2. Enwork
  3. Whiteboards

Enwork Whiteboards Installation guide

  • Hello! I've reviewed the installation instructions for the Zori ZI0005 Whiteboard. This document outlines the assembly process, including the necessary parts and tools. The whiteboard features casters for mobility and a sturdy frame for stability. I am ready to assist with any questions you might have about the information contained within.
  • What parts are included in the package?
    What tools are required for assembly?
    How do you assemble the frame?
1
03/04/2019 - Rev A
ZORI WHITEBOARD
INSTALLATION INSTRUCTIONS
TRAINING TABLES
ZI0005
2
INSTALLATION GUIDE
1) PARTS AND FASTENERS INCLUDED
2) TOOLS AND SUPPLIES REQUIRED
Zori Feet (4) 5/16-18 1.25 Nylock Nut (4)
CSTCCx ³/8-16 Casters (4)
Whiteboard Frame
5/16-18 x 1.25” Flange Bolts (4)
Racheting ¹/2 Wrench
3
INSTALLATION GUIDE
3) ASSEMBLY OVERVIEW:
FIGURE 1
FIGURE 2
FIGURE 3
1. Thread the bolt through the hole in the whiteboard
frame. Place the nut in the foot and tighten with the
ratcheting wrench. (Figure #1)
2. Screw the caster onto the foot. (Figure #2)
3. Repeat three times until all four legs are attached.
(Figure #3)
Specications subject to change without notice.
Rev 02.2020
1.800.815.7251
www.enwork.com
12900 Christopher Dr. Lowell, MI 49331
/