2. Ergotron
  3. 60-591-003

Ergotron 60-591-003 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Ergotron Steel Stud mounting kit. This document provides guidance on mounting the kit to steel studs with drywall, with a maximum weight capacity of 50 lbs. I'm ready to answer your questions about the instructions or the product.
  • Can this mounting kit be used on wood studs?
    What is the maximum weight capacity of the mounting kit?
    What thickness of drywall is required?
888-60-502-M-00 rev.A • 09/07
1 of 2
USA 1-800-888-8458
Europe +31 (0)33-45 45 600
?
www.ergotron.com
Steel Stud Mounting Kit
ASSEMBLY INSTRUCTIONS
3/8"
1/4-20 x 1-1/2"
6x
6x
1
>1/2"
Drywall
Steel
Stud
WARNING: Ensure that the wall structure is
capable of supporting four times the total
weight of mounted equipment. Mounting to
wall surfaces that do not meet this criteria may
result in an unstable, unsafe condition which
could lead to personal injury and/or property
damage. Consult a construction professional if
you have any doubt about what this means in
regard to your particular application.
NOTE: Do not mount to wood
studs or walls without studs.
<50 lbs. (22.7kg)
a b
WARNING:
Center holes must go into
the steel stud.
1/2"
(13mm)
1/2"
888-60-502-M-00 rev.A • 09/07
2 of 2
3
3/8"
1/4-20 x 1-1/2"
Fasteners
supplied with
Ergotron
component
ordered
separately.
6x
a
a
c
b
b
d
2
/