Refer to the E5 R datasheet (H122) for more information.
, position proportional
ON/OFF
e limit, MV when stopped, MV for error, SV trackin
, special control (cascade, proportional
Digital Controller for Control Applications
Requiring Rapid Response and High Resolution.
The E5 R samples at 50 ms per loop for use with high-speed
response equipment, such as ceramic heaters. Measurements,
fluctuation detection, and logging for environmental testing equipment
are performed at a high resolution of 0.01°C.
The R in E5 R represents the two areas where this Digital Controller
excels - Rapid response and high Resolution.
isticated Digital Controlle
Note: Specifications subject to chan
Industrial Automation Compan
alaan 67-69, NL-2132 JD Hoofddor
1 East Commerce Drive, Schaumbur
Room 1028, Office Buildin
Capital Times Square,
No. 88 West Chan
for standard
control/1 loo
s for standard
control/2 loo
for standard
control with remote
ortional control
4 alarm out
uts,
RS-485 communications
for standard
control/1 loo
uts (control/transfer)
4 alarm out
uts,
RS-485 communications
uts,
RS-485 communications
s for standard
control/1 loo
for standard
control with remote
uts,
RS-485 communications
uts,
RS-485 communications
ortional control
4 alarm out