ROOMS TO GO 42177697 Assembly Instructions

  • I have reviewed the assembly instructions for the NAJA 7769-1 LEG DINING TBL. This document outlines the two-step process of assembling the dining table, providing details on how to attach the legs, install the table leaf, and integrate the acrylic, decorative, and glass elements. I am ready to assist you with your questions regarding this assembly process.
  • What components are included with the table?
    How many steps are involved in assembling the table?
    What is the first assembly step?
    What is the second assembly step?
Page 1 of 1
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small
parts,which may have come loose inside the carton during shipment. Identify and count all parts and
compare with the HARDWARE LIST below.
Caution:Please read instructions thoroughly before unpacking assembly parts.
1.We recommend that you assemble this product with the assistance of another person; this will make assembly
easier, and will help to eliminate damage to the product or injury to persons during assembly.
2.Please put all parts on a non-abrasive floor before assembly,and follow the assembly steps to assemble your newly
purchased product correctly and efficently.
Assembly Instructions
Made in VietNam
Assembly completed
Made in VietNam
Assembly completed
A
NO. PARTS LIST Q' TY
B
1
4
HARDWARE LIST
Allen wrench (4mm)
1
1
2
Q' TY
NO.
8
Flat washer Ø 5/16" *Ø19mm*1.5mm
Allen Bolt Ø 5/16" * 18 * 75mm
Spring washer Ø 5/16" *Ø13mm * 1.5mm
C
1
OPEN
COMPLETED
1
2
D
E
F
2
2
2
Table Top
Leg
Table Leaf
Arcrylic Panel
Clear tempered glass
STEP/PASO:1
STEP/PASO:2
Decoration Piece
1
3
3
Plastic Inhaler
NAJA 7769-1 LEG DINING TBL SKU#42177697
This product is manufactured by NAJA for ROOMS TO GO
Hardware pack Location(s): NAJA 7769-1 LEG DINING TBL SKU#42177697
3.Do not tighten all bolts until the assembly is completed.
Assemble leg with the table top.
Open the cap lock, pull out the table top, put #B leaf into it,
then close the cap lock. Put black Acrylic #D, then decoration
peice #E, in the end put glass top #F.
/