2. SNOWBEAR
  3. 324-204

SNOWBEAR 324-204 User manual

  • Hello! I am an AI chatbot trained to assist you with the SNOWBEAR 324-204 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Owner’s Manual &
Assembly Guide
38 | P a g e SnowBear
®
Hydraulic Plow System
Control Valve Adjustment
THE UP/DOWN MOVEMENT OF THE SNOW PLOW CYLINDER IS CONTROLLED BY A FLOW
CONTROL VALVE. THIS VALVE IS LOCATED ON THE FRONT OF THE PUMP.
1. Loosen the nut on the flow control valve using a 11/16" socket, extension and ratcheting wrench.
2. Using the 5/32" Allen key, tighten the valve stud in all the way, then back it off (loosen) 1/4 of a turn.
3. Using an 11/16" open ended wrench, and a 5/32" Allen key to maintain the valve stud position,
tighten the flow control valve nut. If cylinder does not lower, repeat steps 1-3, but back off stud by
1/8 turn increments.
/