2. Article
  3. SKU12684

Article SKU12684, SKU2128 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Article TIMBER Sofa. This document provides a step-by-step guide to assembling the sofa, including attaching the legs and placing the cushions. The document also includes a parts inventory and advises on checking the bolts regularly. I am ready to help you with any questions you might have about assembling the sofa.
  • Where are the legs stored?
    What should I do before fully tightening the bolts?
    What is the correct order to put the cushions?
Assembly Instructions
TIMBER
Sofa
VERSION 1.3
TIME # OF PEOPLE
1
DIFFICULTY
15 min
Page 2 of 4
TIMBER Sofa
PARTS INVENTORY
ID DESCRIPTION QTY
LEGS 4
ALLEN KEY 1
M10 × 60MM BOLT 4
LOCK WASHER 4
WASHER 4
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
Hardware may loosen over time, check
the bolts regularly and tighten if necessary.
Page 3 of 4TIMBER Sofa
1
Align dowels and insert
legs (A) into sofa first.
!
Legs are stored under sofa
in zippered compartment.
× 4
Insert bolt (C) and washers
(D/E) through hole on legs.
Do not fully tighten right away.
!
100%
85%
50%
Page 4 of 4TIMBER Sofa
2
Check leg angles are all
correct before fully tightening.
Fully tightened bolts ensure leg
stability when moving sofa.
Place side cushions on sofa first
before inserting seat cushions.
!
!
100%
85%50%
/