LN-013
6/24
This very small-dimensioned network adapter is connected via the USB port of the computer. Thanks to the USB’s
hot-plug function you can plug in the adapter and log into the network with the computer on. The adapter is 10/100
Mbps compatible and can operate in half duplex as well as full duplex mode.
USB to Fast Ethernet Adapter
Driver
User manual
USB cable
USB to fast Ethernet adapter
8716502002009
7,4 Kg.
63 (W) x 42 (D) x 54 cm (H)
290 gr.
150(W) x 225(H) x 35 mm (D)
1,75Kg.
392 (W) x 300 (D) x 249 mm (H)
Pentium 166 MMX processor or better
16Mb RAM
USB Port
Windows 98/2000/ME/XP
USB specification 1.0 & 1.1
IEEE 802.3 for 10Base-T and IEEE 802.3u for 100Base-
TX compliant
Automatically negotiates 10 or 100 Mbps connection
rate, depending on the speed of the network
Provides full-duplex to enhance throughput
Support USB suspend / Rusume detection logic
Support Windows Plug & Play, Hot swap
3.3V low power consumption
LEDs diagnostics and monitoring indicators
Temperature: 0 ~ 70degree Celsius o
Humidity: 10% to 90% o
Distance: 100 m Hub to Node
Easily connects your Computer to a Network
without the need for a Network card.
Data sheet: LN-013
P. 1-1.
-
1
