Vita Savannah Trellis Operating instructions

Vita
Brand
Vita
Model
Savannah Trellis
Type
Operating instructions

Vita Savannah Trellis is a stylish and sturdy trellis that will add a touch of elegance to your garden. Perfect for growing climbing plants, the trellis is made from durable materials and is easy to assemble.

The trellis is 77.2 in (196 cm) high and 47.7 in (121 cm) wide, making it the perfect size for most gardens. It is made from 1.5" (4 cm) square steel tubing, which is powder-coated for durability. The trellis is also weather-resistant, so you can be sure that it will last for years to come.

The Vita Savannah Trellis is easy to assemble. It comes with all the necessary hardware, and you can assemble it in just a few minutes. The trellis can be installed in the ground or on a concrete footing.

Vita Savannah Trellis is a stylish and sturdy trellis that will add a touch of elegance to your garden. Perfect for growing climbing plants, the trellis is made from durable materials and is easy to assemble.

The trellis is 77.2 in (196 cm) high and 47.7 in (121 cm) wide, making it the perfect size for most gardens. It is made from 1.5" (4 cm) square steel tubing, which is powder-coated for durability. The trellis is also weather-resistant, so you can be sure that it will last for years to come.

The Vita Savannah Trellis is easy to assemble. It comes with all the necessary hardware, and you can assemble it in just a few minutes. The trellis can be installed in the ground or on a concrete footing.

Check Box for These Contents
In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
(UK Tel: (44) 2038 687160 (Mon. to Fri. 1:00 PM to 10:00 PM GMT).
1.
Post Caps
(3) 1.5” (4 cm) Square - 10600 White / 14066 Composite
2.
Arches
(2) 1.5“ (4 cm) Square - 10847 White / 14074 Composite
3.
Top Long Spindles
(2) Length 21.89” (55.6 cm) - 10848 White / 14075 Composite
4.
Top Short Spindles
(2) Length 19.1“ (48.5 cm) - 10849 White / 14076 Composite
5.
Top Rail (1)
Length - 38.73” (98 cm)- 10850 White / 14077 Composite
6. Left
Post
(1) Length 57“ (145 cm) - 10851 White / 14078 Composite
7. Right
Post
(1) Length 57“ (145 cm) - 10852 White / 14091 Composite
8.
Vertical Spindles
(5) Length 47.36” (120 cm) - 10853 White / 14079 Composite
9.
Horizontal Spindles
(5) Length 38.73“ (98 cm) - 10854 White / 14080 Composite
10.
Bottom Rail
(1) Length 38.73” (98 cm) - 10855 White / 14087 Composite
11.
Ground Mounting Extensions
(2) Length 18“ (45.7 cm) - 10856 White / 14073 Composite
12.
5/8” (16 mm) Self-Auguring Stainless Steel Screw
(24) - 20016 White / 20030 Composite
Tools You Will Need
• Cordless Drill
• Hammer
• Tape Measure
• Level
• Shovel
General Information
• Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 5’x 8’ (1.5 m x
2.4 m) for unobstructed assembling.
• You should not need to use excessive force when assembling component.
The Athens / Savannah Trellis
Please read through before starting assembly.
ASSEMBLY INSTRUCTIONS
1
1
2
12
Not to Scale
6
4
3
5
IMPORTANT: CHECK THE INSIDE OF YOUR POSTS FOR ALL MATERIALS.
V3.4/090820
11
36 in
(91 cm)
39 in
(99 cm)
54.7 in (139 cm)
22.5 in (57 cm)
7 in (18 cm)
47.7 in (121 cm)
77.2 in (196 cm)
8
9
10
www.newenglandarbors.com
www.newenglandarbors.co.uk
7
2
1
Lay one of the posts on the ground and insert the bottom
rail and the five horizontal spindles as shown aside.
Note that the bottom and top rails are different - the bottom
rail only has one side with routed holes.
Insert the five vertical spindles as shown aside. Make sure
to weave the spindles as they are being inserted.
Please note that there is one spindle with a ‘spear head’
and should be placed in the middle.
Continue assembly by inserting the top rail end into the
post and progressively into each of the vertical spindles.
proceed to attach the second post to the trellis assembly
as shown below. Ensure tabs are inserted all the way into
the post.
Insert the top arches into the post caps as shown.
Note that there is a sticker on each of the arches indicating
the top of the arch.
Fasten the post caps to the arches using the eight screws
provided.
1
2
3
4
STEP ONE
2
3
NOTE: There are locking tabs located at the ends of the
horizontal rails. Once inserted and pushed into the routed
holes, they will lock into place.
4
5
5
Bottom rail
(only routed
on one side)
Spear Head
Insert 1st
Sticker
The Athens / Savannah Trellis
Note: Length to
bottom is longer
than top.
7 in
(
18 cm)
2
.25 in
(6 cm)
3
STEP T WO
Install the Top Arch
Insert the arch spindles to the openings on the top rail.
Note that there are two different sizes of spindles and should
be inserted as shown aside.
Align the four spindles into the bottom of the arch while
simultaneously inserting the arch assembly to the posts.
Excessive force should not be neccesary.
Fasten the arch assembly to the posts using the screws
provided in the hardware kit.
Finish the trellis assembly by fastening the posts to the
top and bottom rails as shown.
1
2
3
4
1
2
3
Short Spindle
Short Spindle
Long Spindle
Long Spindle
4
The Athens / Savannah Trellis
4
3
Move the trellis to
its final location. When you are satisfied with
the location, mark the positions of the posts, then move the trellis
aside and lay it carefully on it’s side. Excavate the 2 post holes
approximately 12" (30 cm) deep x 6" (15 cm) diameter. Carefully
move the trellis
back into position.
Level it both vertically and horizontally into the excavated holes.
Backfill the holes with the excavated soil.
A
B
C
Mounting Into the Ground
Trellises must be well secured in the event of high winds, etc. We
have provided two ground mounting extensions for securing the
trellis
either into the ground or into a concrete footing. If
you are
installing your trellis directly to the wall of your home, or on a
wood deck
or concrete surface, please see your hardware store for the
appropriate galvanized bracket hardware.
STEP THREE
I
nstall the Ground Mounting Extensions
Insert the ground mounting extensions into the bottom of the
trellis
posts. Secure with screws as shown aside.
STEP FOUR
Install Trellis into Ground
C
A
4
12” (30 cm)
Level
6“
(15 cm)
B
www.newenglandarbors.com
www.newenglandarbors.co.uk
North America Toll Free Phone: 1 800 282 9346
United Kingdom Tel: (44) 2038 687160
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Vita Savannah Trellis Operating instructions

Vita
Brand
Vita
Model
Savannah Trellis
Type
Operating instructions

Vita Savannah Trellis is a stylish and sturdy trellis that will add a touch of elegance to your garden. Perfect for growing climbing plants, the trellis is made from durable materials and is easy to assemble.

The trellis is 77.2 in (196 cm) high and 47.7 in (121 cm) wide, making it the perfect size for most gardens. It is made from 1.5" (4 cm) square steel tubing, which is powder-coated for durability. The trellis is also weather-resistant, so you can be sure that it will last for years to come.

The Vita Savannah Trellis is easy to assemble. It comes with all the necessary hardware, and you can assemble it in just a few minutes. The trellis can be installed in the ground or on a concrete footing.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents