2. ROOMS TO GO
  3. 42877691

ROOMS TO GO 42877691 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the NAJA 7769-8 bar cabinet. The document provides step-by-step instructions, a hardware list, and also highlights key safety measures, including the use of an anti-tipping kit and adjustable levelers. I'm here to help you with any questions about assembling your new bar cabinet.
  • What tool is required for assembly?
    Is assistance recommended during assembly?
    What should I use as a surface for assembly?
Remark: Tipping hardware
attached to the back panel.
WALL
A
NO. PARTS LIST Q' TY
1
HARDWARE LIST
1Anti tipping kits 1
Q' TY
NO.
Bar
Page 1 of 1
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small
parts,which may have come loose inside the carton during shipment. Identify and count all parts and
compare with the HARDWARE LIST below.
Caution:Please read instructions thoroughly before unpacking assembly parts.
1.We recommend that you assemble this product with the assistance of another person; this will make assembly
easier, and will help to eliminate damage to the product or injury to persons during assembly.
2.Please put all parts on a non-abrasive floor before assembly,and follow the assembly steps to assemble your newly
purchased product correctly and efficently.
Assembly Instructions
NAJA 7769-8 BAR CABINET SKU#42877691
Made in VietNam
Assembly completed
Made in VietNam
Assembly completed
Adjust leveler =4 pcs
This product is manufactured by NAJA for ROOMS TO GO
Hardware pack Location(s): NAJA 7769-8 BAR CABINET SKU#42877691
3.Do not tighten all bolts until the assembly is completed.
TOOLS REQUIRED (NOT PROVIDED)
Description Sketch
Phillips screwdriver
1
A
Assemble the tipping hardware
with the back strectcher.
/