1700AIO Installation Steps
Things you will need for this process:
1 Keyboard
1 Mouse (optional)
1 Hub
1 Flashdrive (3.0 & 16GB or more)
Preparation
1.) Format the Flash Drive as NTFS and name the drive WINPE
2.) Extract the .RAR file and copy the extracted files into the flash drive
3.) With the drive formatted and the files copied, It should look like this:
A .RAR extraction program like 7-ZIP
Installation
1.) Connect the prepared Flashdrive to your device.
2.) Once everything is connected, power on the device while tapping on the F7 key.
3.) A Blue Screen will Pop Up that states “Please Select Boot Device”, select your usb flash device and press “enter”
4.) Once Data is loading wait, procedure might take more than 15 minutes.
5.) Wait until screen shows: “x:/windows/system32>____”
6.) Type in “exit” in the blank space “x:/windows/system32>exit” then click “enter”
7.) Take USB out of tablet.
8.) “System Preparation Tool” will pop up, Click “ok”
9.) Windows device is ready to be use.
/
