Copernicus King Royal RC146 Assembly Manual

Brand: Copernicus

Model: King Royal RC146

Type: Assembly Manual

Copernicus King Royal RC146 is a versatile and durable storage and display unit designed for educational environments. With its sturdy construction and multiple configuration options, the RC146 can be customized to meet the specific needs of your classroom or learning space.

The RC146 features a spacious whiteboard surface for writing notes, brainstorming ideas, or displaying charts and graphs. The whiteboard is magnetic, so you can easily attach magnets to hold papers or other materials.

The unit also includes several shelves and tubs for storing books, supplies, and other classroom essentials. The shelves are adjustable, so you can customize the height and spacing to accommodate different sizes of materials. The tubs are removable, so you can easily transport them to different locations in the classroom.

B M6 15mm bolt

Before beginning, you should have:

A M6 30mm bolt

22x

E lock washer

32x

Additional tools required: Adjustable wrench

Base

(Not to Scale)

Royal Reading Writing Center - Parts

(Not to Scale)

3” Caster

Center Frame

Lower Frame

Upper Frame

Stretcher

Rear Whiteboard

Hooks

Front Frame Support

Front Frame

Shelf

M-Rack

Tub Channel

Chart Loop Hook

Safety Cap

Book Ledge

Open Tub

Hardware

Actual Size

Contents - Box 1

In Box 1In Box 1

Whiteboard Channel

Contents - Box 2

F M6 nut

Small Tub

Front Tub Bar

Back Tub Bar

Page Paw

Rear Whiteboard

G M6 barrel nut

H M8 lock

washer

Tiny Tub

C M6 25mm bolt

D M6

Acorn Nut

RC146 - Version D - 13 November 2009 - Copernicus Educational Products Inc.

This symbol denotes a 2 Person Task. For safety, please ensure that there are two

people working on steps displaying this symbol

Watch for this symbol throughout the Assembly Instructions. Wherever you see it, pay

close attention. The symbol denotes a step needing extra attention to ensure it is done

correctly

The Star symbol highlights an advisory note

Tips for Assembly - Using this Manual

2 Person Task

Watch for These Helpful Symbols

Before You Begin

As You Assemble the Unit

Layout and identify all of the included parts

The hardware has been packed according to size, separate them based on those sizes

Read the assembly instructions over once to familiarize yourself with them

Please note that in its unassembled state, this product contains parts that can be a

hazard to small children; it should be assembled by an adult

If you have a cordless drill, a hex head driver bit has been included for use. This will

help to speed up assembly. Make sure that the torque is on a low setting, to ensure the

bolt head does not get stripped

Follow the steps in sequence

Before beginning each step, find the part(s) that you need for that step

Pay attention to the labeling on the parts, they are there to help direct you at certain stages

The title of each step states what you will be doing. Review the text and the pictures as you

build the unit

After Assembly; Before Use

Remove the plastic film from the Whiteboard before writing on it

Clean the Whiteboard surface well with soapy water and then rinse clean

RC146 - Version D - 13 November 2009 - Copernicus Educational Products Inc.

Install Casters

You should begin the installation with the brakes in the UP position

Note: The front of the Base is the end with the brake mechanism

Press Casters firmly into the base

- Caster will click into place

- If necessary, place a wrench between the wheels & tap in with a rubber mallet.

Repeat for remaining Base

Base x 2 Caster x 4

You will need: (Not to Scale)

Actual Size:

Do not tighten any fasteners, unless instructed

Front

RC146 - Version D - 13 November 2009 - Copernicus Educational Products Inc.

Install Center Frame & Rear Frame Lower

Center Frame x 1

Rear Frame Lower x 2

You will need: (Not to Scale)

x 4 x 4

Actual Size:

Slide Center Frame into the front holes of the Base &

of the Base

- Fasten with four Bolt A’s & Washer E’s

- Tighten bolts

Front of the Base is the end with the Brake

Note the orientation of the Rear Frame Lower’s - They

bend back towards the Back of the Unit

Lower Frames into the rear holes

Note - Front of base is the

end with the brake

Front

Note

Orientation

Back

RC146 - Version D - 13 November 2009 - Copernicus Educational Products Inc.

Install Tub Channels

Identify Top & Bottom of Tub Channels

Align a Tub Channel with the top holes in the Rear Lower and/or Center Frame

- Fasten with two Bolt A’s & Washer C’s

- Tighten bolts

Repeat for remaining Tub Channel

Tub Channel x 2

You will need: (Not to Scale)

Actual Size:

x 4

Use top holes

Top

Bottom

RC146 - Version D - 13 November 2009 - Copernicus Educational Products Inc.

Slide Rear Frame Upper Assembly onto Rear Frame Lower Assembly

Align one of the Stretchers with the holes that will connect the Lower Frame to the

Upper Frame

- Fasten with two Bolt A’s & Washer E’s

- Tighten bolts

Align the remaining Stretcher with the holes in the Upper Frame

- Slide Rear Whiteboard Hooks on before fastening

- Fasten with two Bolt A’s & Washer E’s

- Tighten bolts

Build Rear Frame

Rear Frame Upper x 2

Stretcher x 2

You will need: (Not to Scale)

x 4 x 4

Actual Size:

Rear Whiteboard Hook x 2

Hooks slide on

prior to assembly

Washer E

Bolt A

RC146 - Version D - 13 November 2009 - Copernicus Educational Products Inc.

Install Front Frame Supports

Align the end of the Left Front Frame Support marked with a dot with the hole marked

with a dot sticker in the Center Frame.

- Fasten with one Bolt A & Washer E

- Tighten bolt

Repeat for other side with remaining Front Frame Support

Front Frame Support x 2

You will need: (Not to Scale)

x 2 x 2

Actual Size:

Use labels to help you

assemble correctly

Washer E

Bolt A

RC146 - Version D - 13 November 2009 - Copernicus Educational Products Inc.

Install Shelf

Align the holes in the Shelf with the holes in the Assembled Frame

- Fasten with four Bolt C’s, Washer E’s & Nut D’s

- Tighten bolts

Note the orientation of the Shelf when you assemble it

Shelf x 1

You will need: (Not to Scale)

Actual Size:

x 4 x 4

Note

orientation

x 4

Washer E

Nut D

Bolt C

RC146 - Version D - 13 November 2009 - Copernicus Educational Products Inc.

Install Lower Tub Supports

Align the Back Tub Bar (Marked with a B) with the lowest holes in the Rear Lower Frames

- The Back Tub Bar is the one marked with a B sticker

- Fasten with two Bolt A’s & Washer E’s

- Tighten bolts

Align the Front Tub Bar (Marked with an A) with the lowest holes in the Center Frame

- The Front Tub Bar is the one marked with an A Sticker

- Fasten with two Bolt A’s & Washer E’s

- Tighten bolts

Front Tub Bar x 1

(Marked with an A)

You will need: (Not to Scale)

Actual Size:

x 4

Back Tub Bar x 1

(Marked with a B)

Bolt A

Washer E

RC146 - Version D - 13 November 2009 - Copernicus Educational Products Inc.

Build Front Frame Assembly

Slide Whiteboard as far upwards as it will go

Slide Whiteboard Channel up to the Whiteboard surface

Fasten the Whiteboard Channel in place

- Use two Bolt B’s, Washer H’s & Nut G’s

- Tighten fasteners

Front Frame Assembly x 1

You will need: (Not to Scale)

Actual Size:

Whiteboard Channel x 1

x 2 x 2

x 2

Washer H

Nut G

Bolt B

RC146 - Version D - 13 November 2009 - Copernicus Educational Products Inc.

Attach Whiteboard

Put Brakes in the locked/down position to hold the unit steady

Align the holes in the Front Frame Assembly with the Rear Frame and the Front Frame

Supports

- Fasten with four Bolt A’s & Washer E’s

- Tighten Bolts

- It is easiest to fasten the top first, then the bottom bolts

Peel off the plastic film on the Whiteboard before use

Front Frame Assembly x 1

You will need: (Not to Scale)

x 4

Actual Size:

Peel plastic film

before use

Bolt A

Washer E

RC146 - Version D - 13 November 2009 - Copernicus Educational Products Inc.

Install Book Ledge

Note: There are multiple locations on the side of the Whiteboard to install the Book

Ledge. Choose the location that works the best for your classroom.

Insert one hook into the appropriate hole on one side of the Whiteboard Frame

Pull out opposite hook & snap into place

Note: The spring tension is designed to discourage children from unhooking the Book

Ledge

Safety Cap Bookledge x 1

You will need: (Not to Scale)

RC146 - Version D - 13 November 2009 - Copernicus Educational Products Inc.

Install Big Book Rack Divider M-Racks

Align the M Racks with the holes in the Shelf

- Fasten with two Bolt B’s, Washer E’s, and Nut F’s

- Tighten Bolts

Repeat for remaining two M-Racks

Note orientation of the M-Racks. The two outside M-Racks are to

be installed so that the bend faces inward

You will need: (Not to Scale)

M-Rack (inner) x 1

x 6

Bolt B

Washer E

Nut F

M-Rack (outer) x 2

RC146 - Version D - 13 November 2009 - Copernicus Educational Products Inc.

Place Tubs into Unit

Angle the Tubs slightly when inserting into the Channel; tilt to fit over stop rib, and

then slide into place

In position, tubs will slide smoothly in the Channels & be stopped from sliding out

unintentionally

Two Open Tubs slide in Channels, the remaining three Open & one Small Tub

rest on the Tub Bars

Open Tub x 5

You will need: (Not to Scale)

Small Tub x 1

RC146 - Version D - 13 November 2009 - Copernicus Educational Products Inc.

Attach Chart Paper Hooks

Place an empty hardware bag over the frame to prevent the unit from being scratched

- Hooks snap onto the frame easily

Slide bag free once the Hook has been snapped onto the Frame

Chart Paper Hooks x 2

You will need: (Not to Scale)

Plastic Bag

RC146 - Version D - 13 November 2009 - Copernicus Educational Products Inc.

Copernicus King Royal RC146 Assembly Manual

Copernicus King Royal RC146 Assembly Manual

Copernicus King Royal RC146 Assembly Manual

Related papers

Other documents