2. Article
  3. SKU15531

Article SKU15531 Assembly Instructions

  • Hello! I've reviewed the Assembly Instructions for the ARTICLE LEVEL 43" Bench. This document provides step-by-step instructions on how to assemble your new bench, including attaching legs with bolts and using an Allen key. I'm ready to answer any questions you might have about the assembly process or features of the bench.
  • What is the first step in assembling the bench?
    How do you attach the back leg?
    What should you do before fully tightening all bolts?
    What to do after all the parts are assembled?
Assembly Instructions
LEVEL
43" Bench
VERSION 1.1
Page 2 of 4
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
LEVEL 43" Bench
15 min
2
PARTS INVENTORY
ID DESCRIPTION QTY
SEAT FRAME 1
BACK LEG 1
LEG 1 1
LEG 2 1
ALLEN KEY 1
BOLT 6
TIME # OF PEOPLE DIFFICULTY
NOTE : Keep allen key for
bolt tightening in the future.
#
#
Page 3 of 4
LEVEL 43" Bench
1
2
Detach 4 metal bolts (F) from metal
and upholestered seat frame (A) by
using the allen key (E). Keep 4 metal
bolts for next assembly steps.
×2
Align the metal frames before fully
tightening all the metal bolts.
!
Do not fully tighten all metal bolts
until they are in place.
!
Attach back leg (B) to seat frame (A) with
two metal bolts by using the allen key.
#
Page 4 of 4
LEVEL 43" Bench
3
×8
Attach leg (B), (C) and (D) to seat frame (A)
with bolts (F). Make sure to align the metal
frames before tightening.
Adjust levelers as needed.
!
/