Seamless Integration To Any Standard 3.5”

Drive Bay

Provide 2 USB 3.0 Ports To Your Front Panel

Plug And Play – No Drivers Are Required

The Vantec 2-port USB 3.0 Front Panel device tap into the capability of your main board and extend it to a convenient spot with ease

of access. Couple it with the added power and speed; you can get so much more done in a ash leaving you with time to day dream.

The Plug and Play features and the simplistic design for the 3.5” drive bay just make the integration so seamlessly easy. The

integrated USB 3.0 header plug easily into your main board and sleek device slide into 3.5” drive bay for easy mounting. Start

enjoying the ease and power of USB 3.0 with this Vantec 2-port USB Front Panel device.

20-pin USB 3.0 Header

USB 3.0 Port

Plastic & Steel

135 x 101 x 25 mm

Microsoft Windows XP/Vista/7 (32/64 Bit)

Connect to Your 20-pin Onboard USB 3.0

Introduction:

Specifiactions:

System Requirement

Package Contents