Aleratec 240143 User guide

Category
Paper shredders
Type
User guide

Aleratec 240143 is perfect for shredding your old CDs and DVDs. It has an innovative Auto Start/Stop smart sensor that automatically starts when a disc is placed into the feed opening and stops as soon as the item travels completely through the feed opening. This user-friendly feature allows for easy and efficient shredding without having to manually operate the shredder. With its compact size (7.5 in. x 5.0 in. x 5.0 in.) and lightweight design (3.6 lbs), the Aleratec 240143 is easy to store and transport, making it a great choice for both home and office use.

Aleratec 240143 is perfect for shredding your old CDs and DVDs. It has an innovative Auto Start/Stop smart sensor that automatically starts when a disc is placed into the feed opening and stops as soon as the item travels completely through the feed opening. This user-friendly feature allows for easy and efficient shredding without having to manually operate the shredder. With its compact size (7.5 in. x 5.0 in. x 5.0 in.) and lightweight design (3.6 lbs), the Aleratec 240143 is easy to store and transport, making it a great choice for both home and office use.

USER GUIDE
Aleratec
DVD/CD Shredder™
Part No. 240143
www.aleratec.com
Copyright/Model Identification
The content of this manual is for informational purposes only and is subject to change
without notice.
This manual is copyright with all rights reserved. Under copyright laws, this manual
and the software described within may not be copied, except in the normal use of the
product(s) described within or to make a backup copy.
Copyright© 2008
Aleratec, Inc.
9851 Owensmouth Avenue
Chatsworth, CA 91311 U.S.A.
www.aleratec.com
Aleratec™ and DVD/CD Shredder™ are trademarks of Aleratec, Inc.
Please record the following information to help expedite any warranty claim:
Model No. ___________________________________
Date Purchased ________________________________
Place of Purchase ______________________________
www.aleratec.com
1
Introduction
Thank you for purchasing the Aleratec DVD/CD Shredder. Please read this User
Guide thoroughly before using this product.
Precautions
Before operating your DVD/CD Shredder, please read the following.
Warning:
When shredding DVDs or CDs, keep eyes and ngers away from the
feed opening to avoid possible injury.
Always unplug the shredder prior to moving, cleaning, or emptying the
wastebasket.
Continuous shredding of form fed computer paper should not exceed two
minutes.
Do not attempt to repair the shredder yourself.
Keep the shredder in the OFF position when it is not in use for an
extended period of time.
Product is not intended for use by children (product is not a toy). Keep
shredder out of the reach of children.
Avoid touching the document feed opening with hands. Do not place
hands or ngers into shredder opening to avoid serious injury.
Avoid clothing touching the document feed opening. Keep all loose
articles of jewelry, and other small items away from the feed opening to
prevent injury.
Avoid hair touching the document feed opening. Keep all loose articles
of jewelry, and other small items away from the feed opening to prevent
injury.
Keep aerosol products away.
www.aleratec.com
2
Introduction
Key Items
Note: Choose a Good Location
Allow adequate clearance for moving parts.1.
Do not place near heat sources such as radiators or air ducts, or in a 2.
place subject to direct sunlight, excessive dust, mechanical vibration or
shock.
Good care will help assure maximum product life. Improper operating 3.
environment and misuse may void the warranty.
On/Off
Button
DVD/CD Entrance
DVD/CD Exit
www.aleratec.com
3
Introduction
Unpacking your Shredder
Place the shredder on a at level surface.1.
Remove all packing materials from the shredder.2.
Powering Up your Shredder
Plug the shredder into a 120V electrical outlet.1.
Place the slide switch in the I position.2.
The shredder is now ready for operation.3.
www.aleratec.com
4
Shredder Operation
This shredder is equipped with an Auto Start/Stop smart sensor, which allows the
unit to automatically start when a DVD or CD is placed into the feed opening and
stop as soon as the item travels completely through the feed opening.
Troubleshooting
Index Abnormalities Causes Countermeasures
1 The machine doesn’t
work when a CD is
pushed into the entrance.
The CD is not of the 1.
common size.
The “I” side of the 2.
switch is not pushed
down.
Must put right sized 1.
CD in the machine
Push down the “I” 2.
side of the switch.
2 After working for some
time, the machine can
not operate normally.
Locked rotor makes
the motor overheated
and then temperature
protection set takes
action.
Unplug the shredder
from the outlet, and let
the machine rest for 15
minutes.
3 The machine does not
nish operating when
the CD is completely
out of the exit.
After the operation the
CD gets deformed.
Remove the CD from
the exit. (The machine
will stop then.)
4 The CD is jammed in
the machine and the
machine stops operating.
For some reason, the CD
gets deformed during
the operation.
Just put another CD
into the entrance. (The
machine will restart
its operation and the
jammed one will get
out.)
Specifications
Shredding Capacity 1 DVD or 1 CD
Shred Type Strip Cut
Shred Size 34mm
Feed Opening 126mm
Weight 3.6 lb (1.6 kg)
Dimensions
(W x D x H)
191 mm x 127 mm x 127 mm
(7.5 in. x 5.0 in. x 5.0 in.)
Power Requirements 120 Volt AC, 60Hz, 1.4 Amps
Duty Cycle 300 discs on, 15 minutes off
www.aleratec.com
5
Technical Support FAX Back Form
Aleratec, Inc.
Technical Support Fax Back Form
Please record the following information to help expedite any warranty claim:
Model No.: ___________________________
Date Purchased ________________________
Place of Purchase: ______________________
To: Technical Support Group FAX: 1-818-678-0483
FROM: __________________________ FAX: ________________________________
E-MAIL _____________________________
RE: _____________________________ TEL: ________________________________
DATE: ____________________ # OF PAGES: _______
I am experiencing the following problems with my DVD/CD Shredder:
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
By answering these questions, your problem will be solved more rapidly. Make copies as
necessary. You can reach us electronically at: www.aleratec.com on the internet.
www.aleratec.com
Notes:
GUIDE DE L’UTILISATEURE
Aleratec
DVD/CD Shredder™
Part No. 240143
www.aleratec.com
Notes:
GUÍA DEL USUARIO
Aleratec
DVD/CD Shredder™
Part No. 240143
Document Number: 9399053_ENG_FR_ES_Rev. B Copyright © 2008
Specifications subject to change without notice.
Les spécifications peuvent être modifiées sans préavis.
Las especificaciones se pueden modificar sin previo aviso.
Aleratec, Inc.
9851 Owensmouth Avenue
Chatsworth, CA 91311 U.S.A.
www.aleratec.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Aleratec 240143 User guide

Category
Paper shredders
Type
User guide

Aleratec 240143 is perfect for shredding your old CDs and DVDs. It has an innovative Auto Start/Stop smart sensor that automatically starts when a disc is placed into the feed opening and stops as soon as the item travels completely through the feed opening. This user-friendly feature allows for easy and efficient shredding without having to manually operate the shredder. With its compact size (7.5 in. x 5.0 in. x 5.0 in.) and lightweight design (3.6 lbs), the Aleratec 240143 is easy to store and transport, making it a great choice for both home and office use.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages