Zebra ST6050 Owner's manual

Type
Owner's manual
Page 1 of 2 Part Number 1005722-001 Revision A
Installation Instruction for ST6050 Soft Shell Holster
Usability
The Soft Shell Holster can be worn on either side of the body, allowing for right or left handed user. Select the best
orientation for your specific application. See Figure 1.
Soft Shell Holsters come default to right handed use.
Figure 1
Left Handed Use Right Handed Use
Tether on
outside of
Holster, away
from bod
y
.
Leg Strap on
inside of Holster,
toward body.
Page 2 of 2 Part Number 1005722-001 Revision A
1. Placing the Soft
Shell Holster on the
preferred side and
clip buckle together.
Tighten as needed.
See Figure 2.
Figure 2
Figure 3
Installation
Appendix A: Support Services
Fortechnicalsupport,pleasevisittheSupportsectionofourcommunityIngenuityWorking:http://community.psion.com/support
.
3. Install tether by passing D-ring through the bottom of
the pistol grip.
Then hook D-ring with tether Snap Hook.
2. Attach Leg Strap.
Clip buckle together
and pull snug.
See Figure 3.
4. Always holster the
Handheld in the
scanner side down
position to ensure a
more secure fit.
As shown in Figure 6.
Figure 4 Figure 5
Figure 6
  • Page 1 1
  • Page 2 2

Zebra ST6050 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI