Vita Luxembourg Privacy Screen Operating instructions

Type
Operating instructions
Check Box for These Contents
In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
(UK Tel: (44) 2038 687160 (Mon. to Fri. 1:00 PM to 10:00 PM GMT).
1.
Pre-Assembled Luxembourg Privacy Screen
(1)
2.
P
ost Caps (2) - 10611
3. Ground Mounting Extensions (2) - 10636-1
4. 5/8” Self-Auguring Stainless Steel Screws (8) - 20016
Tools You Will Need
Cordless Drill
Hammer
Tape Measure
Level
Shovel
General Information
Read Instructions through carefully before beginning assembly.
When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
We recommend an area approx 10’x 8’ (3 m x 2.4 m) for unobstructed assembling.
You should not need to use excessive force when assembling components.
The Luxembourg Privacy Screen
Please read through before starting assembly.
ASSEMBLY INSTRUCTIONS
1
1
2
(Pre-Assembled)
3.95 in
(10 cm)
2 in
(5 cm)
56.26 in (143 cm)
27 in
(69 cm)
20 in
(51 cm)
4
Not to Scale
3
V1.2/072517
www.newenglandarbors.com
www.newenglandarbors.co.uk
2
www.newenglandarbors.com
www.newenglandarbors.co.uk
North America Toll Free Phone: 1 800 282 9346
United Kingdom Tel: (44) 2038 687160
1
B
Move the screen to its final location. When you are satisfied with
the location, mark the positions of the posts, then move the screen
as
ide and lay it carefully on its side. Excavate the 2 post holes
approximately 18" (46 cm) deep x 6" (15 cm) diameter.
Carefully move the
screen back into position.
Level it both vertically and horizontally into the excavated holes.
Backfill the holes with the excavated soil.
A
B
C
Mounting Into the Ground
Privacy screens must be well secured in the event of high winds, etc.
We have provided two ground mounting extensions for securing the
privacy
screen either into the ground or into a concrete footing. If
you are
installing your trellis on concrete or a deck, see your
hardware store for
the appropriate galvanized bracket hardware.
STEP O
NE
Install the Ground Anchor Stakes
Insert the ground mounting extensions into the bottom of the
privacy
screen posts. Secure with screws into the four pre-
drilled holes.
STEP TWO
Install Trellis into Ground
STEP THREE
Install the Post Caps
(Purchase Separately)
Please see instructions illustrated with the planter box.
OPTIONAL
Mounting to Barcelona Planter Box
2
3
A
2
18
(46 cm)
Level
6“
(15 cm)
  • Page 1 1
  • Page 2 2

Vita Luxembourg Privacy Screen Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI