WARNING: If incorrectly used this machine can cause severe
injury. Those who use and maintain this machine should be
trained in its proper use, warned of its dangers and should
read the entire manual before attempting to set up, operate,
adjust or service the machine.
FITTING INSTRUCTIONS
RJ 100 10 2005
24779G-GB (rev.0)
AR3/TR3 - RH Yoke Unit Bump Stop
For:
Series: EK - Engine type: Kubota D1105-T
Product code: AR30001
Series: EJ - Engine type: Kubota D1105-E
Product code: TR30001
2
© 2005, Ransomes Jacobsen Limited. All Rights Reserved
GB-3
JACOBSEN AR3/TR3
RH UNIT BUMP STOP FIELD KIT
FITTING INSTRUCTIONS
INSTALLATION INSTRUCTION
Assemble Bracket-Yoke stop 4138976 to
underside of operators platform to eliminate Yoke
of the RH unit contacting footpedal mechanism,
If the Decks are lowered whilst the transport
latches are still applied.
Remove front steering tower cover (4) from
Steering tower bracket.
Undo Coach bolts (25) on the RH side securing
the steering bracket tower, to the Operators
platform, and replace with longer coach bolts M8
x 30 (452565) supplied within LMAC210 kit.
Fit Bracket - Yoke Stop (39) in the orientation
shown and tighten in position.
BOB-CAT BUNTON CUSHMAN JACOBSEN RANSOMES RYAN E-Z-GO
Equipment from Ransomes Jacobsen Limited is built to
exacting standards ensured by ISO 9001 registration at
all our manufacturing locations. A worldwide dealer
network and factory-trained technicians backed by
Ransomes Jacobsen Parts Xpress provide reliable,
high-quality product support.
Ransomes Jacobsen Limited
West Road, Ransomes Europark, Ipswich, England, IP3 9TT
English Company Registration No. 1070731
www.ransomesjacobsen.com
World Class Quality, Performance and Support
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Ransomes AR30001, AR30002 Accessories Manual
-
Textron Jacobsen TR3 Accessories Manual
-
-
-
-
-
-
-
-
