Vixen X002278 Owner's manual

Vixen
Brand
Vixen
Model
X002278
Category
Telescopes
Type
Owner's manual
EN Operating Instructions
VC200L VMC200L
PREFACE Thank you very much for your purchase of a Vixen astronomical telescope
This manual applies to the VC200L and VMC200L telescopes. You may occasionally nd descriptions in the
text not relevant to your particular model. Read the instructions for your mount along with this manual if you
purchased the telescope as a complete package.
WARNING! Never look directly at the sun with the telescope or its nder or guide scope.
Permanent and irreversible eye damage may result.
CAUTION Do not leave the optical tube uncapped in the daytime. Sunlight passing through the
telescope or nder scope may cause re.
Do not use the product while moving or walking, injuries could result from a collision with
objects or from stumbling or falling.
Keep small caps, plastic bags, or plastic packing materials away from children. These may
cause a danger of swallowing or suocation.
Do not use the product in a wet environment and do not handle with wet hands.
HANDLING AND STORAGE
Do not leave the product inside a car in bright sunshine or in other hot places. Keep any
strong heat sources away from the product.
When cleaning, do not use solvents such as paint thinner or similar products.
Do not expose the product to rain, water, dirt or sand.
Avoid touching any lens or mirror surfaces directly with your hands. In case a lens or mirror
becomes dirty with ngerprints or general smears, gently wipe it using a commercially
available lens cleaner and a lens cleaning paper or cloth, or consult your local Vixen Optics
dealer.
Blow o dust on lenses using a commercially available blower brush. Do not use
compressed air.
For storage, keep the product in a dry place and do not expose to direct sunlight.
SETTING UP THE TELESCOPE - Refer to your mount instructions along with this manual.
ATTACHING THE TELESCOPE TUBE TO THE MOUNT
Loosen both the dovetail-plate lock screw and safety
screw until the tips of these screws no longer extended
into the inner part of the dovetail block. Slide the do-
vetail mounted scope into the dovetial mounting block
as shown in the gure. Tighten the dovetail lock screw
(centered on the notch) onto the dovetail tube plate
until snug.
Then tighten the small chrome safety screw onto the
dovetail mounting block until snug.
(SX mount and VMC200L optical tube shown here.)
Focus Tension Adjustment
Rack and Pinion Focuser
Focus Knob
Lock Screw
Safety Screw
Dovetail
Optical Tube
Carry Handle
Finder Scope Bracket Receiver
Piggyback Camera Mount
Finder Scope
Adjustment
Knob
Lock Screws
ATTACHING THE FINDER SCOPE
Loosen the nder bracket lock screw on the telescope´s nder bracket shoe. Attach the nder scope as shown
in the gure and tighten the nder bracket lock screw securely.
ACCESSORY CHART
You may need an eyepiece as sold seperately. The telescope does not come with the eyepiece as standard
accessory unless you purchased a package.
VISUAL CONFIGURATION
Magnication
of the Telescope
When using an
eyepiece with
short focal length
(small number in
milimeters), the
image will be dim
and the range of
sharp focus will be
small. The image
will be harder to
see so begin with
an eyepiece with
long focal length.
Dividing the focal
length of the
telescope by the
focal length of the
eyepiece gives the
magnication.
Example: Calculating the eyepiece magnication of a telescope with 1035mm focal length.
Eyepiece Focal length of telescope Focal length of eyepiece Magnication
PL 20mm 1800mm 20mm 90x
PL 5mm 1800mm 5mm 360x
2“ Diagonal
2956 Extension Tube
Flip Mirror Diagonal
2“ Back
Focuser Tension
Adjustment
PHOTOGRAPHIC CONFIGURATION
Prime focus Photography
Eye piece Projection Photography
Photography with Digital Camera
Photography with CMOScope or CCD Video Camera
Some of the optional accessories shown in this chart will be needed if you take pictures with an SLR camera,
digital camera or CCD video camera.
Specications VC200L VMC200L
Item# 2632 2733
Optical Deign Modied Cassegrain (VISAC) Modied Cassegrain
Eective Aperture 200mm 200mm
Focal Length 1,800mm (f/9.0) 1,950mm (f/9.75)
Resolving Power .58arc.; 13.3 .58 arc sec; 13.3
Light Gathering Power 816x 816x
Tube Diameter, Length & Weight 232mmx620mm; 6kg 232mmx535mm; 5.9kg
Finderscope 7x50mm /eld 6.8) 7x50mm (eld 6.8)
Threads 60mm, 42mm threaded for T-ring/ 50.8mm,
31.7mm push t
60mm, 42mm threaded for
T-ring/50.8mm, 31.7mm push t
Magnication LV20mm(90x), LV9mm(200x) LV20mm(90x), LV9mm(200x)
Accessories Flip Mirror, 7x50 Finder Scope Flip Mirror, 7x50 Finder Scope
Photography Prime Focus and Eyepiece Projection Prime Focus and Eyepiece
Projection
Total Weight 22.0 kg 21.9 kg
RE-COLLIMATION - Please contact a Vixen Optics dealer in your area for repair if your Vixen telescope is
out of collimation or download specic instructions from www.vixenoptics.com
Collimated Properly Mis-collimated
In Focus Out of Focus In Focus Out of Focus
The specications are subject to change without notice.
VIXEN - European Distributor Bresser GmbH Gutenbergstrasse 2, D-46414 Rhede, Germany
Phone: +49 (0) 2872 – 80 740 E-Mail: info@bresser.de www.bresser.de
(Refracting Telescopes)
Flip Mirror
(Supplied)
A80SS
A80M
A102M
NA Refractors
ED Refractors
EDf Refractors
(Catadioptic Telescopes)
(Reecting Telescopes)
R200SS
VC200L
VMC200L
SX60 → 50.8AD
(Supplied)
Eyepiece Adapter
(42mm → 31.7mm),
included with Flip
Mirror or a visual
back of R200SS
DC Rings
60mm→ 42mm (Supplied)
SX60 → 50.8AD
(Supplied)
T-C Ring
C-Mount Tele-Extender 2.4x
Digital Camera Adapter
DG-LV DX
LV Eyepiece
(31.7mm)
LV Eyepiece
(31.7mm)
T-Ring
DG-DX
Ring
CCD Video
Camera Monitor
/TV
SLR
Camera
Digital
Camera /
Camcorder
SX Camera Adapter
(Same as a Camera Connecting
Tube D for Camera Adapter)
Prime Focus Photography
Afocal System
Photography
Eyepiece Projection
Photography
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Vixen X002278 Owner's manual

Vixen
Brand
Vixen
Model
X002278
Category
Telescopes
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents