KitchenAid KHRT 7710/I Program Chart

Brand: KitchenAid

Model: KHRT 7710/I

Type: Program Chart

KitchenAid KHRT 7710/I is a multi-functional hob with a variety of features to make cooking easier, safer and more efficient. The hob has five cooking zones of varying sizes and power levels, including a 145mm diameter halogen cook zone, a 180mm diameter radiant surface cook zone, an oval dual zone radiant surface cook zone, and a 230mm diameter radiant surface cook zone.

The hob also has a range of special options, including a dual zone option, a warming option, a heat maintenance option, a 30 Seconds Max Option, a fast boil option, and a timer switch option. These options give you greater control over the cooking process, allowing you to cook food more precisely and efficiently.

KHRT 7710/I

Product sheet

1. 145mm diameter halogen cook zone

2. 180mm diameter radiant surface

cook zone

3. Oval dual zone radiant

surface cook zone

4. 230mm diameter radiant surface

cook zone

5. Display and controls

Important: to avoid causing permanent damage to the glass ceramic

hob, do not use

- pans with bottoms that are not perfectly flat

- metal pans with enamel bottoms

Product description

FUNCTIONS

Max

TIMER

Type: PLEFK 230V~/400V~ 3N 50Hz 6.8 kW

Hob sizes

A On/off button

B Pause

C Select cooking zone and

regulation of levels

D Special options strip

E Timer strip

F Child safety lock

SPECIAL OPTIONS STRIP

1. Dual zone option

The Oval cook zone consists of two cooking zones,

and can be used as a large oval zone, or a smaller

circular zone.

2. Warming option

Keeps a steady low temperature on the zones. In

the right kind of containers, this option is suitable

for: leavening dough, melting butter, heating a

baby’s bottle, preparing baby food, yoghurt and

melting chocolate.

3. Heat maintenance option

Sets a low temperature to keep food hot.

4. 30 Seconds Max Option

The option sets one of the zones at maximum

power for a limited time of 30, 60, 90 seconds

during normal cooking.

5. Fast boil option

Sets a higher level of power in order to boil water

quickly.

6. Timer switch option

The timer switch option can be set both as a timer

and to turn a zone on and off.

C D C ABF

FUNCTIONS

Max

TIMER

Max

FUNCTIONS

65432

To turn on the hob, press down the button for at

least 2 seconds. A light will come on above the

button.

An audible signal can be heard when you turn the hob

on. The display for each zone shows a 0. If the hob was

used recently and has not yet cooled down sufficiently,

the displays on the zones that are still hot will show an

Select the zone you wish to use within 25 seconds by

pressing the + or – buttons to turn it on. The display

on the zone selected lights up and the LED indicators

on the special options available for that zone, will start

flashing.

A zone will stay selected for 6 seconds during which

time the 'special options' LED indicators that refer to

that zone will keep flashing. After 6 seconds, if not

selected, the zone must be reselected by pressing the

+ or - buttons any any special options required. If no

zone is selected within 25 seconds of the hob being

switched on the hob turns off automatically for safety

reasons.

IMPORTANT: the hob safety system includes an

automatic turn off function after 1 hour of running at

maximum power, after 6 hours of running at minimum

power or when the warming option is on.

For normal use of the hob, after selecting the zone,

you can regulate the power level by pressing the + or

– buttons, selecting a level from 1 to 9. If you select

the zone using the – button the zone will

automaticallly switch on at the highest power level (9).

Pressing simultaneously on both + and -, will turn the

zone off.

After turning off a zone, the display for the zone will

indicates that the zone is hot and is a significant burn

risk.

This symbol stays on until the temperature of the

zone falls to an acceptably safe level.

If you turn off the hob whilst a cook zone is still hot,

General use

How to use your hob

the symbol H will be displayed until the cook zone is

sufficiently cool.

If you wish to use the special options, shown by the

LED indicators on a working zone, press the

corresponding button on the special options strip. If

you try to activate a special option that is not available

on that zone, a low buzzer will sound, either select

another zone with the special option required, or

select another special option. The fast boil, warming,

heat maintenance, 30 second max and maintaining

boiling point options (where included) can be turned

on individually on each zone. The special warming,

heat maintenance and maintaining boiling point

options (where included), are shown on the cooktop

displays where they are active, with a clockwise

movement.

The fast boil option is indicated on the display by

three horizontal segments that progressively light up

vertically.

If you want to change a special option, just select the

zone you want and press the button for the desired

special function.

General use

1. Pause option

The pause option lets you momentarily turn off the

cooking session underway, preventing food from

burning or liquids spilling out of pots as a result of

prolonged, undesired boiling. When you activate

the pause option, all the zones that are operating

are reduced to a maintenance temperature that

corresponds with the heat maintenance special

option.

Turning the pause option on and off

The pause option, can be turned on by pressing

. The option is active when the LED on the

button is illuminated. The displays on all the zones

show two vertical flashing strips. If the warming

option is set on one of the zones, as this option

offers a more gentle cooking temperature than the

heat maintenance, the maintenance temperature of

the zone will be that of the warming option.

Press the pause button again to remove the pause

option. The situation prior to activating the pause

button is once again put in place when you turn off

the pause option. Any cooking times set prior to

activating the pause option will continue counting

the time including all the time the pause option was

on. The pause option turns off automatically after

2 hours. NEVER LEAVE THE HOB, WHILST

COOKING UNATTENDED FOR WHATEVER

REASON, EVEN IF THE PAUSE OPTION IS ON.

2. 30 Seconds max option

The 30 second max. option allows you to cook at a

higher temperature for a limited period of time.

You cannot activate the 30 second max. option

when a zone is turned off, only after having

selected one of the levels from 1 to 9.

Turning the 30 second max. option on and off

Press the button on the special options strip

to turn the 30 second max. option on after turning

on the cook zone by pressing + or - button. If you

press the 30 second max button once, you will set

the option to 30 seconds. An illuminated horizontal

segment appears on the zone display selected. By

pressing the button again, you will set the time to

60 and then 90 seconds and 2 and 3 horizontal

segments will appear respectively on the display.

Once you have activated this option and set the

time, the display will show how much time is left

by turning off a segment every 30 seconds. Press

the + and – buttons simultaneously to turn the 30

second max. option off. If you do not turn the

option off before the allotted time is up, after 30 –

60 – 90 seconds, the cooking temperature will

automatically return to the previous level.

3. Child safety option

The child safety option completely deactivates the

cooktop to prevent children from using it.

Turning the child safety option on and off

The child safety option can be turned on by

pressing . The control is turned off except for

the child safety buttons and the on/off button.

The control is blocked at the point it was at before

the child safety option was turned on. Prior to the

child safety option being turned on, the levels or

special options set on the zones are frozen and

they cannot be changed.

If none of the zones are on,when the child safety

option is selected the appliance will be switched

off. When the hob is switched on the child safety

option is still activated. Hold down the button

for 3 seconds to deactivate it. If there was is a

power cut and the hob loses power, if the child

safety lock was deactivated before the powercut, it

will remain deactivated when power is restored.

Max

Using the special options and advanced use of the hob

4. Dual cook zone option

Where the dual cook zone option is included, both

cook zones are activated allowing you to cook with

larger pans or fish kettles.

Turning the dual cook zone option on and off

The dual cook zone option can be turned on by

pressing . It only refers to specific zones. The

dual cook zone option can be selected with any

level setting and with any of the special options

running. The dual cook zone option can be turned

off by pressing the + and – buttons simultaneously.

5. Fast boil option

The fast boil option is set for a limited time period,

at a temperature greater than level 9. The option

allows you to reduce the boiling time of water.

Turning the fast boil option on and off

The option can be set on any of the zones in use

by pressing the button.

Press the – button on the selected zone to turn the

option off, reducing the level of power, or by

pressing + and – simultaneously.

6. Timer switch option

The timer switch option can either be used as a

timer, without specific reference to any one zone,

or it can be used on a selected cook zone to

programme.

Turning the timer switch option on and off

When you use the timer switch option as a timer,

press on the special options strip to turn it on.

You can select the time required by pressing the +

and – buttons on the timer strip. You can select up

to 99 minutes. A long audible signal is given off

when the time expires. Press to turn the

signal off.

If you wish to use the timer to turn a cook zone on

and off, the ring must be set at a level of power or

on one of the following special options: fast boil,

warming or heat maintenance.

The display on the timer strip will start flashing

when you press the timer switch. When you select

a cook zone by pressing + or -, one of the LED

indicators, located on the four extremes of the

timer display, will come on to indicate the cook

zone selected. Select the time required by pressing

the + and – buttons on the timer strip. The display

stops flashing after a few seconds and the cook

zone programming is complete.

At this point you can programme another cook

zone. All cook zones can be programmed

seperately using the timer.

The cook zones set on the timer are identified by

the LED indicators above the timer symbol. The

LED indicators at the top of the display on the

timer strip show which cook zone the time shown

on the display refers to.

Normally it shows the time relating to the shortest

set time. By selecting a ring, the display on the

timer strip shows the time relating to that specific

cook zone.

Press the + and – buttons simultaneously to

interrupt the timing on a cook zone.

Using the special options and advanced use of the hob

5019 719 01147

Printed in Italy 11/07

Whirlpool Europe S.r.l.

Viale G. Borghi, 27 - 21025 Comerio (VA)

Phone 0332.759111 - Fax 0332.759268

www.whirlpool.eu

KitchenAid KHRT 7710/I Program Chart

KitchenAid KHRT 7710/I Program Chart

KitchenAid KHRT 7710/I Program Chart

Related papers

Other documents