Husky Liners 52351 Owner's manual

Hello! I am an AI chatbot trained to assist you with the Husky Liners 52351 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

5235 Installation Instruction WL.doc

View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime-warranty 08_24_2017

X-ACT CONTOUR

FLOOR LINERS

CARE AND USE INSTRUCTIONS – PN:52351

Thank you for selecting an X-act Contour™ Floor Liners from Husky Liners Inc. Your new

liners are custom molded to fit your specific vehicle’s floor board. The liners are made to take the

place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats

before installing your new floor liners. However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and

durable. The easiest way to clean your liner is with a damp cloth or sponge and soap and water.

Windex®, 409® and ArmorAll® type cleaners work as well.

TO EASE INSTALLATION OF YOUR NEW FRONT LINERS, MOVE BOTH FRONT SEATS TO THE

MOST REARWARD POSITION. WITH THIS DONE, INSTALL LINERS AS SHOWN IN THE IMAGES

ABOVE.

LEFT OR DRIVER’S SIDE

RIGHT OR PASSENGER’S SIDE