Page is loading ...
Dear customer,
order ID and we’ll give you a satisfactory answer! Here’re some common solutions
during the use of turntable. Hope these will help you.
Q: What should I do if the turntable plastic cover cracked?
A: Please contat us at: codi-services@outlook to get a cover replacement.
Q: How to connect the Bluetooth function?
A: Please turn on the turntable first, and you will see the flashing blue light. Then, keep the tone
arm in the arm holder and now you can turn on your bluetooth to search the device name
"CODI"!
After paring, and you can hear a voice "Di dong" which means paring successfully!
Q: What should I do if the turntable keep wobbling?
A: There are built-in springs inside the turntable to reduce absorption in order to protect the
turntable, so it's normal for little up and down slightly.
Q: Why does the turntable skip?
A: There’re 3 reasons to cause for the skip problem.
1. The position of the stylus is not in the middle (not the parallel tone arm). If the stylus does not
play it according to the correct tracking, it will cause skipping playback. Attached pls find the
following phtos for your reference.
SOLUTION:
Please contat us at: codi-services@outlook to get a stylus correct video or a new needle.
2. The record vinyls are used for long time, and some scratches will cause skipping playback.
SOLUTION:
Please use a new vinyl to display music.
Q: What is the voltage and amperage of the power cord?
A: The voltage runs with 110-240 V, and the power cord should be 5V 1.5A.
Q: Does it come with 45rpm adaptor?
A: Yes.
/
