Auralex Cloud Mounting User guide

Installation & User Guide

Auralex® Acoustics, Inc.

1-800-959-3343 | 317-842-2600 | Auralex.com

9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256

Cloud Mounting

1075-913.Cloud Mounting Instruction Guide (01/13/2020 - 9:02 AM)

1. Place the ProPanels on a clean flat surface, back side up.

2. Review the illustrations below for proper Cloud Anchor placement. Do not install fewer Cloud Anchors than suggested. All

Cloud Anchors should be 6” from the ProPanel edge and should only be used on 2” thick ProPanels, 16 sq/ft in area or less.

3. Measure and mark the location of each Cloud Anchor on the rear surface of the panel that has exposed fiberglass (see guide

lines in the illustrations below).

4. Press the Cloud Anchor firmly into the marked location and twist clockwise until the top disc of the anchor is flat to the back of

the panel. Do not turn the Cloud Anchor so the top disc goes into the fiberglass, or you will risk deforming the front of the panel.

5. Using the Cloud Anchor ring, attach the panel to ceiling

hardware appropriate for the weight of the panel and your

ceiling’s construction (user supplied).

2" x 2' x 2'

ProPanel™ = 8 lb.

2" x 2' x 4'

ProPanel™ = 16 lb.

2" x 4' x 4'

ProPanel™ = 32 lb.

2’ 2’ 4’

2’

4’ 4’

Cloud Anchor ProPanel™

For detail on handling Auralex ProPanels, refer to the ProPanel Installation Guide included with your ProPanels.