Bold ARIA X Bluetooth headphone User manual

Brand
Bold
Model
ARIA X Bluetooth headphone
Type
User manual

Bold ARIA X Bluetooth headphones offer a seamless wireless experience for calls and music. Easily pair them with your mobile phone and enjoy hands-free conversations or immerse yourself in your favorite tunes. The intuitive controls let you play/pause music, adjust volume, skip tracks, answer/reject/end calls, and even redial the last number. With a long battery life, you can stay connected all day long. Experience the freedom of wireless audio with Bold ARIA X.

Bold ARIA X Bluetooth headphones offer a seamless wireless experience for calls and music. Easily pair them with your mobile phone and enjoy hands-free conversations or immerse yourself in your favorite tunes. The intuitive controls let you play/pause music, adjust volume, skip tracks, answer/reject/end calls, and even redial the last number. With a long battery life, you can stay connected all day long. Experience the freedom of wireless audio with Bold ARIA X.

ARIA X QUICK GUIDE
POWER ON
- Long press multifunction button until the blue light turns on and the headset beeps.
PAIRING MODE
- Long press multifunction button until red and blue lights flash alternately and the headset beeps.
POWER OFF
- Long press multifunction button until red light is turned off and headset beeps.
Volume (-) Previous
Multifunction Button
Volume (+) Next
USB interface
Microphone
PAIRING STEPS
1. Please keep the headset and mobile phone within 3 feet (1 meter) or as close as possible.
2. Turn on the headset and enter pair mode. Red and blue lights will flash alternately during this step.
3. Start the Bluetooth search function on the mobile phone. Once Bluetooth has finished searching, the
mobile phone will display “BOLD Aria X”.
4. Select “BOLD Aria X” and the headset will automatically pair with the mobile phone. Once connected the
headset will flash a blue light. (If a password is required, enter “0000”),
Note: The pair time of the wireless headset is at least 120 seconds. If the light is turned off, the wireless
pairing mode has stopped. Please repeat step 1 to 4 to pair.
UNPAIRING STEPS
- Turn off Bluetooth from the mobile phone.
- Press and hold the headset multifunction button until the headset automatically turns off.
Note: If you move headset 30 feet (10 meters) away from the mobile phone, the headset will disconnect as
it will be out of range.
RECONNECTING
1. Please keep the headset and mobile phone within 3 feet (1 meter) or as close as possible.
2. Turn on the headset. Once on, the headset will enter search mode and will flash a blue light.
3. Power on Bluetooth on the mobile phone. Once detected the headset will automatically reconnect.
ANSWERING CALLS
- Click the multifunction button to answer the call.
- Answer the phone call from your mobile phone.
REJECTING CALLS
- Long press the multifunction button for 2 seconds.
- Use your mobile phone to reject a call.
HANGING UP CALLS
- Click the multifunction button during a call
- Use your mobile phone to hang up a call.
REDIALING
- Press the multifunction button for two times in the standby mode. This will redial last telephone number.
PLAYING MUSIC
- Click the multifunction button to play or pause music.
- Click the volume button (+) / (-) to select a song.
- When playing music, long press the volume button (+) / (-) to adjust the volume.
Bluetooth Headset FCC warning (FCC ID：YHLBLUARIAX)
Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Bold ARIA X Bluetooth headphone User manual

Brand
Bold
Model
ARIA X Bluetooth headphone
Type
User manual

Bold ARIA X Bluetooth headphones offer a seamless wireless experience for calls and music. Easily pair them with your mobile phone and enjoy hands-free conversations or immerse yourself in your favorite tunes. The intuitive controls let you play/pause music, adjust volume, skip tracks, answer/reject/end calls, and even redial the last number. With a long battery life, you can stay connected all day long. Experience the freedom of wireless audio with Bold ARIA X.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents