KitchenAid KHIT 6010/I Program Chart

Brand: KitchenAid

Model: KHIT 6010/I

Type: Program Chart

This manual is also suitable for

KHIT 7710/I

KHIT 7710/I

Product sheet

1. Induction cook zone Ø 145 mm

2. Induction cook zone Ø 210 mm

3. Induction cook zone Ø 280 mm

4. Induction cook zone Ø 145 mm

5. Display and controls

Important: to avoid causing permanent damage to the glass ceramic

hob, do not use

- pans with bottoms that are not perfectly flat

- metal pans with enamel bottoms

Product description

Type: PLEIK 230V~/400V~ 3N 50Hz 7,4 kW

Type: PLEIK 230V~ 50Hz 7,4 kW (UK only)

Hob sizes

A On/off button

B Pause

C Cook zone controls and

option LEDs

D Special options strip

E Timer strip

F Child safety

SPECIAL OPTIONS STRIP

1. Warming option

Keeps a steady low temperature on the cook

zones. In the right kind of containers, this option is

suitable for: leavening dough, melting butter,

heating a baby’s bottle, preparing baby food,

yoghurt and melting chocolate.

2. Heat maintenance option

Sets a low temperature to keep food hot.

3. Simmering option

Maintains a temperature on the cook zone that is

sufficiently high to keep water simmering.

4. 30 Seconds Max Option

The option sets the cook zone at maximum power

for a limited time of 30, 60 or 90 seconds during

normal cooking.

5. Fast boil option

Sets a higher level of power in order to boil water

quickly.

6. Timer switch option

The timer switch option can be used both as a

timer and to programme one or more cook zones

to turn off when finished.

How to use your hob

C D C ABF

65432

To turn on the hob, press down the button for at

least 2 seconds. An LED will illuminate above the

button.

An audible signal can be heard when you turn the hob on.

The display for each cook zone shows a 0. If the hob was

used recently and has not yet cooled down sufficiently,

the displays on the cook zones that are still hot will show

an H.

Select the cook zone you wish to use within 25

seconds by pressing the zones + or – buttons to turn

it on. The display on the selected cook zone lights up

and the special option LEDs for that cook zone are

illuminated and start to flash.

A cook zone will stay selected for 6 seconds during

which time the special option LEDs will keep flashing.

After that time you will have to re-select the cook

zone again by pressing + or – buttons then selecting

the special option.

If you do not select one of the cook zones within 25

seconds the hob will automatically switch off for safety

reasons.

IMPORTANT: the hob safety system includes an

automatic turn off function. The hob will turn off

automatically if it has been running continuously for 1

hour at maximum power, or running continuously for

6 hours at minimum power, or 6 hours when the

warming function has been selected.

For normal use of the hob, after selecting the cooking

zone, you can alter the power level by pressing the +

or – buttons, selecting a power level 1 to 9. If a

cooking zone is selected by pressing the – button,

then the highest power level (9) is automatically set.

Pressing both the + and – buttons together will

switch off the cook zone.

After turning off a cook zone, the display for the cook

zone will indicate that the zone is still hot with the

letter 'H'.

General use

This symbol stays on until the temperature of the hot

cook zone falls to a safe level.

If you turn the hob off, whilst the cooking zone is still

hot, the 'H' symbol will still be displayed until the zone

has cooled down.

If you wish to use the special options, shown by that

cook zone's LEDs press the corresponding button on

the special options strip. If you select an option that is

not available on that cook zone a short low noise will

be heard.The fast boil, warming, heat maintainance

and simmering options ( where included), are shown

on the cook zone's displays flashing in a clockwise

rotation.

The fast boil option is indicated on the display by

three horizontal segments that progressively light up

vertically.

If you want to change a special option, just select the

cook zone you want and press the button for the

desired special function.

General use

1. Pause option

The pause option lets you momentarily turn off the

cooking session underway, preventing food from

burning or liquids spilling out of pans as a result of

prolonged, undesired boiling. When you activate

the pause option, all the cook zones that are

operating are reduced to a maintenance

temperature that corresponds with the heat

maintenance special option.

Turning the pause option on and off

The pause option, can be turned on by pressing

. The option is active when the LED is

illuminated on the button. The displays on all the

cook zones show two vertical flashing strips. If the

warming option is already selected on a cooking

zone and the pause function is operated, the

power level of that zone will be set at the warming

option, as this is a more gentle heat than heat

maintainence.

Press the pause button again to remove the pause

option. The settings prior to the activation of the

pause function are restored, as if the pause button

had not been pressed. Any cooking times set prior

to activating the pause option will continue

counting the time including all the time the pause

option was on. The pause option turns off

automatically after 2 hours. NEVER LEAVE THE

COOKTOP UNATTENDED FOR WHATEVER

REASON, EVEN IF THE PAUSE OPTION IS ON.

2. 30 Seconds max option

The 30 second max. option allows you to cook at a

higher temperature for a limited period of time.

You cannot activate the 30 second max. option

when a cook zone is turned off, only after having

selected one of the levels from 1 to 9.

Turning the 30 second max. option on and off

Select a cooking zone by pressing the + or -

buttons for that cook zone. Press the button

on the special options strip. If you press the 30

second max button once you will set the option to

30 seconds. By pressing the button again you will

set the time to 60 seconds, and pressed further to

90 seconds. An illiminated horizontal segment

appears in the cook zone display for the 30

seconds, two segments will appear for 60 seconds

and three segments will appear for 90 seconds.

Once the option has been activated the a segment

will disappear every 30 seconds to show how

much time is left. To turn off this function press the

+ and – buttons together. Once the option has

either run out of time, or has been turned off the

cook zone will return to the previously selected

power level.

3. Child safety option

The child safety option completely deactivates the

hob to prevent children from using it.

Turning the child safety option on and off

The child safety option can be turned on by

pressing . The control is turned off except for

the child safety buttons and the on/off button.

The control is blocked at the point it was at before

the child safety option was turned on. Prior to the

child safety option being turned on, the levels or

special options set on the cook zones are frozen

and they cannot be changed.

If the child safety option is selected and all the cook

zones are not in use, the hob will be deactivated.

When the hob is switched back on the child safety

option will still be active. Hold down the

button for 3 seconds to turn it off. If there is a

Using the special option and advanced use of the hob

power cut and the hob loses power, the child

safety option will be deactivated when the power

returns.

4. Simmering option

The simmering option temperature is factory set at

a temperature to maintain a gentle boiling action in

water.

In order to minimise cooking times we recommend

that the fast boil option should be used, then

switch to the simmering option, when the water is

boiling.

Turning the simmer option on and off

The simmering option can be selected by pressing

. The cook zone switched on, with or without

another special option selected. Press the + and –

buttons simultaneously to turn off the option.

5. Fast boil option

The fast boil option sets the power level at a

temperature greater than 9 for a limited time. This

option allows you to minimise the time taken to

boil water.

Turning the fast boil option on and off

The option can be set on each cook zone that is

working either at a level or on a special option, by

pressing the button. The fast boil option can

only be used simultaneously on 2 cook zones, one

on the right and the other on the left.

IMPORTANT : depending on the levels set,

when this option is used together with

another cook zone, the hob may become

noisy.

IMPORTANT : when you select the fast boil option

on the large cook zone (210mm), the power in the

small front left cook zone will be automatically

reduced, allowing you to continue cooking. If

possible avoid using the front left cooking zone if

you wish to use the fast boil option on the large

cooking zone.

Press the – button on the selected cook zone to

turn the option off, reducing the level of power, or

by pressing + and – simultaneously.

6. Timer switch option

The timer switch option can either be used as a

timer, without specific reference to any one cook

zone, or it can be used on one of the cook zones to

programme it.

Turning the timer on and off

When the timer is used as a timer independantly of

the cooking zones, press on the special

options strip. Select the time required by using the

timer strip + and – buttons. up to 99 minutes can

be selected. An audible signal is heard when the

time expires.

Press to turn off the audible signal.

If you wish to use the timer to programme a cook

zone, turn on a cooking zone, with or without a

special option. Press the timer button. The timer

display on the timer strip will start to flash. Select a

cook zone by pressing the cook zone + or –

buttons, an LED in the timer display will illuminate

to show which zone has been selected. Enter the

time required using the timer strip + and –

buttons. After a few seconds, the display will stop

flashing and the programming is complete. At this

point you can programme another cook zone. All

the cook zones can be programmed seperately on

the timer.

The cook zones set on the timer are identified by

the illuminated LED above the timer symbol. The

illuminated LEDs at the top of the timer strip

display show which cook zone the time shown on

the display refers to.

Normally the time shown is the shortest

programmed time, by selecting a cook zone, the

display on the timer strip will show the time

relating to that cooking zone. Press the + and –

buttons simultaneously to interrupt the timing on a

cook zone.

Using the special option and advanced use of the hob

5019 719 01149

Printed in Italy 11/07

Whirlpool Europe S.r.l.

Viale G. Borghi, 27 - 21025 Comerio (VA)

Phone 0332.759111 - Fax 0332.759268

www.whirlpool.eu

KitchenAid KHIT 6010/I Program Chart

Brand: KitchenAid

Model: KHIT 6010/I

Type: Program Chart

This manual is also suitable for

KHIT 7710/I

Download PDF

report

KitchenAid KHIT 6010/I Program Chart

This manual is also suitable for

KitchenAid KHIT 6010/I Program Chart

Related papers

Other documents