NEC LCD2110 User manual

MultiSync LCD

2110

User’s Manual

78134811.PM5 99.12.24, 2:19 PM1

We hereby certify that the colour monitors

MultiSync LCD2110 (LA-2141JMW-P)

are in compliance with

Council Directive 73/23/EEC:

- EN 60950

Council Directive 89/336/EEC:

- EN 55022

- EN 61000-3-2

- EN 61000-3-3

- EN 55024

and marked with

NEC Home Electronics, LTD.

686-1, Nishioi Oi-Machi

Ashigarakami-gun

Kanagawa 258-8533, Japan

Declaration of the Manufacture

78134811.PM5 99.12.24, 2:19 PM3

Safety Instruction

Caution:

When operating the LA-2141JMW-P with a 220-240V

AC power source

in Europe except UK, use the power cord provided with the monitor.

In UK, a BS approved power cord with moulded plug has a Black (five

Amps) fuse installed for use with this equipment. If a power cord is not

supplied with this equipment please contact your supplier.

When operating the LA-2141JMW-P with a 220-240V

AC Power source

in Australia, use the power cord provided with the monitor.

For all other cases, use a power cord that matches the AC voltage of the

power outlet and has been approved by and complies with the safety

standard of your particular country.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT

USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS

THE PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM

WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE

POWER CORD FROM THE AC OUTLET.DO NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric

shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has

been included. Therefore, it should be read carefully in order to avoid any problems.

IBM PC/XT/AT, PS/2, MCGA, VGA, 8514/A and XGA are registered trademarks of

International Business Machines Corporation.

Apple and Macintosh are registered trademarks of Apple Computer Inc.

Microsoft and Windows are registered trademarks of the Microsoft Corporation.

NEC is a registered trademark of NEC Corporation. ErgoDesign, IPM, OSM and ColorControl

are trademarks of NEC Home Electronics, Ltd.

MultiSync is a registered trademark of NEC Technologies, Inc in U.S., and of NEC Home

Electronics, Ltd in Canada, U.K., Germany, France, Spain, Italy, Austria, Benelux,

Switzerland, Denmark, Finland, Norway and Saudi Arabia.

All other trademarks or registered trademarks are property of their respective owners.

78134811.PM5 99.12.24, 2:19 PM4

For the Customer to use in U.S.A or Canada.

Canadian Department of Communications Compliance

Statement

DOC: This Class B digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du

Règlement sur le matériel brouiller du Canada.

C-UL: Bears the C-UL Mark and is in compliance with Canadian

Safety Regulations according to C.S.A. C22.2 #950.

Ce produit porte la marque ‘C-UL’ et se conforme aux règlements de

sûrele Canadiens selon CAN/CSA C22.2 No. 950.

FCC Information

1. Use the attached specified cables with the LA-2141JMW-P

colour monitors so as not to interfere with radio and television

reception.

(1) The power supply cord you use must have been approved by

and comply with the safety standards of U.S.A.,and meet the

following condition.

(2) Please use the supplied AC Adapter. (TYPE A2440S01)

(3) MultiSync LCD

2110 monitor: Shielded 15-pin VGA to

BNC cable.

Use of other cables and adapters may cause interference

with radio and television reception.

2. This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio

frequency energy, and, if not installed and used in accordance

Power supply cord Non shield type,3-conductor

Length 1.8m

Plug shape

78134811.PM5 99.12.24, 2:19 PM5

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and

receiver.

- Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

- Consult your dealer or an experienced radio/TV

technician for help.

If necessary, the user should contact the dealer or an

experienced radio/television technician for additional

suggestions. The user may find the following booklet,

prepared by the Federal Communications Commission,

helpful: “How to Identify and Resolve Radio-TV Interference

Problems. ” This booklet is available from the U.S.

Government Printing Office, Washington, D.C., 20402, Stock

No. 004-000-00345-4.

U.S. Responsible Party: NEC Technologies,Inc.

Address: 1250 North Arlington Heights Road

Itasca,Illinois 60143-1248

Tel.No.: (630) 467-5000

DECLARATION OF CONFORMITY

This device complies with Part 15 of FCC Rules. Operation is subject to the following

two conditions. (1)This device may not cause harmful interference,and (2) this device

must accept any interference received ,including interference that may cause undesired

operation.

Type of Product: Computer Monitor

Equipment Classification: Class B Peripheral

Models: LA-2141JMW-P

We hereby declare that the equipment specified above

conforms to the technical standards as specified in the FCC Rules.

78134811.PM5 99.12.24, 2:19 PM6

TCO'99

LA-2141JMW-P

Congratulations!

You have just purchased a TCO'99 approved

and labelled product! Your choice has provided

you with a product developed for professional

use. Your purchase has also contributed

to reducing the burden on the environment

and also to the further development of

environmentally adapted electronics products.

Why do we have environmentally labelled computers?

In many countries, environmental labelling has become an established

method for encouraging the adaptation of goods and services to the

environment. The main problem, as far as computers and other

electronics equipment are concerned, is that environmentally harmful

substances are used both in the products and during their manufacture.

Since it is not so far possible to satisfactorily recycle the majority of

electronics equipment, most of these potentially damaging substances

sooner or later enter nature.

There are also other characteristics of a computer, such as energy

consumption levels, that are important from the viewpoints of both

the work (internal) and natural (external) environments. Since all

methods of electricity generation have a negative effect on the

environment (e.g. acidic and climate-influencing emissions,

radioactive waste), it is vital to save energy. Electronics equipment

in offices is often left running continuously and thereby consumes a

lot of energy.

What does labelling involve?

This product meets the requirements for the TCO'99 scheme which

provides for international and environmental labelling of personal

computers. The labelling scheme was developed as a joint effort by

the TCO (The Swedish Confederation of Professional Employees),

78134811.PM5 99.12.24, 2:19 PM7

Svenska Naturskyddsforeningen (The Swedish Society for Nature

Conservation) and Statens Energimyndighet (The Swedish National

Energy Administration).

Approval requirements cover a wide range of issues: environment,

ergonomics, usability, emission of electric and magnetic fields,

energy consumption and electrical and fire safety.

The environmental demands impose restrictions on the presence and

use of heavy metals, brominated and chlorinated flame retardants,

CFCs (freons) and chlorinated solvents, among other things. The

product must be prepared for recycling and the manufacturer is

obliged to have an environmental policy which must be adhered to

in each country where the company implements its operational policy.

The energy requirements include a demand that the computer and/or

display, after a certain period of inactivity, shall reduce its power

consumption to a lower level in one or more stages. The length of

time to reactivate the computer shall be reasonable for the user.

Labelled products must meet strict environmental demands, for

example, in respect of the reduction of electric and magnetic fields,

physical and visual ergonomics and good usability.

Below you will find a brief summary of the environmental

requirements met by this product. The complete environmental

criteria document may be ordered from:

TCO Development

SE-114 94 Stockholm, Sweden

Fax: +46 8 782 92 07

Email (Internet): [email protected]

Current information regarding TCO'99 approved and labelled

products may also be obtained via the Internet, using the address:

http://www.tco-info.com/

78134811.PM5 99.12.24, 2:19 PM8

Environmental requirements

Flame retardants

Flame retardants are present in printed circuit boards, cables, wires,

casings and housings. Their purpose is to prevent, or at least to delay

the spread of fire. Up to 30% of the plastic in a computer casing can

consist of flame retardant substances. Most flame retardants contain

bromine or chloride, and those flame retardants are chemically related

to another group of environmental toxins, PCBs. Both the flame

retardants containing bromine or chloride and the PCBs are suspected

of giving rise to severe health effects, including reproductive damage

in fish-eating birds and mammals, due to the bio-accumulative*

processes. Flame retardants have been found in human blood and

researchers fear that disturbances in foetus development may occur.

The relevant TCO'99 demand requires that plastic components

weighing more than 25 grams must not contain flame retardants with

organically bound bromine or chlorine. Flame retardants are allowed

in the printed circuit boards since no substitutes are available.

Cadmium**

Cadmium is present in rechargeable batteries and in the colour-

generating layers of certain computer displays. Cadmium damages

the nervous system and is toxic in high doses.

The relevant TCO'99 requirement states that batteries, the colour-generating

layers of display screens and the electrical or electronics components must

not contain any cadmium.

Mercury**

Mercury is sometimes found in batteries, relays and switches. It

damages the nervous system and is toxic in high doses.

The relevant TCO'99 requirement states that batteries may not contain any

mercury. It also demands that mercury is not present in any of the electrical

or electronics components associated with the labelled unit.

78134811.PM5 99.12.24, 2:19 PM9

AppendixEspañolFrançaisDeutsch

English

Italiano

CFCs (freons)

The relevant TCO'99 requirement states that neither CFCs nor HCFCs

may be used during the manufacture and assembly of the product. CFCs

(freons) are sometimes used for washing printed circuit boards. CFCs

break down ozone and thereby damage the ozone layer in the

stratosphere, causing increased reception on earth of ultraviolet light

with e.g. increased risks of skin cancer (malignant melanoma) as a

consequence.

Lead**

Lead can be found in picture tubes, display screens, solders and

capacitors. Lead damages the nervous system and in higher doses, causes

lead poisoning.

The relevant TCO´99 requirement permits the inclusion of lead since

no replacement has yet been developed.

* Bio-accumulative is defined as substances which accumulate within living organisms

** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.

78134811.PM5 99.12.24, 2:19 PM10

Page is loading ...

AppendixEspañolFrançaisDeutsch

English

Italiano

D - 19 Technische Daten

MultySync LCD2110

Anzeige: 54.1 cm (21.3 Zoll) sichtbarer Bereich; Aktiv Matrix

Dünnfilm Transistor (TFT) LCD-Anzeige; 0.27 mm Dot

Pitch max. Auflösung 1600 x 1200; 180 cd/m

2

Leuchtstärke;

Kontrast 250:1.

Eingangssignal: Video Analog 0,7 Vp-p/75 Ohm

Sync Separate Sync. TTL-Pegel

Horizontal Sync. Positiv/Negativ

Vertikal Sync. Positiv/Negativ

Composite Sync. TTL-Pegel

Positiv/Negativ

Sync. On Green video 0,7 Vp-p Positiv

und Sync. 0,3 Vp-p Negativ

Darstellbare Farben

Analoges unbegrenzte Anzahl von Farben

Eingangssignal

(abhängig von der benutzten Grafikkarte)

Synchronisation Horizontal 24,0 kHz bis 82,0 kHz (automatisch)

Vertikal 56,0 kHz bis 76,0 Hz (automatisch)

Unterstütze Formate

Querformat: 720 x 400*: VGA Text

640 x 480* : 60 Hz bis 76 Hz

800 x 600: 56 Hz bis 76 Hz

832 x 624*: 75 Hz

1024 x 768*: 60 Hz bis 76 Hz

1280 x 960* : 60 Hz bis 76 Hz

1280 x1024* : 60 Hz bis 76 Hz

1600 x 1200**: 60 Hz

Hochformat: 480 x 640* : 60 Hz bis 76 Hz

600 x 800: 56 Hz bis 76 Hz

624 x 832*: 75 Hz

768 x 1024*: 60 Hz bis 76 Hz

960 x 1280* : 60 Hz bis 76 Hz

1024 x 1280* : 60 Hz bis 76 Hz

1200 x 1600**: 60 Hz

Aktivanzeige Querformat Horizontal: 432 mm

Vertikal: 324 mm

Hochformat Horizontal: 324 mm

Vertikal 432 mm

78134811.PM5 99.12.24, 2:19 PM50

Page is loading ...

AppendixEspañolFrançaisDeutsch

English

Italiano

App. A PIN ASSIGNMENTS

LCD 2110 SIGNAL INPUT CONNECTOR

A - 1 App. A PIN ASSIGNMENTS

R

G ( /SYNC)

B

HS/CS

VS

5 4 3 2 1

10

9 8 7 6

15 14 13 12

11

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

RED

GREEN

BLUE

GROUND

+ 5 V (DDC)

GROUND

SDA

H. SYNC. ,H / V SYNC.

V. SYNC.

SCL

No.

mini D-sub 15pin

(female)

MINI D-SUB 15 PIN

BNC connector

78134811.PM5 99.12.24, 2:20 PM120

AppendixEspañolFrançaisDeutsch

English

Italiano

App. B Preset Signal Timing LCD2110

Preset Resolution Vertical Horizontal Pixel

Frequency (Hz) Frequency (kHz) Frequency (MHz)

1 720 x 350 70.09 31.47 28.32

2 640 x 400 56.43 24.83 21.05

3 720 x 400 70.09 31.47 28.32

4 640 x 480 59.99 31.47 25.18

5 640 x 480 66.67 35.00 30.24

6 640 x 480 72.81 37.86 31.50

7 640 x 480 75.00 37.50 31.50

8 800 x 600 56.25 35.16 36.00

9 800 x 600 60.32 37.88 40.00

10 800 x 600 75.00 46.88 49.50

11 800 x 600 72.19 48.08 50.00

12 832 x 624 74.55 49.73 57.28

13 1024 x 768 60.00 48.36 65.00

14 1024 x 768 65.07 52.45 70.49

15 1024 x 768 70.07 56.48 75.00

16 1024 x 768 75.03 60.02 78.75

17 1280 x 960 60.00 60.00 108.00

18 1280 x 960 75.00 75.00 126.00

19 1280 x 1024 60.02 63.98 108.00

20 1280 x 1024 66.69 71.69 117.00

21 1280 x 1024 75.03 79.98 135.00

22 1280 x1024 76.11 81.13 135.00

23

* 1600 x 1200 60.00 75.00 162.00

* Recommended timing

App. B Preset Signal Timing LCD2110 A - 2

78134811.PM5 99.12.24, 2:20 PM121

NEC LCD2110 User manual

This manual is also suitable for

NEC LCD2110 User manual

in other languages

Related papers

Other documents