Manual # 650498A
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
3. Connect a CAT5 cable to the back
of each VHX gauges and take care
when routing the other ends to the
control box mounting location.
2. The VHX system is a direct
replacement of the original cluster, so
use the three mounting studs for each
gauge along with the factory hardware
to secure the VHX system to the dash.
4. Refer to the main manual for wiring instructions to complete the VHX installation.