American Standard Petal 0680.000 User manual

Brand: American Standard

Model: Petal 0680.000

Type: User manual

J17

PETAL™

ABOVE-COUNTER SINK

VITREOUS CHINA

PETAL™ ABOVE-COUNTER SINK

• Distinctive  oral design in shape of petal

• Made from vitreous china

• Sink rim rises above counter or cabinet top

• Sink without over ow

❏ 0680.000

Nominal Dimensions:

400mm (15-3/4") Round

Bowl sizes:

318mm (12-1/2") round

95mm (3-3/4") deep

Compliance Certi cations -

Meets or Exceeds the Following Speci cations:

• ASME A112.19.2M for Vitreous China Fixtures

To Be Speci ed:

❏ Color:

❏ Faucet*:

❏ Faucet Finish:

❏ Supplies:

❏ 1-1/4" Trap:

* See faucet section for additional models available

NOTES:

DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE

SUGGESTED.

FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE

TEMPLATE SUPPLIED WITH SINK.

IN-FIELD ADJUSTMENT OF POP-UP ROD EXTENSION REQUIRED.

PROVIDE A 2-1/2" OFF-SET BEND FOR PROPER OPERATION.

IMPORTANT: Dimensions of  xtures are nominal and may vary within the

range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility

is assumed for use of superseded or voided pages.

Revised 5/05

COUNTERTOP

CUTOUT 267mm

(10-1/2) DIA.

76mm

(3)

76mm

(3)

SEALING

COMPOUND

178mm

(7)

FINISHED WALL

OR SPLASHBACK

203mm

(8)

1-1/4 O.D.

WASTE

SUPPLIES

AS REQ'D

159mm

(6-1/4)

216mm

(8-1/2)

COUNTERTOP

(BY OTHERS)

C/L

216mm

(8-1/2)

51mm

(2) MIN.

51mm

(2) MIN.

400mm REF.

(15-3/4)

203mm

(8)

(3) 32mm

(1-1/4) DIA. HOLES

432mm

(17)

1-1/4 O.D.

TAILPIECE

FINISHED

FLOOR

787mm

(31)

SUGGESTED

American Standard Petal 0680.000 User manual

American Standard Petal 0680.000 User manual

American Standard Petal 0680.000 User manual

Related papers

Other documents