage of 50W per bulb, providing ample brightness for various lighting needs. With its adjustable shades, the UQL2402 allows for customization of the light direction and intensity, making it suitable for different room settings and activities.

1of2
STEP 1 -Attach Inner Backplate to
Outlet Box
A. Secure the Inner Backplate (A) to the
outlet box with outlet box screws (not
supplied). Tighten until snug.
* Pliers is required on this step.
Figure 1
Package Contents
B
A
C
Mounting Screw
x2
Inner Backplate
x1
STEP 2 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
White wire
from fixture
Black wire
from fixture
Ground wire
from fixture
White wire
from supply
Black wire from
supply (or Red)
Ground wire
from supply
Fixture
Body
x1
Outlet Box
STEP 4 Install Shade-
A. Place Shades (F) over Sockets as shown. By
using the Socket Collar Tool (G), thread
Socket Collars (E) onto sockets to secure
Shades (F). Hand tighten until snug.
Figure 4
Figure 2
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Outlet Box Screw
(not Supplied)
A
STEP 3 Install Fixture Body-
A. Place the backplate of the Fixture Body (C) onto the Inner Backplate
(A). Line up holes on the side of the backplate and the mounting
C
A
B
Figure 3
holes on the side of the Inner
Backplate (A). Secure them
together by threading
Mounting Screws (B) into the
mounting holes on the Inner
Backplate (A). Hand tighten
until snug.
F
Socket
E
G
STEP 5 Install Bulb-
A. Install the G9 bulbs as specified (not provided)
D
Note: This fixture is rated to use 50W maximum G9 Xenon
bulbs. You may use a lower wattage G9
Xenon or if you purchased the
LED model it is supplied with G9
LED bulbs.
Your fixture is now assembled
and ready to use. Enjoy!
Figure 5
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Light Source: (3) LED G9 4.5W Bulbs
Estimated Assembly Time: 20-30 minutes
Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement
parts.
FShade
x3
Socket
Collar Tool
x1
G
ESocket Collar
x3
Installation Instructions: UQL2402
www.urbanambiance.com
2of2
SKU: UQL2402
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4"
NO. QTY.
PART NUMBER REPLACEMENT PART DESCRIPTION
1
3
2
3
UQL2402SHSHADE
UQL2402LED BULB 4.5W LED G9 DIM WHITE
1
2
G N D
21”
6” 5”
6.25”
3.25”
4.25”
3”
3”
(3) 4.5W Maximum
LED G9 Bulbs
www.urbanambiance.com
  • Page 1 1
  • Page 2 2

urban ambiance UQL2402 Installation guide

Brand
urban ambiance
Model
UQL2402
Type
Installation guide

Urban ambiance UQL2402 is a lighting fixture designed for indoor use, likely in residential or commercial settings. It features a sleek and modern design, and comes with all the necessary components for easy installation. The fixture requires three G9 LED bulbs, which are included in the package. It has a maximum wattage of 50W per bulb, providing ample brightness for various lighting needs. With its adjustable shades, the UQL2402 allows for customization of the light direction and intensity, making it suitable for different room settings and activities.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents