Sylvania SMPK 4068 Operating instructions

1

Cautions

z Do not subject the device to severe impact or drop it from high position.

z Do not use the player in extreme hot or cold, dusty or damp field. Do not

expose it to direct sunshine.

z Excessive sound pressure from earphones and headphones can cause

hearing loss.

z Avoid using the player in strong magnetic field.

z Keep the device away from water or other liquids. In the event that water or

other liquids enter the device, power off the product immediately, and clean

the device.

z Do not use chemical solution to clean the device in order to avoid corrosion.

Clean it with a dry cloth.

z We are not responsible for the damages or lost data caused by malfunction,

misusing, repairing the device or battery replacement.

z Do not attempt to disassemble, repair or modify the product. This will

2

invalidate guarantee.

z The design of the player or actual display may be different from what is

shown in this manual. It should be subject to the actual display or design.

1. Key Features

z MP3&WMA Player

z AVI Video player

z JPEG image viewer

z Memory card reader

z Folder Navigation

z Voice Recorder

z Removable Storage Device

z Built-in rechargeable lithium-ion battery

z Customized settings

3

2. System Requirements

z Hardware: IBM PC & Compatible PC, Notebook with USB interface

z Operating System: Windows98/SE, Windows Me, Windows2000/XP,

Windows Vista

3. Package Content

z Main Unit

z Stereo earphones

z USB cable

z User Manual

z CD with video converter

4. Before Using

4.1 Connect to a PC and download audio files

This player is plug & play for WIN2000/XP/ME/Vista OS. But for Windows98/SE,

4

you are required to install a driver before connection.

To connect it with PC for transferring files,

(1) Plug the larger end of the USB cable to the USB port of the PC, and plug the

smaller end to the USB port of the player.

(2) When the “

” icon appear at the right bottom of the PC screen, double click

“My Computer” on the desktop, you see a removable disk which indicates the

player. Just use the removable disk as a regular local disk, copying files from

or to it.

4.2 Removing the player from the PC safely

For Windows2000/XP/ME/Vista:

(1) Left click the

icon at the right hand corner of the taskbar.

(2) Click the pop-up mini-window with message of “Stop the USB Mass Storage

Device – Drive (X)”.

(3) When you are prompted to remove the device, pull out the player.

For Win98, please make sure the data transfer is completed before unplugging the

5

MP3 player.

4.3 Charge the battery

The device has a built-in lithium-icon rechargeable battery. It is charged via USB

connection. You are required to charge it when you use it for the first time. It takes

about 3 hours to fully charge the battery. Connect the larger end of the USB cable to

the USB interface of PC, and connect the other smaller end of the USB cable to the

USB interface of this player. The device is connected to PC and being charged.

NOTICE: For maximum performance, lithium-ion batteries need to be used often. If you

don’t use the device often, be sure to recharge the battery at least once per month.

4.4 Using memory card

The device has a memory card slot for reading data from a micro-SD card.

To use a memory card,

6

(1) Insert a Micro-SD card to the card slot on the unit body.

(2) Press and hold the MENU button to display the main menu.

(3) Select “Explorer” and press the MENU button to enter the folder browser mode.

(4) In the folder browser mode, you see two folders named “Internal memory” and

“Micro SD”. To play the audio or video files stored on the memory card, access the

“Micro SD” folder.

7

5. Keys Description

(1) LCD Display

(2) Earphone Jack

(3) VOL+: Increase the volume

(4) MENU: Briefly press to confirm

selection. Press and hold to

enter the main menu.

(5) PREVIOUS: Play the previous

track

(6) NEXT: Play the next track

(7) VOL-: Decrease the volume

(8) PLAY/PAUSE: Press to play,

pause or escape.

(9) Micro-SD Card slot

(10) ON/OFF: Turn on or turn off the

power.

(11) USB port

8

6. Power On/Off

To power on,

(1) Turn on the ON/OFF button.

(2) Press and hold the PLAY/PAUSE key until you see prompt on the display.

To power off,

(1) Press and hold the PLAY/PAUSE key until you see prompt on the display.

(2) Turn off the ON/OFF button. (Be sure to complete this step in order to extend the

battery life.)

Note:

This player has a power-saving feature which enables the device to power off

automatically if it is idle for about 3 minutes.

7. Basic operation

9

Function Operation

Play/Pause Press the PLAY/PAUSE button to play or pause.

Adjust Volume Shortly press the VOL+/VOL- button to decrease or increase

volume.

Previous Track Shortly press the PREVIOUS button.

Next Track Shortly press the NEXT button.

Fast Forward Press and hold the NEXT button.

Rewind Press and hold the PREVIOUS button.

A-B Repeat To repeat a specified section of a track,

(1) During playing, press and hold the VOL+ button to select

the start point of the repeat.

(2) Press and hold the VOL+ button again to select the stop

point. The music section between the start point and the

stop point is repeated.

10

(3) To stop A-B repeat, press the VOL+ button.

Lock/Unlock

buttons

To protect the buttons against being pressed accidentally or

unlock buttons, hold down the MENU button and the VOL-

together.

8. Playing music

8.1 Enter the music mode

Press and hold the MENU button to display the main menu. Use the PREVIOUS/NEXT

11

button to select “Music” menu, and press the MENU button to confirm selection. Now you

are in the MUSIC mode, refer music playing to the basic operations.

8.2 Folder navigation

To navigate through folders:

(1) In the MUSIC mode, shortly press the MENU button to enter folder navigation mode.

(2) Press the PREVIOUS/NEXT button to select a folder or track, and press the MENU

button to confirm selection, or press the PLAY/PAUSE button to return.

8.3 Display lyric

To display lyric while you are listening music,

(1) Copy a lyric file in LRC format to your player. Please note that the LRC file should be

in the same directory and have the same name of the track to be listened.

(2) Play the track. Then press and hold the VOL- button to switch between lyric and ID3

display mode. In the ID3 mode, the lyric is not displayed, only ID3 information of

current track is displayed.

12

9. Playing videos

(1) Press and hold the MENU button to display the main menu.

(2) Use the PREVIOUS/NEXT button to select the “Video” menu, and press the MENU

button to enter the video player mode.

(3) Press the PREVIOUS/NEXT button to search a video file that you want to play, and

press the MENU button to play. For detail information about playing, see the “Basic

Operation” section. (Note: During playing, you can shortly press the MENU button to

enter folder navigation mode.)

13

Note This player can only play AVI videos. For other formats, you need to use the

converting tool included on the driver CD to convert them. For detail information about the

converter, see AVI Converter Quick User Guide on the CD.

Detail information for converter tool:

Before installing the AVI converter, make sure that the Windows OS is installed with

DirectX9.0 or above.

Before you download videos to the device, make sure they are AVI files and can be

played by the device. If not, convert them using the included converting tool on the driver

CD. The following steps show how to convert:

1) Install the AVI Converter

(1) Place the included CD on the CD-ROM tray of a computer.

(2) Double click the “AVI converter” folder.

(3) Run “AVI Converter CHN – EN setup.exe” to show up the following window.

14

(4) Select an installation interface language.

15

(5) Click “Next” to continue. Browse to a destination for the installation.

16

(6) Click “Install” to start installation.

17

(7) Wait for the installation to be completed before you see the following window. Click

“Finish” to finish installation.

18

2) Use the AVI converter

(1) Select “Program files” → “AVI Converter” on the Start menu to see the following

19

window.

(2) Click button to display “Conversion Setting” window.

20

(3) For the “Source File” field, specify the file that you want to convert by clicking the

button on the right. For the “Target File Path” field, specify the destination where the

converted file is saved.

(4) Set the conversion quality in the Quality field and display mode in the Aspect Ratio

filed.

(5) Click “Save” to save your setting. To convert another file, repeat the steps above.

(6) Click “close” button to close the setting window.

Page is loading ...

Sylvania SMPK 4068 Operating instructions

Sylvania SMPK 4068 Operating instructions

Related papers

Other documents