Dell Storage vRealize Operations Management
Pack
Version 1.3
Administrator’s Guide
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2018 - 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its
subsidiaries. Other trademarks may be trademarks of their respective owners.
2019 – 12
Rev. A
About This Guide
This document provides the purpose and audience of the Dell Storage vRealize Operations Management Pack Administrator’s Guide and a
list of related publications.
Revision History
Document number 680-109-003
Revision Date Description
A December 2019 Initial release
Purpose
The Dell Storage vRealize Operations Management Pack Administrator’s Guide provides instructions for installing and configuring the Dell
Storage vRealize Operations Management Pack. It also describes the dashboards that are included with the Dell Storage vRealize
Operations Management Pack and provides information on how to use these dashboards to analyze and troubleshoot the environment.
Audience
The intended audience of this guide is information technology professionals who have intermediate to expert knowledge of Dell Storage
Center and Dell Storage Manager. This guide assumes administrative working knowledge of the VMware vRealize Operations Manager.
Related Dell Publications
In addition to this guide, see the following related publications for more information on related topics. All Dell documentation is available
from
www.dell.com/support.
Dell Storage Manager Administrator’s Guide - Provides configuration and management instructions for Dell Storage Manager, which
allows enterprise‐ level management of multiple Storage Centers, including setting up and monitoring replications and disaster recovery
sites. In addition, Dell Storage Manager provides various system‐generated performance reports and the ability to create custom reports.
VMware Documentation
It is beyond the scope of this document to provide VMware conceptual information or detailed instructions for configuring the vRealize
Operations Manager. See the VMware publications website: https://www.vmware.com/support/pubs/vrealize-operations-manager-
pubs.html.
Preface
1 Getting Started............................................................................................................................ 5
Introduction............................................................................................................................................................................ 5
Requirements......................................................................................................................................................................... 5
Installing and Configuring the Management Pack.............................................................................................................5
Obtain the PAK File......................................................................................................................................................... 5
Install the Dell Storage Management Pack.................................................................................................................. 5
Update Installation........................................................................................................................................................... 6
Add an Adapter Instance................................................................................................................................................ 6
2 Working with Dashboards............................................................................................................. 8
Viewing Dashboards.............................................................................................................................................................. 8
View Dell Storage & VMware Relationship.................................................................................................................. 8
View Dell Storage Metrics.............................................................................................................................................. 9
View Dell Storage Volume Top-N Reports..................................................................................................................10
View Dell Storage at a Glance....................................................................................................................................... 11
View Dell Storage Port Top-N Reports........................................................................................................................11
Modifying Dashboards and Widgets.................................................................................................................................. 12
Contents
4 Contents
Getting Started
The Dell Storage vRealize Operations Management Pack is an embedded adapter that gathers topology, metrics, and alerts from Dell
Storage Manager for display on dashboards in VMware vRealize Operations Manager. This guide refers to the embedded management
pack as the Dell Storage Management Pack.
Topics:
• Introduction
• Requirements
• Installing and Configuring the Management Pack
Introduction
The Dell Storage Management Pack allows users to monitor and analyze the health and status of the network resources managed by Dell
Storage Manager. The Dell Storage Management Pack pulls data from Storage Centers managed by Dell Storage Manager.
NOTE:
The Dell Storage Management Pack requires VMware vRealize Operations Manager version 7.0 or 7.5.
Requirements
The following table lists the requirements for the Dell Storage Management Pack.
Product
Requirements
VMware vRealize Operations Manager Version 7.0 or 7.5
Dell Storage Manager Dell Storage Manager 2018 R1 and later
Installing and Configuring the Management Pack
You install the Dell Storage Management Pack, and then add and configure the adapter instances. Each adapter instance represents a Dell
Storage Manager Data Collector from which data is gathered and then displayed on the Dell Storage dashboards for further analysis.
Obtain the PAK File
Dell provides a standard VMware PAK file for installing the Dell Storage Management Pack.
The file is named DellStorageAdapter–01.03.00xx_signed.pak. This file is also available from VMware’s Solution Exchange
Portal.
Download this PAK file and save it to a location such as your computer desktop.
Install the Dell Storage Management Pack
Before starting the installation process, make sure that you have downloaded the Dell PAK file to your local system.
1. Open a browser window to your vRealize Operations Manager in the following format:
https://IP
Replace IP with the fully-qualified domain name (FQDN) or IP address of the vRealize Operations Manager.
2. When prompted, type the Administrator user name and password.
The vRealize Operations Manager user interface opens.
3. Add a solution:
1
Getting Started 5
• For vROPS version 7.5: In the left pane of vRealize Operations Manager, click Administration > Solutions > Repository.
• For earlier versions of vROPS: In the left pane of vRealize Operations Manager, click Administration > Solutions
4. On the Solutions tab, click the plus sign (+).
The Add Solution page opens.
5. Click Browse to navigate to the location of the PAK file.
6. Select the DellStorageAdapter PAK file.
Figure 1. Add Solutions Page
7. Click Upload.
NOTE:
The upload might take several minutes.
A confirmation page indicates that the PAK file was uploaded.
8. Click Next to continue.
The Dell End User License Agreement (EULA) page appears.
9. To accept the terms of the agreement, select the checkbox, then click Next.
The update procedure begins. The installation could take several minutes to complete.
10. Click Finish.
The Dell Storage vRealize Management Pack is listed in the Solutions table.
Update Installation
Follow these steps to update the Dell Storage vRealize Management Pack from version 1.2 to 1.3:
1. Update vRealize Operations Manager from version 6.7 to 7.0 with Dell Storage vRealize Operations Management Pack version 1.2.
2. Update the Dell Storage vRealize Operations Management Pack from version 1.2 to version 1.3.
Add an Adapter Instance
Add an adapter instance by providing the hostname or IP address of the Data Collector and the login credentials of an Admin user on the
Data Collector.
An adapter instance is required for each Data Collector being monitored.
1. In a browser, open the vRealize Operations Manager user interface.
2. Log in as an administrator.
3. Open the Manage Solution dialog box:
• For vROPS version 7.5: Click Administration > Solutions > Configuration.
• For earlier versions of vROPS: Click Administration > Solutions
The Solutions page opens.
6
Getting Started
4. Select Dell Storage vRealize Operations Management Pack, and then click the Configure button ( ).
The Adapter Settings dialog box opens.
Figure 2. Adapter Settings for Dell Storage Adapter
5. In the Display name field, type a name for the adapter instance.
6. (Optional) Type a description for the adapter instance.
7. Type the hostname or IP address of the Data Collector.
8. (Optional) Type the port number of the Data Collector.
9. To use Auto Discovery, keep the Auto Discovery value set to true.
10. To add login credentials, click the plus sign (+) next to the Credential drop-down menu.
The Manage Credentials dialog box opens.
Figure 3. Manage Credential Dialog Box
11. Specify login credentials for both the Admin user on the Data Collector and the vROPs appliance:
a) User Name/Password — enter the login credentials of an Admin user on the Data Collector.
b) vROPS User Name/Password — enter the login credentials of the vROPs appliance.
12. Click OK.
13. Click Test Connection to validate that the settings are correct.
14. (Optional) Expand Advanced Settings and select a different Data Collector from the list.
15. Click Save Settings.
16. Click Close.
Getting Started
7
Working with Dashboards
Several dashboards are prepackaged with the Dell Storage Management Pack. The Dell Storage dashboards provide a starting point for
monitoring and analyzing your environment. The dashboards are fully configurable and can be modified to better represent your
environment.
Topics:
• Viewing Dashboards
• Modifying Dashboards and Widgets
Viewing Dashboards
The Dell Storage dashboards are accessed from the Dashboards menu of the vRealize Operations Manager user interface. To select and
view a Dell Storage dashboard, use the following procedure:
1. Open the vRealize Operations Manager user interface in a browser window.
2. Log in to the vRealize Operations Manager with Administrator credentials.
The vRealize Operations Manager user interface opens.
3. Click Home > Dashboard List.
4. Select from the list of available dashboards.
The Dell Storage Management Pack provides the following dashboards:
• Dell Storage & VMware Relationship
• Dell Storage Metrics
• Dell Storage Volume Top‐N Reports
• Dell Storage at A Glance
• Dell Storage Port Top‐N Reports
View Dell Storage & VMware Relationship
This dashboard provides a visual representation of the relationship between VMware and Dell Storage resources.
Select a resource from the Dell Storage & VMware Relationship View to view its Object Relationship Health Tree, Sparkline Chart, Alerts,
and Metric Chart.
The following figure shows an example of the dashboard.
2
8 Working with Dashboards
Figure 4. Sample Dell Storage & VMware Relationship Dashboard
View Dell Storage Metrics
This dashboard displays the health status and metrics for the selected Storage Center.
1. Select a resource for the Storage Center from the Select Resource to View Metrics widget.
2. Select a metric to graph for the resource from the Select Metrics to Graph widget.
3. Select the graph type from the Metric Graph widget.
The following figure shows an example of a Dell Storage Metrics dashboard.
Working with Dashboards
9
Figure 5. Sample Dell Storage Metrics Dashboard
View Dell Storage Volume Top-N Reports
This dashboard lists the top 25 volumes for the following categories:
• Dell Storage Volume Total IO/sec (24h)
• Dell Storage Volume Total KB/sec (24h)
• Dell Storage Volume Read IO/sec (24h)
• Dell Storage Volume Write IO/sec (24h)
• Dell Storage Volume Replay Space
• Dell Storage Volume Capacity
The following figure shows an example of a Dell Storage Volume Top-N Reports dashboard.
Figure 6. Sample Dell Storage Volume Top-N Reports Dashboard
10
Working with Dashboards
View Graph of Metric
Click a row on any widget to view a graph of the metric.
Modify Period Length
Except for the Replay Space and Volume Capacity widgets, each widget lists the top 25 volumes for the last 24-hour period. Edit the
widget to adjust the duration.
1. Click Edit Widget.
The Edit Top‐N Analysis Widget dialog box appears.
2. Select the new time period from the Period Length drop‐down menu.
3. Click OK.
Alternatively, to analyze the top volumes for different durations, clone the dashboard and then adjust the Period Length for each
widget on the new dashboard.
View Dell Storage at a Glance
This dashboard displays the health status, storage array controllers, disk tiers, and alerts for the selected Storage Center.
1. Select the Storage Center from the Storage Array Selector.
The Selected Storage Array Health Tree widget is updated to show the topology and health badges of the Storage Center
resources.
2. Click a resource on the Selected Storage Array Health Tree widget to view its metrics in the Metric Sparklines ‐ Select From
Health Tree widget.
The following figure shows an example of a Dell Storage at a Glance dashboard.
Figure 7. Sample Dell Storage at a Glance Dashboard
View Dell Storage Port Top-N Reports
This dashboard lists the top 25 ports for the following categories:
• Storage Front End Total IO/Sec (24h)
• Storage Front End Total kb/Sec (24h)
• Storage Front End Port Write IO/Sec (24h)
Working with Dashboards
11
• Storage Front End Port Read IO/Sec (24h)
• Storage Front End Port Write Latency IO/Sec (24h)
• Storage Front End Port Read Latency (24h)
The following figure shows an example of a Dell Storage Port Top-N Reports dashboard.
Figure 8. Sample Dell Storage Port Top-N Reports Dashboard
View Graph of Metric
Click a row on any widget to view a graph of the metric.
Modify Period Length
The length of time is configurable by editing the widget and selecting a new time value.
1. Click Edit Widget.
The Edit Top‐N Analysis Widget dialog box appears.
2. Select the new time period from the Period Length drop‐down menu.
3. Click OK.
Alternatively, to analyze the top volumes for different durations, clone the dashboard and then adjust the Period Length for each
widget on the new dashboard.
Modifying Dashboards and Widgets
See the VMware vRealize Operations Manager documentation for detailed information on working with dashboards and widgets:
https://www.vmware.com/support/pubs/vrealize-operations-manager-pubs.html
12
Working with Dashboards
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Dell Storage SCv3020 User guide
- Type
- User guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Dell Storage SC8000 Administrator Guide
-
Dell Storage SCv2000 User guide
-
-
-
Dell Current Version User guide
-
-
-
-
-
Other documents
-
VMware vRealize vRealize Suite 6.0 Quick start guide
-
-
-
-
-
-
-
VMware vRealize Operations Manager 6.6 User guide
-
-