ASSEMBLY INSTRUCTIONS FOR
Ashton Tall Floor Lamp
Model # 3439-01
1.03439-01
Remove all parts and lay on a flat surface.
1.Screw pole(B) clockwise into pole(A) to tighten.
2.Screw pole(C) clockwise into pole(B) to tighten.
3.Screw pole(D) clockwise into pole(C) to tighten.
4.
Screw base (E) clockwise onto pole (D) to tighten.
Then get the remaining slack of the power cord
out carefully from point(F) .
5.Set shade(G) on the lamp socket and tighten
clockwise with socket ring(H) to secure shade. Then
screw bulb(D) clockwise into socket(M) to tighten.
6.Set shade(J) on the lamp socket and tighten
clockwise with socket ring(K) to secure shade. Then
screw bulb(L) clockwise into socket(N) to tighten.
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one
blade is wider than the other) as a feature to
reduce the risk of electric shock. This plug will fit
in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Never
use with an extension cord unless plug can be
fully inserted. DO NOT ALTER THE PLUG.
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
BULB TYPE: (1) 2pcs 40 watt type A vintage bulb
included.
Tel: (212) 736 4440 Fax: (212) 736 4806
www.adessohome.com
Assembly Instructions (English) 353 West 39th Street, 2nd Floor, New York, NY 10018
/
