Ignis 345 346 10 Program Chart

345 346 10
Ignis
Brand
Ignis
Model
345 346 10
Type
Program Chart

This manual is also suitable for

HOO 502 - 512 - 546
5019 100 75008/A LI01TA
INSTALLATIONSANGABEN
Mindestabstand zur Kochfläche: 60 cm (Elektroplatten), 70 cm (Gas-, Öl-, Kohlekochplatten)
INSTALLATION SHEET
Minimum height above cooker: 60 cm (electric cookers), 70 cm (gas, gas oil or coal cookers)
FICHE D'INSTALLATION
Distance minimale par rapport à la cuisinière : 60 cm (cuisinière électrique), 70 cm
(cuisinière à gaz, à mazout ou à charbon)
INSTALLATIESCHEMA
Min. afstand van het kooktoestel: 60 cm (elektrische kooktoestellen) 70 cm
(kooktoestellen op gas, olie of kolen)
FICHA DE INSTALACIÓN
Distancia mínima desde los quemadores: 60 cm (quemadores eléctricos), 70 cm
(quemadores a gas, gasóleo o carbón)
FICHA DE INSTALAÇÃO
Distância mínima do fogão: 60 cm. (fogões eléctricos), 70 cm. (fogões a gás, óleo ou carbono)
SCHEDA INSTALLAZIONE
Distanza minima dai fuochi: 60 cm (fuochi elettrici), 70 cm (fuochi a gas, gasolio o carbone)
ùüùü+ùùùþ
ü$12.)12.1.)2"0120" FP02!"0120" FP0120".0! #
02!0. #0! #.
INSTALLATIONSBLAD
Minsta avstånd från olika typer av spisar: 60 cm (elektrisk spis), 70 cm (gasspis,
gasolspis och koleldad spis)
INSTALLATIONSKORT
Minimumafstand fra kogezonerne: 60 cm (elplader), 70 cm (gas-, gasolie- eller kulkogezoner)
MONTERINGSANVISNING
Avstand til komfyrtopp: minst 60 cm (elektrisk), minst 70 cm (gass-, olje- eller vedkomfyr)
ASENNUSOHJEET
Vähimmäisetäisyys liesistä: 60 cm (sähkölevyt), 70 cm (kaasu-, öljy- tai hiililiedet)
D
GB
F
NL
E
P
I
*5
S
DK
N
FIN
HOO 502 - 512 - 546
5019 100 75008/A LI01TA
AA
A
FF
F
1
3
Ø
135mm
5
4
6
10x10mm
2
10
12
12
13
13
14
8
15
20mm
16mm
CLOSED
OPEN
CLOSED
OPEN
9
11
11 11
OK!OK!
OK!
7
HOO 502 - 512 - 546
5019 100 75008/A LI01TA
1.
Control panel
2.
Grease filters (inside the extraction grille)
3.
Lighting unit
4.
Pull-out steam deflector
REMOVING AND RENEWING OR
CLEANING GREASE FILTER:
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector.
3.
Remove the extraction grille.
4.
Remove the grease filter fixing device.
5.
Remove the dirty grease filter.
6.
After renewing the grease filter (depending
on model) remount in reverse order, making
sure the entire extraction surface is covered.
MOUNTING OR RENEWING THE
CARBON FILTER:
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector.
3.
Remove the extraction grilles.
4.
If a carbon filter is already mounted and
needs renewing, press the release buttons
(
b
) and pull the filter out downwards.
5.
If the filters are not mounted.
a.
Fit the carbon filter onto the upper hooks.
b.
lock using the lower hooks.
6.
Remount the extractor grille.
REPLACING BULBS:
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector.
3.
Open the rear extraction grille.
4.
Remove the burnt-out bulb.
Use 40W max (E14) bulbs only.
5.
Remount the extractor grille.
CONTROL PANEL
A.
Light switch.
B.
Speed selector.
2
3
4
1
CLOSED
OPEN
CLOSED
OPEN
O123
O
AB
aa
bb
medium amount of
steam and fumes
large amount of steam
and fumes
small
amount of
s
team and
fumes
F NL E PGBD S DK N FINGRI
PRODUCT DESCRIPTION SHEET
  • Page 1 1
  • Page 2 2
  • Page 3 3

Ignis 345 346 10 Program Chart

345 346 10
Ignis
Brand
Ignis
Model
345 346 10
Type
Program Chart
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents