JVC Car Stereo System GET0163-001A User manual

Brand: JVC

Model: Car Stereo System GET0163-001A

Category: Car media receivers

Type: User manual

This manual is also suitable for

CD RECEIVER KD-S845

ENGLISH

GET0163-001A

[U]

CD  !" KD-S845

‡§√◊ËÕß‡≈Ëπ CD KD-S845



‰∑¬

For installation and connections, refer to the separate manual.

 !"#$%&'()*+,-./0

°√ÿ≥“¥Ÿ§ŸË¡◊Õ∑’Ë·¬°µË“ßÀ“° „π°“√µ‘¥µ—Èß·≈–°“√‡™◊ËÕ¡µËÕ

INSTRUCTIONS

 !"

§”·π–π”

45Wx4

TUNER

SCM

RND

RPT

KD-S845

ENCOVER-KD-S845[U]f 28/1/03, 12:57 pm2

ENGLISH

IMPORTANT FOR LASER PRODUCTS

Precautions:

1.CLASS 1 LASER PRODUCT

2.CAUTION: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure

to beam.

3.CAUTION: Do not open the top cover. There are no user-serviceable parts inside. Leave all

servicing to qualified service personnel.

4.CAUTION: This CD player uses invisible laser radiation and is equipped with safety switches to

prevent radiation emission when unloading CDs. It is dangerous to defeat the safety switches.

5.CAUTION: Use of controls, adjustments or performance of procedures other than those specified

herein may result in hazardous radiation exposure.

How to reset your unit

While holding SEL (select), press (standby/on/attenuator) for more than 2 seconds.

This will reset the built-in microcomputer.

Notes:

• Your preset adjustments – such as preset channels or sound adjustments – will also be erased.

• If a CD is in the unit, it will eject when you reset the unit. Be careful not to drop the CD.

SEL (select)

(standby/on/attenuator)

EN02-06.KD-S845[U]f 1/28/03, 11:52 AM2

ENGLISH

CONTENTS

Thank you for purchasing a JVC product. Please read all instructions carefully before operation,

to ensure your complete understanding and to obtain the best possible performance from the unit.

How to reset your unit .............................. 2

LOCATION OF THE BUTTONS ........... 4

Control panel ............................................ 4

Remote controller ..................................... 5

Preparing the remote controller ............... 6

BASIC OPERATIONS ...................... 7

Turning on the power ............................... 7

RADIO OPERATIONS ..................... 8

Listening to the radio ................................ 8

Storing stations in memory ...................... 10

Tuning in to a preset station ..................... 11

Other convenient tuner functions ............. 11

CD OPERATIONS .......................... 12

Playing a CD ............................................ 12

Locating a track or a particular portion

on a CD ................................................. 13

Selecting CD playback modes ................. 13

Playing a CD Text ..................................... 14

Prohibiting CD ejection ............................ 14

MP3 INTRODUCTION ..................... 15

What is MP3? ........................................... 15

How are MP3 files recorded and

played back? ......................................... 15

MP3 OPERATIONS ........................ 17

Playing an MP3 disc ................................ 17

Locating a file or particular portion on

an MP3 disc .......................................... 18

Selecting MP3 playback modes ............... 19

SOUND ADJUSTMENTS .................. 21

Adjusting the sound ................................. 21

Turning on/off the loudness function ........ 21

Using the sound control memory (SCM) ... 22

Storing your own sound adjustments ....... 23

OTHER MAIN FUNCTIONS ............... 24

Setting the clock ....................................... 24

Canceling Advanced SCM—SCM LINK .... 25

Selecting the level display—LEVEL ......... 25

Selecting the scroll mode—SCROLL ........ 26

To turn the tag display on or off—

TAG DISP ............................................. 26

Detaching the control panel ..................... 27

MAINTENANCE ............................ 28

Handling discs .......................................... 28

TROUBLESHOOTING ..................... 29

SPECIFICATIONS .......................... 31

BEFORE USE

For safety....

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

Temperature inside the car....

If you have parked the car for a long time in hot or

cold weather, wait until the temperature in the car

becomes normal before operating the unit.

EN02-06.KD-S845[U]f 2/7/03, 4:33 PM3

ENGLISH

45Wx4

TUNER

SCM

RND

RPT

KD-S845

BAND

23 4

89 p

;

s d f

LOCATION OF THE BUTTONS

Display window

1 (standby/on/attenuator) button

2 Control dial

3 LOUD button

4 Display window

5 Loading slot

6 ∞ (down) button

7 CD TUNER button

8 5 (up) BAND button

9 0 (eject) button

p ¢

/4 buttons

•

Also functions as SSM buttons when pressed

together.

q SEL (select) button

w Remote sensor

e DISP (display) button

r Number buttons

t SCAN

RPT (repeat) button

y MO (monaural)

RND (random) button

u SCM (sound control memory) button

(control panel release) button

Display window

o Volume (or audio) level indicator

Equalization pattern indicator

; FM band indicator (FM1, FM2, FM3)

a CD source indicator

s DISC indicator

d DIRECTORY indicator

f FILE indicator

g Tuner reception indicators

MO (monaural), ST (stereo) indicator

h RND (random) indicator

j RPT (repeat) indicator

k SCM (sound control memory) indicator

l LOUD (loudness) indicator

/ AM indicator

z Main display

x CD–in indicator

c Sound mode indicators

BEAT, SOFT, POP

Control panel

EN02-06.KD-S845[U]f 1/28/03, 11:52 AM4

ENGLISH

RM-RK50

Remote controller

SOUND

VOL

SOURCE

ATT

3 • Selects the preset stations while listening to

the radio.

Each time you press the button, the preset

station number increases, and the selected

station is tuned in.

• Skips to the first file of the previous directory

while listening to an MP3 disc. Each time

you press the button, you can move to the

previous directory and start playing the first

file.

4 Functions the same as the control dial on the

main unit.

NOTE:

These buttons cannot be used for the

CLOCK H, CLOCK M, SCM LINK,

LEVEL, SCROLL and TAG DISP

adjustments. (See page 24 – 26).

5 Selects the sound mode.

Each time you press the button, the sound

mode changes.

6 Selects the source.

Each time you press the button, the source

changes.

7 • Searches stations while listening to the radio.

• Fast-forwards or reverses the track/file if

pressed and held while listening to a disc.

• Skips to the beginning of the next track/file or

goes back to the beginning of the current (or

previous) tracks/files if pressed briefly while

listening to a disc.

1 • Turns on the unit if pressed when the unit is

turned off.

• Turns off the unit if pressed and held until “SEE

YOU” appears on the display.

• Drops the volume level in a moment if pressed

briefly.

Press again to resume the volume.

2 • Selects the band while listening to the radio.

Each time you press the button, the band

changes.

• Skips to the first file of the next directory

while listening to an MP3 disc.

Each time you press the button, you can

move to the next directory and start playing

the first file.

This unit can be remotely controlled as instructed

here (with an optionally purchased remote

controller). We recommend that you use remote

controller RM-RK50 with your unit.

EN02-06.KD-S845[U]f 1/28/03, 11:52 AM5

ENGLISH

Lithium coin battery

(product number:

CR2025)

Remote sensor

(back side)

Preparing the remote controller

Before using the remote controller:

• Aim the remote controller directly at the remote

sensor on the main unit. Make sure there is no

obstacle in between.

• Do not expose the remote sensor to strong

light (direct sunlight or artificial lighting).

Installing the battery

When the controllable range or effectiveness of the

remote controller decreases, replace the battery.

1. Remove the battery holder.

1) Push out the battery holder in the direction

indicated by the arrow using a ball-point

pen or a similar tool.

2) Remove the battery holder.

2. Place the battery.

Slide the battery into the holder with the + side

facing upwards so that the battery is fixed in

the holder.

3. Return the battery holder.

Insert again the battery holder pushing it until

you hear a clicking sound.

CAUTION:

DO NOT leave the remote controller in a place (such

as dashboards) exposed to direct sunlight for a long

time. Otherwise it may be damaged.

WARNING:

• Store the battery in a place where children cannot

reach.

If a child accidentally swallows the battery,

consult a doctor immediately.

• Do not recharge, short, disassemble or heat the

battery or dispose it in a fire.

Doing any of these things may cause the battery to

give off heat, crack or start a fire.

• Do not leave the battery with other metallic

materials.

Doing this may cause the battery to give off heat,

crack or start a fire.

• When throwing away or saving the battery, wrap it

in tape and insulate; otherwise, the battery may

start to give off heat, crack or start a fire.

• Do not poke the battery with tweezers or similar

tools.

Doing this may cause the battery to give off heat,

crack or start a fire.

(back side)

EN02-06.KD-S845[U]f 1/28/03, 11:52 AM6

ENGLISH

Adjust the sound as you want.

(See pages 21 – 23.)

To drop the volume in a moment

Press briefly while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

• If you turn the control dial clockwise, you can

also restore the sound.

To turn off the power

Press and hold for more than one second.

Note:

When you use this unit for the first time, set the built-in

clock correctly, see page 24.

CAUTION on Volume Setting:

Discs produce very little noise compared with

other sources. If the volume level is adjusted for

the tuner, for example, the speakers may be

damaged by the sudden increase in the output

level. Therefore, lower the volume before playing a

disc and adjust it as required during playback.

BASIC OPERATIONS

Turning on the power

Turn on the power.

Note on One-Touch Operation:

When you select a source in step 2 below, the

power automatically comes on. You do not have

to press this button to turn on the power.

Select the source.

To operate the tuner (FM or AM),

see pages 8 – 11.

To play a CD,

see pages 12 – 14.

To play an MP3 disc,

see pages 17 – 20.

Adjust the volume.

TUNER

SCM

RND

RPT

To increase the volume.

To decrease the volume.

Tuner

(FM1 – 3, AM)

TUNER

Volume or audio level indicator (See page 25.)

Volume level appears.

About mistracking:

Mistracking may result from driving on extremely

rough roads. This does not damage the unit and

the disc, but will be annoying.

We recommend that you stop disc playback while

driving on such rough roads.

EN07-07.KD-S845[U]f 2/13/03, 5:00 PM7

ENGLISH

RADIO OPERATIONS

Start searching a station.

When a station is received, searching

stops.

To stop searching before a station is received,

press the same button you have pressed for

searching.

To search stations of higher

frequencies.

Tuner

(FM1 – 3, AM)

TUNER

5BAND

FM1 FM2 FM3

To search stations of lower

frequencies.

Listening to the radio

You can use either automatic searching or manual

searching to tune in to a particular station.

Searching a station automatically:

Auto search

Select the tuner as the source.

• The last selected station is tuned in.

Select the band (FM1 – 3, AM) if

neccessary.

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to an

FM broadcast.

The last selected band appears.

Audio (see page 25) or volume level indicator

TUNER

SCM

RND

RPT

EN08-11.KD-S845[U]f 1/28/03, 11:55 AM8

ENGLISH

Searching a station manually:

Manual search

Select the tuner as the source.

• The last selected station is tuned in.

Select the band (FM1 – 3, AM) if

neccessary.

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to an

FM broadcast.

Press and hold ¢ or 4 until

“M (manual)” starts flashing on the

display.

Tune in to a station you want while “M”

is flashing.

• If you release your finger from the button,

the manual mode will automatically turn off

after 5 seconds.

• If you hold down the button, the frequency

keeps changing (in 50 kHz intervals for FM

and 9 kHz intervals for AM) until you release

the button.

When an FM stereo broadcast is hard to

receive:

Press MO RND (monaural/random) while

listening to an FM stereo broadcast.

• Each time you press the button, the MO

indicator lights up and goes off alternately.

When the MO indicator is lit on the display, the

sound you hear becomes monaural but the

reception will be improved (the ST indicator

goes off).

To restore the stereo effect, press the same

button again.

To tune in to stations of

higher frequencies.

Tuner

(FM1 – 3, AM)

TUNER

To tune in to stations of

lower frequencies.

5BAND

FM1 FM2 FM3

Selected band appears.

Lights up when receiving an

FM broadcast in stereo

RND

EN08-11.KD-S845[U]f 1/28/03, 11:55 AM9

ENGLISH

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FM1, FM2 or FM3).

These stations are preset in the number buttons —

No.1 (lowest frequency) to No.6 (highest frequency).

When automatic preset is over, the station stored

in number button 1 will be automatically tuned in.

Manual preset

You can preset up to 6 stations in each band (FM1,

FM2, FM3 and AM) manually.

Ex.: Storing an FM station of 88.3 MHz into the

preset number 1 of the FM1 band

Select the tuner as the source.

• The last selected station is tuned in.

Select the band (FM1 – 3, AM) you

want to store stations into (in this

example, FM1).

Tune in to a station (in this example,

of 88.3 MHz).

Storing stations in memory

You can use one of the following two methods to

store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band

(FM1, FM2 and FM3).

Select the tuner as the source.

• The last selected station is tuned in.

Select the FM band (FM1 – 3) you want

to store FM stations into.

Press and hold both buttons for more

than 2 seconds.

To tune in to stations of

higher frequencies.

5BAND

FM1 FM2 FM3

“SSM” appears, then disappears when automatic

preset is over.

Tuner

(FM1 – 3, AM)

TUNER

Tuner

(FM1 – 3, AM)

TUNER

5BAND

FM1 FM2 FM3

To tune in to stations of

lower frequencies.

EN08-11.KD-S845[U]f 1/28/03, 11:55 AM10

ENGLISH

Press and hold the number button (in

this example, 1) for more than 2

seconds.

Repeat the above procedure to store

other stations into other preset

numbers.

Notes:

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example, during

battery replacement). If this occurs, preset the stations

again.

“P1” flashes for a few seconds.

Tuning in to a preset station

You can easily tune in to a preset station.

Remember that you must store stations first. If you

have not stored them yet, see “Storing stations in

memory” on page 10 and 11.

Select the tuner as the source.

• The last selected station is tuned in.

Select the band (FM1 – 3, AM) if

neccessary.

Select the number (1 – 6) for the preset

station you want.

Other convenient tuner functions

Scanning broadcast stations

When you press SCAN RPT while listening to the

radio, station scanning starts. Each time a broadcast

is tuned in, scanning stops for about 5 seconds

(tuned frequency number flashes on the display),

and you can check what program is now being

broadcast.

If you want to listen to that program, press the same

button again to stop scanning.

8 9 10 11 127

Tuner

(FM1 – 3, AM)

TUNER

FM1 FM2 FM3

RPT

SCAN

EN08-11.KD-S845[U]f 1/28/03, 11:55 AM11

ENGLISH

Playing a CD

Insert a disc into the loading slot.

The unit turns on,

draws the CD and

starts playback

automatically.

Note on One-Touch Operation:

When a CD is already in the loading slot,

pressing the CD TUNER button turns on the unit

and starts playback automatically.

CD OPERATIONS

SCM indicator flashes.

Total track number

of the inserted disc

Total playing time of

the inserted disc

Elapsed playing time Current track

Notes:

• When a CD is inserted upside down, the CD

automatically ejects.

• When you play a CD text, the disc title and

performer appear on the display. Then the current

track and elapsed playing time appears on the

display. See also “Playing a CD text” (page 14) and

“Selecting the scroll mode—SCROLL” (page 26).

If a CD Text includes much text information, some

may not appear on the display.

To stop play and eject the CD

Press 0.

CD play stops and the CD automatically ejects

from the loading slot.

If you change the source to FM or AM, the CD

play also stops (without ejecting the CD this

time).

Notes:

• If the ejected disc is not removed for about 15

seconds, the disc is automatically inserted again

into the loading slot to protect it from dust.

(CD play will not start this time.)

• You can eject the CD even when the unit is

turned off.

The CD–in indicator lights up.

SCM indicator flashes.

The CD–in indicator flashes.

The CD–in indicator lights up.

TUNER

SCM

RND

RPT

EN12-20.KD-S845[U]f 1/28/03, 11:58 AM12

ENGLISH

Selecting CD playback modes

To play back tracks at random (Random Play)

You can play back all tracks on the CD at random.

Each time you press MO RND

(monaural/random) while playing

a CD, CD random play mode

turns on and off alternately.

When the random mode is turned on, the RND

indicator lights up on the display and a track

randomly selected starts playing.

To play back tracks repeatedly (Repeat Play)

You can play back the current track repeatedly.

Each time you press SCAN RPT

(scan/repeat) while playing a CD,

CD repeat play mode turns on and

off alternately.

When the repeat mode is turned on, the RPT

indicator lights up on the display.

Locating a track or a particular

portion on a CD

To fast-forward or reverse the track

To go to the next tracks or the previous

tracks

To go to a particular track directly

Press the number button corresponding to the

track number to start its playback.

• To select a track number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a track number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than

1 second.

The RND indicator

RND

The RPT indicator

Track number of the

currently playing track

Press and hold

¢ , while

playing a CD, to fast-forward

the track.

Press and hold

4 , while

playing a CD, to reverse

the track.

Press ¢

briefly, while

playing a CD, to go ahead to the

beginning of the next track.

Each time you press the button

consecutively, the beginning of

the next tracks is located and

played back.

Press 4

briefly, while

playing a CD, to go back to the

beginning of the current track.

Each time you press the button

consecutively, the beginning of

the previous tracks is located

and played back.

8 9 10 11 127

RPT

SCAN

EN12-20.KD-S845[U]f 1/28/03, 11:58 AM13

ENGLISH

Playing a CD Text

In a CD Text, some information about the disc

(its disc title, performer and track title) is recorded.

You can show these disc information on the display.

Select text display mode while playing a

CD Text.

Each time you press the button, the display changes

as follows:

Notes:

• The display shows up to 8 characters at one time

and scrolls if there are more than 8 characters.

See also “Selecting the scroll mode—SCROLL” on

page 26.

Some characters or symbols will not be shown (and

appear as blanks) on the display.

(Ex. “ABCå!d#” ]“ABCA D ”)

• When you press DISP (display) while playing a

conventional CD, “NO NAME” appears for the disc

title/performer and the track title.

Prohibiting CD ejection

You can prohibit CD ejection and can lock a CD

in the loading slot.

While pressing CD TUNER, press and

hold 0 for more than 2 seconds.

“EJECT” flashes on the display for about 5

seconds, and the CD is locked and cannot

be ejected.

To cancel the prohibition and unlock the CD,

press 0 again for more than 2 seconds, while

pressing CD TUNER.

“EJECT” appears on the display, and the CD

ejects from the loading slot.

DISP

Disc Title / Performer

Track Title

Current track no. and

Elapsed playing time

Clock

TUNER

EN12-20.KD-S845[U]f 1/28/03, 11:58 AM14

ENGLISH

MP3 INTRODUCTION

How are MP3 files recorded

and played back?

MP3 “files (tracks)” can be recorded in

“directories (folders)”—in PC terminology.

During recording, the files and directories can be

arranged in a way similar to arranging files and

directories/folders of computer data.

“Root” is similar to the root of a tree. Every file

and directory can be linked to and be accessed

from the root.

Playback order, file search order, and directory

search order of the MP3 files recorded on a disc

are determined by the writing (or encoding)

application; therefore, playback order may be

different from the one you have intended while

recording the directories and the files.

The illustration on the next page shows an

example of how MP3 files are recorded on a

CD-R or CD-RW, how they are played back, and

how they are searched on this unit.

Notes:

• The unit can read a CD-ROM containing MP3

files. However, if non-MP3 files are recorded

together with MP3 files, this unit will take a longer

time to scan the disc. It may also cause the unit to

malfunction.

• The unit cannot read or play an MP3 file without

the extension code—mp3.

• The unit is not compatible with Playlist*.

A playlist is a simple text file, used on a PC, which enables

users to make their own playback order without physically

rearranging the files.

What is MP3?

MP3 is an abbreviation of Motion Picture Experts

Group (or MPEG) Audio Layer 3*. MP3 is simply a

file format with a data compression ratio of 1:10

(128 Kbps**). That means, by using MP3 format,

one CD-R or CD-RW can contain 10 times as

much data volume as a regular CD can.

This player is not compatible with the data encoded with

Layer 1 and 2 formats.

** Bit rate is the average number of bits that one second of

audio data will consume. The unit used is Kbps (1024

bits/second). To get a better audio quality, choose a higher

bit rate. The most popular bit rate for encoding is 128

Kbps.

This unit is incorporated with an MP3 decoder.

You can play back MP3 files (tracks) recorded on

CD-Rs, CD-RWs, and CD-ROMs.

Compatible with ID3v1

Extra information data such as album title, performer

name, song title, recording year, music genre and a

brief comment can be stored within an MP3 file.

This unit can show ID3v1 tags (album name,

performer name and song title) on the display.

• Some characters cannot be shown correctly.

• This unit is not compatible with ID3v2.

Other Main Features in this unit:

• Maximum number of directories/files: 289

(Total)

• Available characters: A–Z, 0–9, _ (underscore)

• Maximum number of characters for file name

(ISO 9660 Level 1): 12 (inclusive of

separation mark—“.” and

extension code—“mp3”)

(ISO 9660 Level 2): 31 (inclusive of

separation mark—“.” and

extension code—“mp3”)

(Joliet): 64 (inclusive of

separation mark—“.” and

extension code—“mp3”)

• Maximum number of characters for directory

name: 64

Precautions when recording MP3 files

on a CD-R or CD-RW

This unit can only read MP3 files that are recorded

in the format that is compliant with ISO 9660 Level

1, Level 2 or Joliet.

EN12-20.KD-S845[U]f 1/28/03, 11:58 AM15

ENGLISH

MP3 directory/file configuration

1312

2322 24

1110 2120

1 2

5 6

3 4

ROOT

15 1614

06 07

05 09

Level 1

Level 2

Level 3

Level 4

Level 5

Level 6

Hierarchy

: Root

: Directories

: MP3 files

ROOT

Note:

There is no limit on the number of the hierarchy levels (nested

directories). However up to 8 hierarchy levels is recommended for

stable operation.

MP3 playback/search order (page 18)

• The numbers in circles below the MP3 files ( ) indicate the playback order and search order of the

MP3 files. Normally this unit plays back MP3 files in the recorded order.

• The numbers inside the directories indicate the playback order and search order of the directories

on an MP3 disc. Normally this unit plays back MP3 files in the directories in the recorded order.

EN12-20.KD-S845[U]f 1/28/03, 11:58 AM16

ENGLISH

MP3 OPERATIONS

Refer also to “CD OPERATIONS” on pages 12 to 14.

Playing an MP3 disc

Insert an MP3 disc into the loading slot.

The unit turns on,

draws the MP3 disc

and starts playback

automatically.

Note on One-Touch Operation:

When a CD is already in the loading slot,

pressing the CD TUNER button turns on the unit

and starts playback automatically.

The CD–in indicator lights up.

Playback starts automatically from the first file of

the first directory once disc check is completed.

Notes:

• All the files on the disc will be played repeatedly

until you stop playback—All File Repeat Play.

• MP3 discs require a longer readout time.

(It differs due to the complexity of the directory/file

configuration.)

To change the display information

While playing back an MP3 file, you

can change the file information

shown on the display.

Each time you press DISP (display),

the display changes to show the

following:

• When “TAG DISP” is set to “TAG ON”

(initial setting: see page 26)

* If an MP3 file does not have ID3 tags,

directory name and file name appear.

• When “TAG DISP” is set to “TAG OFF”

Directory name

File name

Elapsed playing time

(with track No.)

Clock

Note:

The display shows up to 8 characters at one time

and scrolls if there are more than 8 characters.

See also “Selecting the scroll mode – SCROLL” on

page 26.

SCM indicator flashes.

The CD–in indicator lights up.

The CD–in indicator flashes.

SCM indicator flashes.

Ex.: When the disc contains 10 directories and

127 MP3 files.

Album name/performer (directory name*)

Track title (file name*)

Elapsed playing time (with track No.)

Clock

TUNER

SCM

RND

RPT

DISP

LOUD

DISP

EN12-20.KD-S845[U]f 1/28/03, 11:58 AM17

ENGLISH

To go to a particular directory directly

IMPORTANT:

To directly select the directories using the

number button(s), it is required that directories

are assigned 2 digit numbers at the beginning of

their directory names. (This can only be done

during the recording of CD-Rs or CD-RWs.)

Ex.: If directory name is “01 ABC”

= press 1 to go to directory 01 ABC

If directory name is “1 ABC,”

pressing 1 does not work

If directory name is “12 ABC”

= press and hold 6 (12) to go to

directory 12 ABC

Press the number button corresponding to the

directory number to start playing the first file in

the selected directory.

• To select a directory number from 01 – 06:

Press 1 (7) – 6 (12) briefly.

• To select a directory number from 07 – 12:

Press and hold 1 (7) – 6 (12) for more than 1

second.

Notes:

• If CD source indicator flashes on the display after

you have selected a directory, it means that the

directory does not contain any MP3 files.

• You cannot directly select a directory with a number

greater than 12.

To select a particular file in a directory, press

or 4 after selecting the directory.

8 9 10 11 127

To stop play and eject the disc

Press 0.

Playback stops and the disc automatically ejects

from the loading slot.

If you change the source to FM or AM, the

playback also stops (without ejecting the disc this

time).

Locating a file or particular

portion on an MP3 disc

To fast-forward or reverse the file

Press and hold ¢

while playing an MP3 disc,

to fast-forward the file.

Press and hold 4

while

playing an MP3 disc, to reverse

the file.

To skip to the next file or the previous files

Press ¢ briefly while

playing, to skip ahead to the

beginning of the next file.

Each time you press the button

consecutively, the beginning of

the next file is located and

played back. (See “MP3

playback/search order”

on page 16.)

Press 4

briefly, while

playing, to skip back to the

beginning of the current file.

Each time you press the button

consecutively, the beginning of

the previous files is located and

played back. (See “MP3

playback/search order”

on page 16.)

EN12-20.KD-S845[U]f 1/28/03, 11:58 AM18

ENGLISH

Selecting MP3 playback modes

To play back files at random (Random Play)

You can playback all tracks on MP3 disc

at random.

Each time you press MO RND

(monaural/random) while playing

an MP3 disc, the random play

mode changes as follows.

To skip to the next directory

Press 5 (up) briefly while playing an MP3 disc.

Each time you press the button consecutively, the

next directory is located (and the first file in the

directory starts playing, if recorded).

5BAND

Ex.1: While playing an MP3 file in Directory 01

(see the illustration on page 16)

04 05 06 07

Ex.2: While playing an MP3 file in Directory 04

(see the illustration on page 16)

Note:

If the directory does not contain any MP3 files, it is

skipped.

To skip to the previous directory

Press ∞ (down) briefly while playing an MP3 disc.

Each time you press the button consecutively, the

previous directory is located (and the first file in

the directory starts playing, if recorded).

∞

Ex.1: While playing an MP3 file in Directory 03

(see the illustration on page 16)

03 02 01

ROOT

05 04 03 02

• If you reach the root, playback will not begin.

Note:

If the directory does not contain any MP3 files,

it is skipped.

Ex.2: While playing an MP3 file in Directory 05

(see the illustration on page 16)

01 02 03 04

RND1 Lights All files of the current

directory.

RND2 Flashes All files on the disc.

Mode

Plays at random

RND

Indicator

“RND” indicator

Ex.: When you select “RND1.”

RND

RND1 RND2

Canceled

EN12-20.KD-S845[U]f 1/28/03, 11:58 AM19

ENGLISH

RPT 1 Lights The current file (or

specified file).

RPT 2 Flashes All files of the current

directory (or specified

directory).

Mode

Plays repeatedly

RPT

Indicator

To play back files repeatedly (Repeat Play)

You can play back the current file or all the files

in the current directory repeatedly.

Each time you press SCAN RPT

(scan/repeat) while playing an

MP3 disc, the repeat play mode

changes as follows:

“RPT” indicator

Ex.: When you select “RPT 1.”

RPT1 RPT2

Canceled

RPT

SCAN

EN12-20.KD-S845[U]f 1/28/03, 11:58 AM20

Page is loading ...

JVC Car Stereo System GET0163-001A User manual

Brand: JVC

Model: Car Stereo System GET0163-001A

Category: Car media receivers

Type: User manual

This manual is also suitable for

Download PDF

report

in other languages

italiano: JVC Car Stereo System GET0163-001A Manuale utente
français: JVC Car Stereo System GET0163-001A Manuel utilisateur

JVC Car Stereo System GET0163-001A User manual

This manual is also suitable for

JVC Car Stereo System GET0163-001A User manual

in other languages

Related papers

Other documents