Nashua Tape 1210364 Operating instructions

Type
Operating instructions

This manual is also suitable for

Feb. 2009
The information presented herein was prepared at BERRY GLOBAL, INC. (25 Forge Parkway Franklin, MA 02038) by qualied technical personnel. To BERRY’s knowledge it is true and accurate. However, the informa-
tion and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that the product is suitable for the intended use, and that
such use complies with all applicable federal, state and local laws and regulations. The data are submitted only for the user’s information and consideration, and do not constitute a warranty of any kind (including but not
limited to a warranty of merchantability or of tness for a particular purpose), or a representation for which BERRY assumes any legal responsibility.
Instructions for Use
Step 1:
Peel away clear cellophane
release liner.
Step 2:
Press tape rmly on object to be wrapped, hold
in place and STRETCH as you begin to wrap
the tape once completely over itself.
Step 3:
While holding the tape in place, stretch to 2
to 3 times its length and wrap object with a
2/3 overlap. This will ensure a tight seal.
Step 4:
To complete the repair, wrap tape completely
over the previous layer and press rmly.
Dependable. Reliable. Professional.
STRETCH & SEAL
®
09-17
  • Page 1 1

Nashua Tape 1210364 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI