IVIEW 3100STB Operating instructions

3100STB installation

1.) Download the firmware and copy it onto the USB

2.) Plug the USB into the converter box and power it on.

3.) With the usb plugged in and the converter box turned on press the MENU button on your converter

box remote. Use the volume and channel buttons, navigate to the icon of the red toolbox.

4.) Press the OK button and navigate to the option UPGRADE BY USB.

5.) Make sure the settings are the same as below. Navigate to START and press OK.

6.) Upgrade process will begin. When prompted, select YES.

7.) Once upgrade is complete, box will reset back to factory default