2. ELK OUTDOORS
  3. EO-ROCCW2-CAN

ELK OUTDOORS EO-ROCCW2-CAN, EO-ROCCW2-ABY Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the ELK OUTDOORS EO-ROCCW2-CAN Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1
For information on Care and Cleaning or to register your ELK OUTDOORS
product by highwood, please visit www.highwood-usa.com.
PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
ELK OUTDOORS
by
high
wood
Mountain Bluff Collection
Essential Rocking Chair
Assembly Guide
1) With the Back and Seat on Their
Sides, Attach One Side of the Back
to the Seat Using Two "A" Bolts.
2) Repeat on Other Side.
EO-ROC-CW2
09.05.2018
A
x 10
1/4"-20 X 1-3/4"
B
1/4"-20 X 2"
x 6
A
BACK
SEAT
For information on Care and Cleaning or to register your ELK OUTDOORS
product by highwood, please visit www.highwood-usa.com.
PAGE 2 OF 2
ELK OUTDOORS
by
high
wood
Mountain Bluff Collection
Essential Rocking Chair
Assembly Guide
EO-ROC-CW2
09.05.2018
3) Attach Front of Leg Assembly to Seat
Using Two "A" Bolts as Shown Above.
Attach Back of Leg Assembly to Seat Using
Two "B" Bolts as Shown Below.
4)Repeat on Other Side.
5) Attach Arm Assembly to Leg Using One
"B" Bolt. Attach Arm Assembly to Back
Using One "A" Bolt.
6) Repeat on Other Side.
BACK
SEAT
A
LEG ASSEMBLY
BACK
B
LEG ASSEMBLY
SEAT
LEG ASSEMBLY
ARM ASSEMBLY
B
A
BACK
INSERTS FACING TOWARD
SEAT AS SHOWN
/