FEATURES AND TECHNICAL SPECIFICATION
z Complies with USB 2.0 and USB 1.1 specifications
z Compatible with IEEE 802.3 (10Base-T) and 802.3u (100
z Single chip USB to 10/100 Mbps Fast Ethernet controller
Embedded 20KB SRAM for RX packet buffering and 20KB
z Supports both full-duplex and half-duplex operations
z Supports suspended mode and remote wake-up (link-up
z Powered by USB port. No external power adapter require
z Equipped with diagnostic LEDs
z Plug & Play installation
z PHY power down mode for power saving
z Compatible with Microsoft Windows 2000, XP, Vista, and
INTERFACE DATA TRAN
USB 2.0 High -Speed
Backward compatible with USB 1.1
Network interface via RJ45 female jack
Ethernet:10
FastEthernet
Embedded 20KB SRAM for RX packet buffering and
20KB SRAM for TX packet buffering
Suspend M
Hibernation
SYSTEMREQUIRMENTS
OPERATING
CPU: Pentium 233MHz above or MAC
Memory size: min. of 64MB RAM
0
o
C - 70
o
C;
58g
One available USB slot
Windows2000,XP,Vista™32/64‐bit;MacOSX10.x
TYPICAL SETUP DIAGRAM AND RELATED PRO
* Product features and specifications are subject to change
ase-TX), and T4 standards
B SRAM for TX packet buffering
r magic packet)
ac OS 10.1 & above
FER RATES LED INDICATORS
bps/20Mbps(Half/FullDuplex)
:100Mbps/200Mbps(Half/FullDuplex)
POWER
LINK
de
Mode
850mW
EMPERATURE AND WEIGHT DIMENSIONS AND
CERTIFICATIONS
0% humidit
72 x 26 x 52 mm
UCTS
without notice.