Panduit DIFBA2002S00S User manual

DIFBA2002S00S
Panduit
Brand
Panduit
Model
DIFBA2002S00S
Category
Rack accessories
Type
User manual

Panduit DIFBA2002S00S is a switch ducting system designed to enhance airflow management and cooling efficiency for Cisco Nexus 9396PX switches in Net-Access S-Type Server Cabinets. With its innovative design, it offers several key features and capabilities:

  • Improved Airflow: The switch ducting optimizes airflow by directing cool air from the front of the cabinet directly to the switch, ensuring efficient heat dissipation and preventing overheating.

  • Easy Installation: The ducting system is designed for simple and quick installation, requiring minimal tools and effort. It seamlessly integrates with the switch rails and includes necessary hardware for secure mounting.

Panduit DIFBA2002S00S is a switch ducting system designed to enhance airflow management and cooling efficiency for Cisco Nexus 9396PX switches in Net-Access S-Type Server Cabinets. With its innovative design, it offers several key features and capabilities:

  • Improved Airflow: The switch ducting optimizes airflow by directing cool air from the front of the cabinet directly to the switch, ensuring efficient heat dissipation and preventing overheating.

  • Easy Installation: The ducting system is designed for simple and quick installation, requiring minimal tools and effort. It seamlessly integrates with the switch rails and includes necessary hardware for secure mounting.

FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014
V00029ER
Page 1 of 4
DIFBA2002S00S
(installed in Net-Access
S-Type Server Cabinet)
Switch Inlet Duct
DIFBA2002S00S
Cisco Nexus 9396PX Switch
(reference)
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
V00029ER
Page 2 of 4
Intended
Mounting
Location
(2 rack spaces)
Prepare Switch for Ducting Installation
-Remove bottom screws from front of switch rails and discard.
FRONT OF
CABINET
Install Cage Nuts
-Insert [2] Bonding cage nuts per equipment rail in rack space immediately above switch rails, at front of cabinet
FRONT OF
CABINET
[2] Bonding Cage Nuts
(install in Rack Space
above switch rails)
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
V00029ER
Page 3 of 4
FRONT OF
CABINET
Install Switch Ducting
-Secure DIFBA2002S00S switch ducting to equipment rails with [4] screws
-Do not tighten [2] bottom screws --- Leave slightly extended for Front Perforated Plate installation (see page 4)
[2] Bottom Screws
Provided with kit (with matching cage nuts if needed)
(leave slightly extended)
[2] Bonding Screws
Adjust Switch Ducting
-Use [4] wing nuts and tooth washers to adjust position of switch duct seals
-Install foam seal (if necessary) to seal ducting to bottom of switch
[4] Wing Nuts and Tooth Washers
Install Foam Seal
(if necessary)
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
E-mail:
[email protected]
Fax:
(866)405-6654
www.panduit.com
INSTALLATION INSTRUCTIONS
V00029ER
Page 4 of 4
Routing of Switch Power Cable
-Route switch power cable through power grommet (located on either side of DIFBA2002S00S)
-Use utility knife to slit power grommet(s) along guide lines, as needed, to allow for power cord pass-through
Switch Power Cable
[2] Power Grommets
Slit Power Grommet(s) to allow
for power cord pass-through
(use utility knife)
Install Front Perforated Plate
-Slide slots at bottom of Front Perforated Plate over [2] bottom screws
-Secure top of Front Perforated Plate to switch ducting and equipment rails with [2] bonding screws, then tighten [2] bottom screws
[2] Bonding Screws.
[2] Bottom Screws
(tighten after plate installation)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Panduit DIFBA2002S00S User manual

DIFBA2002S00S
Panduit
Brand
Panduit
Model
DIFBA2002S00S
Category
Rack accessories
Type
User manual

Panduit DIFBA2002S00S is a switch ducting system designed to enhance airflow management and cooling efficiency for Cisco Nexus 9396PX switches in Net-Access S-Type Server Cabinets. With its innovative design, it offers several key features and capabilities:

  • Improved Airflow: The switch ducting optimizes airflow by directing cool air from the front of the cabinet directly to the switch, ensuring efficient heat dissipation and preventing overheating.

  • Easy Installation: The ducting system is designed for simple and quick installation, requiring minimal tools and effort. It seamlessly integrates with the switch rails and includes necessary hardware for secure mounting.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents