Pima DPP310 Installation guide

DPP310
Pima
Brand
Pima
Model
DPP310
Type
Installation guide

Pima DPP310 is a pet-friendly passive infrared detector with a 15-meter range and multi-height optics for various mounting heights. It features digital pulse count, advanced signal processing, and temperature compensation for reliable detection. With its sealed optics and RFI immunity up to 2.7GHz, it's suitable for residential, commercial, and industrial environments. It has a slide-to-fit front cover, remote LED control, and selectable EOL resistors for easy installation and maintenance.

Pima DPP310 is a pet-friendly passive infrared detector with a 15-meter range and multi-height optics for various mounting heights. It features digital pulse count, advanced signal processing, and temperature compensation for reliable detection. With its sealed optics and RFI immunity up to 2.7GHz, it's suitable for residential, commercial, and industrial environments. It has a slide-to-fit front cover, remote LED control, and selectable EOL resistors for easy installation and maintenance.

For EOL Wiring
For Double Pole Wiring
Pulse Count
Seal all holes
Mounting
DPP310
Instruction Manual
without bracket
2
1
2
Pulse
Pulse
A-Zone T-Zone
EOL Zone
Do Not
Touch
Key Features
Location
Max
2.2m
2.0m
Location
Warning
0
2
4
6
8
10
2
4
6
8
10
12
15m
15m
0 2 4 6 8 10 12
12 14 16
0 2 4 6 8 10 12 14 16
Coverage Pattern (m)
Mounting
Height
1
• 35kg Pet Friendly
• 15 Metre Range
• Grade 2
• Multi Height Optics
• 2.0m - 2.2m Mounting Height
• Selectable EOL Resistors
• Slide to Fit Front Cover
• Remote LED Control
• Sealed Optics
• True Creep Zones
• Digital Pulse Count
• Temperature Compensation
• Advanced Signal Processing
• RFI Immunity up to 2.7GHz
• Optional Tamper Proof Bracket
Patent Pending
12 15m0 2 4 6 8 10
2.0m
LED
On
Rem\Off
LED = 0V
LED
LED = NC/
12V
Detector Setup
3
12V 0V LED
•ALARM TAMPER•
12V 0V LED
•ALARM TAMPER•
www.pima-alarms.com
Pet Friendly PIR Detector
†
†
†
†
Use No. 6 countersunk screws
Recommended
Note: For maximum detection range, especially
at high temperatures, mount at 2.0m.
Tamper Resistor
Alarm Resistor
O/C
1K0
2K2
4K7
5K6
O/C
1K0
2K2
4K7
5K6
6K8
Note the jumper settings for
Installation with FORCE.
WEEE Directive: 2012/19/EU Compliant: This
symbol indicates that according to local laws and
regulations, this product should not be disposed
of as municipal/household waste. Instead, it
should be disposed of at the appropriate
collection points designated for the recycling of
electrical and electronic equipment, or returned
to PIMA upon purchase of new replacement
products. This will help to conserve natural
resources and ensure that it is recycled in a
manner that protects human health and the
environment.
RoHS Directive: 2011/65/EU Compliant:
PIMA declares that this product complies with
and conforms to RoHS legislation that it does not
contain more than the agreed levels of: Lead
(Pb), Cadmium (Cd), Mercury (Hg), Hexavalent
chromium (Cr6+), Polybrominated biphenyls
(PBB), Polybrominated diphenyl ethers (PBDE)
Standards and Approvals
Specification
Warranty Regulatory
Description Passive Infrared Detector
Pyro Electric Sensor Dual Element
Max Pet Weight 35kg
Range 15m
Optics Multi Height Spherical
Detection Areas 68
Mounting Height 2.0m - 2.2m
Supply Voltage 9 - 15V
DC
(12V nominal)
Quiescent Current 10mA
Alarm (LED enabled) 15mA
Alarm (LED disabled) 7mA
LED Control = 0V LED Enabled
LED Control = 12V / NC LED Disabled
Pulse Count Digital
Start-up Time 60 seconds
Alarm Time > 2 seconds
Target Speed 0.3m/s - 3.0m/s
Dimensions (whd) mm 60 x 97 x 40
Housing Material 2.5mm ASA
Operating Temperature -20°C to +55°C
Storage Temperature -35°C to 60°C
Maximum Humidity 95% non-condensing
Product Weight 80g
Packed Weight 95g
Maintenance Annual Installer Check
Security
PD 6662:2017
EN 50131-2-2:2021 Grade 2, Class II
EMC / False Alarm Immunity
EMC Immunity: EN 50130-4:2011
Radiated Immunity: 80MHz to 2.7GHz
Electrostatic Discharge: +/- 8kV
Conducted Immunity: 0.15MHz to 100MHz
Fast Transient Immunity: 2kV
Conducted & Radiated Emissions: EN 55032:2015
Hereby, PIMA Ltd declares that the DPP310 conforms to:
European Union (EU) Electro-Magnetic Compatibility
(EMC) Directive 2014/30/EU and EN
50130-4:2011+A1:2014
EMC Environment: Residential / Commercial / Light
Industrial / Industrial
The PIMA DPP310 is guaranteed against defects in
material or faulty workmanship for a period of 10 years
from the date of purchase.
Disclaimer: PIMA will not accept any liability based on
a claim that the DPP310 failed to perform correctly as
it is a component part of an installation and not a
complete intruder alarm system.
INS002-PIMA-ENGLISH
© Copyright 2017-2022
EU & UK Registered Design
Ordering Information
CAT. P/N 5010155
Description DPP310 PET immune PIR Detector
FORCE Settings
Set the FORCE Alarm System as follows:
• Two EOL resistors
• Resistor values – 100 (=10K)
Designed and Manufactured
in the United Kingdom
PIMA Electronic Systems Ltd.
5, Hatzoref St., Holon 5885633, Israel
Tel: +972.3.6506411
Email: [email protected]
http://www.pima-alarms.com
4410565 Rev A (Dec 2022)
  • Page 1 1
  • Page 2 2

Pima DPP310 Installation guide

DPP310
Pima
Brand
Pima
Model
DPP310
Type
Installation guide

Pima DPP310 is a pet-friendly passive infrared detector with a 15-meter range and multi-height optics for various mounting heights. It features digital pulse count, advanced signal processing, and temperature compensation for reliable detection. With its sealed optics and RFI immunity up to 2.7GHz, it's suitable for residential, commercial, and industrial environments. It has a slide-to-fit front cover, remote LED control, and selectable EOL resistors for easy installation and maintenance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents