2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. Toro
  7. Mulching Kit, 30in TurfMaster Walk-Behind Lawn Mower

Toro Mulching Kit, 30in TurfMaster Walk-Behind Lawn Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Mulching Kit, 30in TurfMaster Walk-Behind Lawn Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3376-352RevA
MulchingKit
30inTurfMasterWalk-BehindLawnMower
ModelNo.125-5064
InstallationInstructions
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Mulchbafeassembly
1
Carriagebolt(5/16x3/4inch)
3
Flangelocknut(5/16inch)
4
Flange-headbolt(1/4x1/2)
1
Installthemulchingkit.
Nopartsrequired
–
Converttoside-dischargeoperation(asneeded).
InstallingtheMulchingKit
WARNING
Ifyouleavethewireonthesparkplug,someone
couldaccidentallystarttheengine.Accidental
startingoftheenginecouldseriouslyinjureyouor
otherbystanders.
Disconnectthewirefromthesparkplugbeforeyou
doanymaintenance.Setthewireasidesothatit
doesnotaccidentallycontactthesparkplug.
Note:Determinetheleftandrightsidesofthemachine
fromthenormaloperatingposition.
1.Parkthemachineonalevelsurface.
2.Makesurethatallmovingpartshavestoppedandthe
machinehascooled.
3.Removethespark-plugwirebeforestartingthese
instructions.
4.Removethegrassbagorsidedischargechutefromthe
machine,whicheveryourmachineiscurrentlyequipped
with,alongwithitshardware.
5.Tiptheunitontoitsrightside.
6.Cleanoutanygrassbuildupfromundersideofdeck.
7.Removeandretaintheowcontrolbafefromthe
frontofthedeck(Figure1)andhardware.
g021232
2
3
3
1
1
Figure1
Removingoriginalhardware
1.Nut
3.Carriagebolt
2.Flowcontrolbafe
8.InstallthemulchbafeassemblyasshowninFigure2.
©2013—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3376-352*A
g021 184
1
2
2
3
1
4
Figure2
Installingnewhardware
1.Flangelocknut(5/16inch)
3.Rear-dischargeplug
2.CarriageBolt(5/16x3/4
inch)
4.Flange-headbolt(1/4x
1/2inch)
9.Installthedischargecoverontothemachine.
Note:Youwillhaveanextrabolt,astheange-head
boltthatcomeswiththiskitwillreplaceoneofthe
boltsthatmountthedischargecovertothemachine.
10.Installtherear-dischargeplugbygripingthehandle,
raisingthereardeector,andinsertingitintothe
rear-dischargechuteuntilthelatchlocksintoplace
(Figure3).
G019812
Figure3
1.Rear-dischargeplug
2.Reardeector
11.Tightenallthefasteners.
12.Carefullyplacetheunitinthenormaloperating
position.
13.Connectthespark-plugwire.
Note:Anoptionallowliftblade(P/N120-9500)maywork
betterincertainmulchingconditions.Refertothemower
operator’smanualforblademaintenance.
ConvertingtoSide-Discharge
Operation
Toconvertthemowerbacktoside-dischargeoperation,
completethefollowingprocedure:
1.Parkthemachineonalevelsurface.
2.Makesurethatallmovingpartshavestoppedandthe
sparkplugwirehasbeendisconnected.
Note:Allowtheunittocoolbeforestartingthese
instructions.
3.Removethebaggerfromtheunitifequipped.
4.Tiptheunitrearwardontoitshandle.
5.Cleanoutanygrassbuildupfromundersideofdeck.
6.Removethesidedischargecover.
7.Removethemulchbafeassemblyanditshardware.
8.Installstandardbladesiflow-liftbladeswereused.
9.Installtheowcontrolbafeanditshardware.
10.Installthesidedischargechuteanditshardware.
DANGER
Anuncovereddischargeopeningwillallow
objectstobethrowninthedirectionofthe
operatororbystanders.Also,contactwiththe
bladescouldoccur.Thrownobjectsorblade
contactcancauseseriousinjuryordeath.
Neveroperatethemachinewithoutthe
side-dischargedeectororside-discharge
chuteinplaceandworkingproperly.
11.Installthebaggerorrear-dischargeplugfromthe
machine.
WARNING
Ensurethateithertherear-dischargeplugor
thegrassbaghasbeeninstalledbeforeyou
turnonthemachine.Neverengagetheblades
withouteithertherear-dischargeplugorthe
grassbaginstalled.
2
/