Page 1 of 2 Part Number 1005722-001 Revision A
Installation Instruction for ST6050 Soft Shell Holster
Usability
The Soft Shell Holster can be worn on either side of the body, allowing for right or left handed user. Select the best
orientation for your specific application. See Figure 1.
Soft Shell Holsters come default to right handed use.
Figure 1
Left Handed Use Right Handed Use
Tether on
outside of
Holster, away
from bod
y
.
Leg Strap on
inside of Holster,
toward body.
Page 2 of 2 Part Number 1005722-001 Revision A
1. Placing the Soft
Shell Holster on the
preferred side and
clip buckle together.
Tighten as needed.
See Figure 2.
Figure 2
Figure 3
Installation
Appendix A: Support Services
Fortechnicalsupport,pleasevisittheSupportsectionofourcommunityIngenuityWorking:http://community.psion.com/support
.
3. Install tether by passing D-ring through the bottom of
the pistol grip.
Then hook D-ring with tether Snap Hook.
2. Attach Leg Strap.
Clip buckle together
and pull snug.
See Figure 3.
4. Always holster the
Handheld in the
scanner side down
position to ensure a
more secure fit.
As shown in Figure 6.
Figure 4 Figure 5
Figure 6
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Zebra Technologies UZ7SB1 User manual
-
Motorola SB1 User manual
-
Psion Teklogix WORKABOUT PRO M/C User manual
-
3M DBI-SALA® Tape Measure Holster Operating instructions
-
LXE MX7 User manual
-
-
Symbol Technologies MC3000 User manual
-
LXE MX3X User manual
-
Dörr Fidlock User manual
-
Motorola MC3000 User manual
