Mounting
Ordering number for control panel LCP 21: 130B0254
1. Slide the control panel LCP 21 into the display cradle
on the top of the frequency converter.
Illustration 1.1 Mount LCP 21
Installation Instructions
VLT
p
AutomationDrive FC 360 Control Panel LCP
21
MI06B102 - VLT
p
is a registered Danfoss trademark
2. Push LCP 21 into place.
Illustration 1.2 Push into Place
Illustration 1.3 Installation Completed
*MI06B102*
MI06B102132R0206 Rev. 2012-12-18
-
1
-
2
Danfoss VLT® FC 360 Numeric Local Control Panel Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Danfoss VLT HVAC Basic Drive FC 101 Installation guide
-
Danfoss Cascade Controller Options MCO 101/102 Installation guide
-
Danfoss VLT® Active Filter AAF 005 Operating instructions
-
-
Danfoss VLT Soft Starter MCD 600 Installation guide
-
Danfoss Remote Mounting of LCP Installation guide
-
-
-
-
Danfoss VLT AutomationDrive FC 301 Installation guide