Axis M7014 User manual

Category
Video servers/encoders
Type
User manual
USER'S MANUAL
AXIS M7014
About this document
This manual is intended for administrators and users of the AXIS M7014
Video Encoder, and is applicable to rmware 5.40 and later. It includes
instructions for using and managing the product on your network.
Previous experience of networking will be of use when using this
product. Some knowledge of UNIX or Linux-based systems may also be
benecial, for developing shell scripts and applications. Late r versions
of this document will be posted to the Axis website, as required. See
also the product’s online help, available via the we b -ba sed interface.
Liability
Every care has been taken in the preparation of this manual. Please
inform your local Axis ofce of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible for any technical or
typographical errors and reserves the right to make changes to the
product and manuals w ithout prior notice. Axis Communications A B
makes no warranty of any kind with regard to the material contained
within this document, including, but not lim ited to, the implie d
warranties of merchantability and tness for a partic u lar purpose. Axis
Communications AB shall not be liable n or responsible for incidental or
consequential damages in connection with the furnishing, performance
or use of this mat eria l. Th is product is only to be used for its intended
purpose.
Intellectual Property Rights
Axis AB has intellectual property rights relating t o technology embodied
in the product described in this document. In particular, and without
limitation, these intellectual property right s may include one or more
of the patents listed at h ttp://www.axis .com/patent.htm and one or
more additional patents or pending pate nt applications in the US and
other countries.
This product contains licensed third-party software. See the menu item
“About” in the product’s user interface for more information.
This product contains source code copyright Apple Computer,
Inc.,underthetermsofApplePublicSourceLicense2.0(see
http://www.opensource.ap ple.com/apsl). The source code is available
from http://develo per.apple.co m/darwin/p rojects/bonjour/
Equipment M odications
This equipment must be installed and used in strict accordance with the
instructions given in the user documentation. This equipment contains
no user-serviceable components. Unaut horized equipment changes or
modications will invalidate a ll applicable regulatory certications
and approvals.
Trademark Acknowledgments
Apple, Boa, Bonjour, Ethernet, Interne t Explorer, Linux, Microsoft,
Mozilla, Real, SMPTE, QuickTime, UNIX, Windows , Windows Vista and
WWW are registered trademarks of the respe ctive holders. Java and
all Java-based trademarks and logos are trademarks or registered
trademarks of Oracle and/or its afliates. UPn P
TM
is a certi c
ation
mark of the UPnP
TM
Implementers Corporation.
Support
Should you require any technical assistance
,pleasecontactyourAxis
reseller. If your questions cannot be answered immediately, your
reseller will forward your queries through the appropriate channels to
ensure a rapid resp onse. I f you are connec
tedtotheInternet,youcan:
download user documentation and software u pdates
nd answers to resolved problems in the FAQ database. Search
by product, category, or phrase
report problems to Axis support staff by lo gging in to your private
support area
chat with Axis support staff (se lected countries only)
visit Axis Support at www.axis.com/techsup/
AXIS M7014
Table of Contents
HardwareOverview .......................................... 4
Connectors .................................................... 4
LEDIndicators .................................................. 5
AccessingtheProduct ....................................... 6
AccessfromaBrowser ........................................... 6
AccessfromtheInternet .......................................... 7
SettheRootPassword ........................................... 7
TheLiveViewPage .............................................. 8
MediaStreams ............................................. 10
HowtoStreamH.264 ............................................ 10
MJPEG ........................................................ 10
AXISMediaControl(AMC) ........................................ 10
AlternativeMethodsofAccessingtheVideoStream .................... 11
SettingUptheProduct ...................................... 13
BasicSetup .................................................... 13
Video ..................................................... 14
VideoStream ................................................... 14
Quadstream ................................................... 15
Stream Pro les ................................................. 15
CameraSettings ................................................ 15
PrivacyMask ................................................... 16
Overlay ........................................................ 16
Live View Cong ............................................ 18
PTZ(PanTiltZoom) ......................................... 20
PresetPositions ................................................. 20
Advanced ...................................................... 20
ControlQueue .................................................. 21
Detectors .................................................. 22
CameraTampering .............................................. 22
MotionDetection ............................................... 22
Events .................................................... 25
SettingUpanActionRule ........................................ 26
Recipients ..................................................... 26
Schedules ...................................................... 27
Recurrences .................................................... 27
Recordings ................................................. 28
RecordingList .................................................. 28
ContinuousRecording ............................................ 28
SystemOptions ............................................. 30
Security ....................................................... 30
Date&Time .................................................... 31
Network ....................................................... 32
Storage ....................................................... 36
Maintenance ................................................... 37
Support ....................................................... 38
Advanced ...................................................... 39
ResettoFactoryDefaultSettings ................................... 39
Troubleshooting ............................................ 40
CheckingtheFirmware ........................................... 40
UpgradingtheFirmware .......................................... 40
EmergencyRecoveryProcedure .................................... 40
Symptoms,PossibleCausesandRemedialActions ..................... 41
Technical Specications ...................................... 44
PerformanceConsiderations ....................................... 45
3
AXIS M7014
Hardware Overview
Hardware Overview
1
2
3
4
5
6
7
8
1.
Mounting holes
2.
Video input connectors
3.
LED indicators for power, status and network
4.
SD memory card slo t (microSD)
5.
RS-485/RS-422 connector
6.
Control button
7.
Power connector
8.
Nework connector (PoE)
Connectors
For technical specications, see
page 44
.
Network connector - RJ-45 Ethernet connector. Supports P ower over Ethernet (PoE).
NOTICE
Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded
network cable (STP) may be appropriate or required. Any network cab les that a re routed in ou tdoor environments or similar
shall be shielded (STP) and intended for their specic use. Make sure that the network switch is properly grounded. See
for regulatory requirements.
SD card slot - A standard or high-capacity SD card (not included) can be used for local recording with removable storage.
NOTICE
To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System
Options > Storage > SD Card and click U
nmount.
Control button - The control button is used for:
ConnectingtoanAXISVideoHostingSystemservice.See
page 32
. To connect, press and hold the button for about
1 second until the Sta
tus LED ashes green .
ConnectingtoAX
IS Internet Dynamic DNS Service. See
page 33
. To connect, press and hold the button for
about 3 seconds.
Resetting the product to factory default settings. See
page 39
.
Power connector - 2-pin terminal blo ck for power input.
RS-485/RS-422 connector - Two 2-pin terminal blocks for RS-485/RS-422 serial interface used to control a uxiliary equipment,
e.g. PTZ devices.
4
AXIS M7014
Hardware Overview
LED Indicators
LED
Color
Indication
Green
Steady for connection to a 100 MBit/s network. Flashes for network activity.
Amber
Steady for connection to a 10 M Bit/s netwo rk. Flashes for network activity.
Network
Unlit No network connection.
Green Steady g reen for normal operation.
Amber
Steady during startup and when restoring settings.
Status
Red
Slow ash for failed upgrade.
Green
Normal operation.
Power
Amber
Flashes green/amber during rmware upgrade.
Note
The Status LED can be congured to be unlit during normal operation. To congure, go to Setup > System O ptions >
Ports & Devices > LED. See the online help for more information.
5
AXIS M7014
Accessing the Product
Accessing the Product
To install the Axis product, refer to the Installation Guide supplied with the product.
The product can be used with most operating systems and browsers. The recommended browsers are Interne t Explorer with Windows ,
Safari w ith Macintosh and Fire fox with other operating systems. See
Technical Specications, on page 44
.Toviewstreamingvideoin
Internet Exp lore r, allow installation of AXIS M edia Control (AMC) w he n prompted.
The Axis product includes one (1) H.264 decoder license for view ing video streams. The license is automatically installed with AMC.
The administrator can di sa ble the installation of the decoders, to prevent installation of unlicensed copies.
Note
QuickTime
TM
is also supported for viewing H.264 streams.
If your computer restricts the use of additional software components, the product can be congured to use a Java
applet for viewing Motion JPEG.
Access from a Browser
1. Start a browser (Internet Explorer, Firefox, Safari).
2. Enter the IP address or host name of the Axis product in the browser’s Location/Address eld. To access the product from a
Macintosh computer (Mac OS X), click on the Bonjour tab and select the product from the drop-down list.
If you do not know the IP address, use AXIS IP Utility to locate the product on the netw ork. For more information on how to
discover and assign an IP address, refer to the Installation Guide.
3. Enter your user name and password. If this is the rst time the product is acce ss ed, the root password must rst be
congured; for instructions see
Set the Root Password, on page 7
.
4. The product’s Live View page appears in your bro wser.
Note
The controls a nd layout of the Live View p age may have been customized to meet sp ecic installa tion requirements and
user p refer ence s. Consequently, some of the examples and functions fe
atured here m ay diffe r from those displayed in
your own Live View page.
6
AXIS M7014
Accessing the Product
Access from the I nternet
Once connected, the Axis product is accessible on your local network (LAN). To access the product from the Internet you must
congure your netw ork router to allow incoming data trafc to the product. To do this, enable the NAT-traversal feat ure, which
will attempt to automatically co ngure the router to allow access to the product. This is e n able d f rom Setup > System O ptions >
Network > TCP/IP Advanced.
For m o re information, please see
NAT traversal (port mapping) for IPv4, on page 34
. See also AXIS Internet Dynamic DNS Service at
www.axiscam.net For Technical notes on this and other topics, visit the Axis Support web at w w w.axis.com/techsup
Set the Root Pa ssword
To gain access to the Axis product, you must set the password for the default administrator user root. This is done in the Congure
Root Password dialog , which appears w hen the pro
duct is accessed for the rst time.
To prevent network eavesdropping
, the root password can be set via an encrypted HTTPS connection, which requires an HTTPS
certicate. HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt trafc between web browsers and servers. The
HTTPS certicate ensures encrypted exchange of information.
To set the password via a standard HTTP connection, enter it directly in the rst dialog.
To set the password via an e ncrypted HTTPS c onnection, follow these steps:
1. Click Create self-signed certicate.
2. Provide the requested information and click OK.Thecertica te is created and the p a ssword can now be set securely. All
trafcto
and from the product is encrypted from this point on.
3. Ente
rapasswordandthenre-entertoconrm the spelling. Click OK. The password has now been congured.
7
AXIS M7014
Accessing the Product
Note
The default administrator user name root is permanent and cannot be deleted.
If the password for root is lost, the product m ust be reset to the factory default settings. See
Reset to Facto ry Default
Settings, on page 39
.
TheLiveViewPage
The controls and layout of the Live View page may have been customized to meet specic installation requirements and user
preferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own Live View
page. The fo llow ing provides an overview of each available control.
Controls on the Live View Page
The Stream Prole drop-down list allow s you to select a custom ized or pre-programm ed stream prole . Stream
proles are congured under Video > S trea m Proles.See
Stream Proles, on page 15
.
The Manual Trigger button is used to trigger an action rule from the Live View page, s ee .
Click Snapshot to save a snapshot of the video image. Right-click the video image to save it in JPEG format on your
computer. This button is primarily intended for use when the AXIS M e dia Control viewer toolbar is not available.
Enable this button from Live View Cong > Action Buttons.
AXIS Media Control viewer toolbar
The AXIS Med ia Control viewer toolbar is available in Inte rne t Explorer only. Se e
AXIS Media Control (AMC), on page 10
for more
information. The toolbar displays the following buttons:
8
AXIS M7014
Accessing the Product
The Play button connects to the Axis product and starts playing a media stream.
The Stop button stops the media stream.
The Snapshot button takes a snapshot of the video image. The locationwheretheimageissavedcanbespecied
in the AMC Control Panel.
Click the View Full Screen button and the video image will ll the entire screen. Press ESC (Escape) on the computer
keyboard to cancel full screen view.
The Record button is used to record the current video stream . The lo ca tion w her e the re cording is saved can be specied
in the AMC Control Panel.
PTZ Controls
The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/ disable controls for specied users under
System Options > Security > Users.
With the PTZ Control Queue enabled the time each user is in control of the PTZ settings is limited. Click the buttons to request or
release control of the PTZ controls . The PTZ Control Queue is set up under PTZ > Control Queue.
Click the Emulate joystick mode button and click in the ima ge to move the camera view in the direction of the
mouse pointer.
Click the Center mode button and click in the image to center the camera vie w on that position. The center m ode
button could also be used to zoom in on a specic area. C lick in the image and drag to d ra w a rectangle surrounding
theareatobemagnied. To zoom out, rotate the mouse wheel.
Click the Ctrl panel button to open the PTZ control panel which pro vides additional PTZ controls.
User-dened buttons can also appear in the Control panel. See
Controls, on page 20
.
Select the video channel or a PTZ preset position to steer the camera view to the saved position. See
Preset Positions, on pag e 20
.
Pan and Tilt bars Use the arrows to pan and tilt the camera view, or click on a position on the bar to steer the
camera view to that position.
Zoom bar Use the arrows to zoom in and out, or click on a posit
ion on the bar to zoom to that position.
Focus bar Click on a position on the focus bar to set the focus position. This will disable the product’s autofocus. To
re-enable, use the PTZ control panel which is opened by clicking the Ctrl panel button (see a bove).
Iris bar Click on a position on the iris bar to change the degre e to wh ich the iris is ope ned . This will disable the
product’s auto iris. To re-enab
le, use the PTZ control panel which is opened by clicking the Ctrl panel button (see above).
The PTZ controls can be dis abled under PTZ > Advanced > Controls,see
Controls, on page 20
.
9
AXIS M7014
Media Streams
Media Streams
The Axis product provide s s evera l video stream form a ts. Your requirements and the properties of your netw o rk will determine the
type you use.
The Live View page in the product provides access to H.264 and M otion JPEG video streams, and to the list of available stream proles.
Other applications and clients can access video streams directly, without going via the Live View p age.
How to Stream H.264
The video compression standard H .264 makes good use of bandwidth, and can provide high quality vid eo streams at less than 1 Mbit/s.
Deciding which combination of protocols and methods to use depends on your viewing requirements, and on the properties of
your network. The available options in AXIS Media Control are:
Unicast RTP
This unicast method (RTP over UDP) is used
for live unicast video, especially w hen it is
important to always have an up-to-date video
stream, e ven if some images are dropped.
RTP over RTSP
This unicast method (RTP tunneled over RTSP)
is useful as it is relatively simple to con gure
rewallstoallowRTSPtrafc.
RTP over RTSP over H TTP
This unicast method can be used to traverse
rewalls. Firewalls are comm only con gured to
allow the H TTP protocol, thus allowing RTP to
be tunneled.
Unicasting is used for video-on-demand
transmission so that there is no video tra fc
on the network until a client connects and
requests the stream.
Note that there are a maximum of 20
simultaneous unicast connections.
Multicast RTP
This method (RTP over UDP) should be used for live m ulticast video. The video stream is always
up-to-date, even if some images are dropped.
Multicasting provides the most efcient usag e of bandwidth when there are large numbers of
clients viewing simultaneously. A multicast cannot however, pass a network router unless the
router is congured to allow this. It is not possible to multicast over the Internet, for example.
Note a lso that all multicast viewers count as one unicast viewer in the maximum total of 20
simultaneous connections.
AXIS Media Control negotiates with the Axis product to determine the transpo rt protocol to use. The order of priority, listed in the
AMC Control Panel, can be changed and the options disabled, to suit specic requirements.
Note
H.264 is licensed technology. The Axis product includes one H.264 viewin g client license. Installing ad ditional unlicensed
copies of the client is prohibited. To
purchase additional lice nses, contac t your Axis reseller.
MJPEG
This format uses standard JPEG s t ill im ages for the video stream. These images are then displayedandupdatedataratesufcient
to create a stream that sho ws constantly updated m o tion.
The Motion JPEG stream uses considerable amounts of bandwidth, b ut provides excellent image qualityandaccesstoeveryimage
contained in the stream. The recommended method of accessing Motion JPEG live video from the Axis product is to use the AXIS
Media Control in Intern et Explorer in Windows.
AXIS Media Control (AMC)
AXIS Media C ontrol (AMC) in Internet Explorer in Window s is the recom m e nded method of accessing live video from the Ax is product.
10
AXIS M7014
Media Streams
TheAMCControlPanelcanbeusedtocongure various video settings. Please see the AXIS Media Control User’s Manual for more
information.
The AMC Control P ane l is automatically installed o n rst us e, after which it can be congured. Open the AMC Control Panel from:
Windows Control Panel (from the Start menu)
Alternatively, right-click the video image in Internet Explore r and click Settings.
Alternative Methods of Accessing the Video Stream
You can also access video and images from the Axis product in the following ways:
Motion JPEG server push (if supported by the client, F irefox, for example). This option maintains an op en HTTP connection
to the b row s er and send s data as and when required, for as long as requi red.
Still JPEG images in a browser.Enterthepathhttp://<ip>/axis-cgi/jpg/image.cgi
Windows Media Player. This requires AXIS Media Control and the H.264 decoder to be installed. The following paths
can be used :
- Unicast via RTP: axrtpu://<ip>/axis-media/media.amp
- Unicast via RTSP: axrtsp://<ip>/axis-media/media.amp
- Unicast via RTSP, tunneled via HTTP: axrtsphttp://<ip>/axis-media/media.amp
-Multicast:axrtpm://<ip>/axis-media/media.amp
QuickTime
TM
. The follo wing paths can be used:
- rtsp://<ip>/axis-media/media.amp
- rtsp://<ip>/axis-media/media.3gp
11
AXIS M7014
Media Streams
Note
<ip>= IP addess
The Axis product supports QuickTime 6 .5.1 and later.
QuickTime adds latency to the v ideo stream.
It may be possible to use other players to view the H.264 stream using the paths above, although A xis does not guarantee
this.
12
AXIS M7014
Setting Up the Product
Setting Up the P roduct
The A xis product can be congured by use rs w ith adm inistrator o r operator rig hts. To open the product’s Setup pages, click Setup in
the top right-hand corner of the Live View page.
Administrators have unrestricted access to all settings.
Operators have access to all settings except System Options
See also the online help
.
Basic Setup
Basic Setup provides shortcuts to the settings thatshouldbemadebeforeusingtheAxisproduct:
1. Users. See
page 30
.
2. TCP/IP. See
page 32
.
3. Date & Time. See
page 31
.
4. Video Stream. See
page 14
.
The Basic Setup menu can be disabled from System Options > Security > Users.
13
AXIS M7014
Video
Video
It is possible to congure the following video features in your A xis product:
Video stream. See
page 14
.
•Streamproles. See
page 15
.
Camera settings. See
page 15
.
Overlay image. See
page 16
.
Video Stream
You can dene the follow ing video stream settings from Video > Video Stream:
•Image.See
page 14
.
H.264. See
page 14
.
•MJPEG.See
page 15
.
Note
Video stream can be congured f or each channel including quad stream .
Image
The default im age settings can be congured under Video> Video Stream. Select the Im age tab.
The following settings are available:
Resolution. Select the default resolution.
Compression. The compression level a ffe cts the image quality, bandwidth and le size of saved images; the lower the
compression, the higher the image quality with higher ban
dwidth requirements and larger le sizes.
Rotate image. If required, the image c
an be rota ted.
Maximum frame rate.Toavoidban
dwidth problems, the frame rate allowed to e ach viewer can be limited .
Overlay settings.See
Ove
rlay, on page 16
.
Click Save to apply t
he new settings.
H.264
H.264, also known as MPEG-4 Part 10/AVC, is a video compression standard that provides high q uality video streams at low bit rates.
An H.264 video stream consists of different types of frames such as I-frames and P-frames. An I-frame is a complete image whe re as
P-fra
mes only c ontain the differences from previous frames.
T
he GOV length is the number of frames between two consecutive I-frames. Increasing the GOV length may save considerably on
bandwidth requirements in some cases, but may also have an adverse affect on image quality.
ThebitratecanbesetasVariable Bit Rate (VBR) or Constant Bit Rate (CBR). VBR adjusts the bit rate according to the image
complexity, using up more bandw idth for incre ased activity in the ima ge , and less for lowe r ima ge activity. CB R allow s you to set a
xed Target bit rate that consumes a predictable amount of band width. As the bit rate would usually need to increase for increased
image activity, but in this case cannot, frame rate and image qualityareaffectednegatively.Topartly compensate for this, it i s
possible to prioritize e ither frame rate or image q uality. Not setting a prior ity m e ans that f rame rate and image quality a re equally
affected. You must save your settin g s before they can take effec t.
14
AXIS M7014
Video
The current bit rate can be set to appear as text overlay. To do this, select the Include text check box option under Overlay
Settings and enter the modier #b in the el d.
MJPEG
Sometimes the image size is large due to low light or complex s cene ry. Adjusting the maximum frame s ize helps to control the
bandwidth and storage used by the Motion JPEG video stream in these situations. Setting the frame size to the Default setting
provides consistently good image quality at the expense of increased band width and storage usage in low light. Limiting the frame
size optimizes bandwidth and storage usage, but may give poor image quality. To prevent increased bandwidth and storage usage,
the ma ximum f rame size should be set to an optimal value.
Quad stream
A Quad vie w displays images from all fo ur channels on a si ngle screen; w here the images f rom each camera take up a quarter of
the display area. It is possible to dene settings for the video stream in quad view.
Stream Proles
Astreamprole is a s et of pre-congured stream settings including resolution, compression, frame rate and overlay settings.
Stream proles can be used:
When setting up recording using action rules, see
Events, on page 25
.
When setting up a continuous recording, see
Continuous Recording, on page 28
.
In the Live View page select the stream prole from the Stream prole dro p-dow n list.
Four pre-programmed stream pro les are available for quick set up. Each pre-programme d prole has a des criptive na m e, indicating
its purpose. If required, the pre-programmed stream proles can be modied and ne w custom i zed stre am proles can be created.
To create a new prole or modify an existing prole , go to Setup > Video > Stream Pro les.
To select a default stream pro le for the Live View page, go to Setup > Live View Cong.
Camera Settings
The Video > Camera Settings page provides access to ad vanced image settings for the Axis product.
Image Appearance
The image Brightness can be adjusted in the range 0–100, where a higher value produces a brighter image.
The Contrast changes the re lati ve difference betwee n light and dark. It can be adjusted using the slidebar.
Video input
Enter a descriptive name for y our video source in the Video source name eld.
The values in the Offset Adjustments elds affect the horizontal and vertical synchronization for the image. This can be used
to eliminate any black border surrounding the image. High values, both negative and positive can put the image out of sync.
De-interlacing - is used to improve vid eo stream image quality from an alog devices. Se lect any of the follow ing options
from the De-interlacing drop-down list. Select None if de-interlacing is no t ne ces sary; Blending for improved image quality
that is not as processor intensive; Adaptive Interpolation performs de-interlacing of the video stream by applying different
lters on the image . This m a y give a better result than Motion Adaptive Inte rpolation in rare cases; Motion Adaptive
Interpolation perfor m s de-interla cing of the video stream by applying different lters depending on the m otion in different
parts of the ima ge. This will in most cases re sult in the best im a ge quality.
15
AXIS M7014
Video
Antialiasing will minimize distortion known as aliasing, which happens when a high-resolution image is represented at
alowerresolution.
For each video input 75 Ohm video termination can be enabled/disabled via the product's web page a t V ideo & Audio >
Video Input > Video termination. These terminations are enabled on fa ctory default. In cases where the product is to be
connected in parallel with other equipment, for optimum vide o quality, it is recom m ende d that ter m ination be en ab led for
only the last device in the video sig nal chain.
Image Settings
Noise reduction - Set to On to enable noise reduction. Noise reduction may increase the amo unt of motion blur.
Privacy Mask
A privacy mask is an ar ea of so lid color that prohibits us e rs from viewing parts of the monitored area. Privacy masks canno t b e
bypassed via the VAPIX® Application Programming Interface (API).
The Privacy Mask List (Video > Privacy Mask) shows all the masks that are currently congured in the Axis product and indicates
if they are enabled.
You can add a new mask, re-size the mask with the mouse, choose a color for the mask, and give the mask a name.
For more i nformation, see the online help
Important
Adding many privacy masks may affect the product’s perform ance.
Note
Privacy mask is not available for the quad stream. However, privacy masks congured o n e ach channel will be displayed
in the qua d.
Overlay
Overlays are used to provide extra information, for examp le for forensic video analysis or during product ins talla tion and
conguration. O verl ays are superimposed over the video stream.
An overlay tex t can display the cur rent date and time, or a text string. When u sing a text string, mod iers can be used to display
information s uch as the cur rent bit rate or the current frame rate. For information about available modiers, see
File Naming &
Date/Time Formats
in the online help .
To enable overlays:
1. Go to Video > Video Stream and select the Ima g e tab.
2. To include an o verlay image, select Include overlay image at the coordinates. The overlay image must rst be uploaded to
the Axis produc
t, see
Overlay Image
.
3. To include
date and time, select Include da te and Include time.
4. To inc
lude a text string, select Include text and enter the text in the eld. Modier s can be used, see
File Naming &
Date/Time Formats
in the o nline he lp .
5. Select the text color, the text background color and the position of the overlay.
6. Click Save.
Tomodifythedateandtimeformat,gotoSystem Options > Date & Time.See
Date & Time, on page 31
.
16
AXIS M7014
Video
Note
Overlay is not poss ible f or quad s tream.
Overlay Image
An overlay image is a static image superimposed over the video stream. The im age, for example company logo, is used to provide
extra information or to mask a part of the image.
To use an overlay image, the imag e must rst be uploaded to the Axis product:
1. Go to Video > Overlay Image.
2. Click Browse andbrowsetothele.
3. Click Upload.
4. Select the image to use from the Use overlay image list.
5. Click Save.
To display the overlay image:
1. Go to Video > Video Stream and select the Image tab.
2. Under Overlay Settings,selectInclude overlay image at the coordinates and enter the X and Y coordinates.
3. Click Save.
For information about supported image formats, see the online help
.
17
AXIS M7014
Live View Cong
Live View Con g
You can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of
theLiveViewpage.
•StreamProle. See
page 15
.
Default Viewer for Browser. See
page 18
.
Viewer Settings. See
page 19
.
Action Buttons. These are the buttons described in
Controls on the Live View Page, on page 8
.
•UserDened Links. See
page 19
.
Default live view video
Select the default video source to be displayed in the Live View page from Setup > Live View Cong This could be one of the 4
video streams or Quad s
tream. See
Quad stre am , on pa g e 15
.
Default Viewer for Browsers
From Live View Cong > Default Viewer se le ct the default method for view ing video images in your brow ser. The p roduct attempts
to show the video im ages in the selected video format an d viewer. If this is not possible, the pro duct overrides the settings and
selects th
e best available c omb ination.
18
AXIS M7014
Live View Cong
Browser Viewer Description
AMC
Recommended viewer in Internet Explorer (H.264/Motion JPEG)
QuickTime
H.264
Java applet
A slow er imaging a lter native to A M C (Motion JPEG). Requires one of the
following installed on the client:
JVM (J2SE) 1.4.2 or higher
JRE (J2SE) 5.0 or higher
Windows Internet Explorer
Still image Displays stil l images only. Click the R efr esh button in your br owser to vie w a
new image
Server Push
Recommended viewer for other browsers (Motion JPEG).
QuickTime
H.264
Java applet
A slower imaging a lternative to Server Push (Motion JPEG only ).
Other browsers
Still image Displays stil l images only. Click the R efr esh button in your br owser to vie w a
new image
For m o re informa tion, ple as e see the online help .
Viewer Settings
To co ngure options for the viewer, go to Live View Cong > Viewer Settings.
•SelectShow viewer toolbar to display the AXIS Media Control (AM C) or the QuickTim e viewer toolba r under the v ideo
image in your browser.
H.264 decoder installation. The administrator can d isable installation of the H.264 decoder included w ith AXIS Media
Control. This is used to prevent installation of unlicensed c opies. Further decoder license s can be purchased from your
Axis res elle r.
•SelectShow crosshair in PTZ joystick mode to ena ble a cross that will indicate the cente r of the image in PTZ joystick mode.
•SelectUse PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ
control panel.
•SelectEnable recording button to enable recording from the Live View page. This button is available when using
the AMC viewer. The recordings are saved to the location specied in the AMC Control Panel. See
AXIS Media Control
(AMC), on page 10
.
User Dened Links
To display user-dened links in the Live View page, select the Show custom link option, give the link a name and then enter the URL
to link to. W hen dening a w eb link do no t remove the 'http://' from the URL address. Custom links can be used to run scripts or
activate external devices connected to the product, or they can link to a web page . Custom links dened as cgi links will run the
script in the b ackground, in a hidden frame. Dening the link as a web link will open the link in a new wind ow.
19
AXIS M7014
PTZ (Pan Tilt Zoom)
PTZ (Pan Tilt Zoom )
Preset Positions
A preset position is a predened view that can be used to quickly steer the camera to a specic location. Preset positions can
be accessed in several w ays:
By selecting the preset from the Preset positions drop-down list in the Live View Page.
When setting up action rules. See
page 25
.
When setting up Guard Tour. See .
To add a preset position:
1. Go to PTZ > Preset Positions.
2. Use the pan, tilt and zoom contro ls to steer the camera view to the desired position.
3. Enter a descriptive nam e in the Current position eld.
4. If required, select Use current position as H ome.
5. Click Add.Thecamerasposition,irisandfocussettingsaresavedasapresetposition.
The Hom e position is readily accessible by clicking the Home button on the Live View page and in the Preset Positions se
tup window.
To set a customized hom e position, select Use current position as Home when adding a preset position. The u
ser-dened home
position will have (H) added, for examp le, Entr ance (H). The defaul t Home position, ca lle d “Ho m e ”, will still be availa ble .
The product can be congured to return to the Home position w hen the PTZ functionality has been inactive for a spe cied length
of time. Enter the length of time in the Return to home when inactive eld and click Save.Setthetimetozerotopreventthe
product fr om automa tically returning to the Home posi
tion.
To include the preset position name in the over
lay text, go to Video,selectInclude overlay text and enter the modier #P in the eld.
For more information about modiers, see
File Naming & Date/Time Formats
in the online help .
Advanced
Limits
Dene the pan, tilt, zo om and focus limits for the Axis product. Movements to the left and right, up and down, can be restricted to
narrow the area under surveillance.
Move speed sets the speed of the ca m era’s pan and tilt movements. The default setting is maximum speed.
When using a jo ystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum
pan/tilt move m ent speed, i.e. the s pee d the ca m er a view moves at when the joystick is pushed all the way out in a ny direction. This is
useful then the view is zoomed in on an object.
See the online help
for more information.
Controls
Panel Shortcut Command Buttons can be congured to provide direct access to commands issued via the VAPIX® Application
Programming Interface. The buttons will be displayed in the PTZ control panel, which is available in the Live View page through
the Ctrl panel button, see
page 9
.
Deselect the op tions under Enable/Disable controls to disable the pan, tilt, zoom, focus and iris controls.
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46

Axis M7014 User manual

Category
Video servers/encoders
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI