Deagostini MIG 29 Operating instructions

Brand: Deagostini

Model: MIG 29

Type: Operating instructions

PACK 24

PHASE PAGE

116 R-60 air-to-air missile 279

117 R-73 air-to-air missile 282

118 R-27 air-to-air missile 285

119 Supports 288

120 Static dischargers, antennas

and engine nuzzle plugs 291

Published in the UK by De Agostini UK Ltd, Royds Withy King, 65 Carter Lane, London EC4V 5EQ.

Published in the USA by De Agostini Publishing USA, Inc., 299 Park Avenue • New York, New York 10171.

Warning: Not suitable for children under the age of 14. is product is not a toy and is not designed or

intended for use in play.

Items may vary from those shown.

279

Phase 116: R-60 air-to-

air missile

Your parts

1. Р311 — Midsection of the missile.

2. Р313 — Steering ﬁn (2 pcs.).

3. Р314 — Tail section of the missile with tail wings.

4. Р315 — Missile head with canards and steering ﬁns.

5. Р316 — Bracket.

6. Р318 — Tail wing (2 pcs.).

РР screws.

P314

P318P316 P313 PP

P311 P315

280

Assembly

1 For this stage you

will need the parts

supplied with this

stage. Join the

midsection (P311)

and the tail section

(P314) of the missile,

as shown.

2 Install the two tail

wings (P318) onto

the tail section of the

missile (P314), as

shown.

3 Proceed by joining the

midsection (P311) and

the head (P315) of the

missile, as shown.

4 Install the steering

ﬁns (Р313) onto the

missile head (Р315),

as shown. Verify that

the three sections of

the missile are aligned

(Р311, Р314, Р315).

The tail wings, canards

and steering ﬁns

should lie within the

same planes.

P318

P313P315

P314

P315P311

P318

P313

P314 P311

281

D115

P311P316

P311

5 Place the bracket (Р316) onto the midsection of the missile (Р311), as shown. Proceed by securing the bracket with a

PP screw.

6 Secure the completed R-60 missile to the outer under-wing pylon, as shown.

282

Phase 117: R-73 air-to-

air missile

Your parts

1. Р319 — Midsection of the missile.

2. Р320 — Missile head.

3. Р321 — Tail section of the missile.

4. Р323 — Tail wing (2 pcs.).

5. Р325 — Bracket (2 pcs.).

PP screws.

P321

P323 P325 PP

P319 P320

283

Assembly

1 For this stage you will need the parts supplied with this stage. Join the tail section (P321) and the midsection (P319)

of the missile, as shown.

2 Proceed by joining the midsection (P319) and the head (P320) of the missile, as shown.

3 Install the tail wings (Р323) onto the tail section of the missile (Р321), as shown. Verify that the three sections of the

missile are aligned (Р319, Р320, Р321). The tail wings, canards and steering ﬁns should lie within the same planes.

P319P321

P320P319

P323 P321

P323

284

4 Proceed by installing the brackets (Р325) onto the midsection of the missile (Р319), as shown. Secure the brackets

with a PP screws.

5 Secure the completed R-73 missile to the central under-wing pylon, as shown.

P319

P325 P325

D115

P319

285

Phase 118: R-27 air-to-

air missile

Your Parts

1. Р326 — Midsection of the missile.

2. Р327 — Tail section of the missile.

3. Р328 — Missile head.

4. Р330 — Bracket (2 pcs.).

5. Р332 — Steering ﬁn (2 pcs.).

6. Р334 — Tail wing (2 pcs.).

PP screws.

P327

P334 P332 P330 PP

P326 P328

286

Assembly

1 For this stage you

will need the parts

supplied with this

stage. Carefully

join the midsection

(P326) and the tail

section (P327) of the

missile, as shown.

2 Proceed by joining

the head (P328) and

the midsection of

the missile (P326), as

shown.

3 Carefully install the

steering ﬁns (Р332)

onto the missile head

(Р328), as shown.

4 Proceed to install

the tail wings (Р334)

onto the tail section

of the missile (Р327),

as shown.

P327

P328P326

P332

P334 P327

P328

P332

P334

P326

287

P326

P330 P330

P326

D115

5 Install the brackets (Р330) onto the midsection of the missile (Р326), as shown. Secure the brackets with a PP

screws.

6 Secure the completed R-27 missile to the inner under-wing pylon, as shown.

288

Phase 119: Supports

Your Parts

1. D132 — stand base (3 pcs.).

2. Р335 — forward support pole.

3. Р337 — under-wing support pole (2 pcs.).

4. Р338 — pin for opening the landing gear bay ﬂaps.

KP screws.

D132 D132 D132

P335

P338

P337

289

Assembly

1 For this stage you

will need the parts

supplied with this

stage. Insert the

forward support pole

(Р335) into a stand

ba se ( D132).

2 Proceed by securing

the forward support

(Р335) with a KP

screw, as shown.

3 Carefully insert the

under-wing support

poles (Р337) into

stand bases (D132),

as shown.

4 Secure the support

poles (Р337) with KP

screws, as shown.

D132 D132

D132

D132P337 P337 D132

P335 D132

290

5 Install the forward stand onto the model plane, as shown.

6 Proceed by installing the under-wing stands, as shown.

P335

291

Phase 120: Static

dischargers, antennas

and engine nuzzle

plugs

Your Parts

1. Р342 — Static discharger (4 pcs.).

2. Р346 — Static discharger (4 pcs.).

3. Р347 —IFF transponder antenna fairing.

4. Р348 — Short-range navigation antenna.

5. Р349 — Engine nuzzle plug (2 pcs.).

6. Х032 — Tape.

P342

P346

P349

P347 P348 X032 X033

292

Assembly

1 For this stage you will need the parts supplied with this stage and the assembled aircraft model. Install the static

dischargers (Р342) onto the undersides of the port and starboard wing panels and onto the undersides of the port

and starboard stabilisers, as shown.

2 In order to install a static discharger (P346) onto the port wingtip, you will need tape (Х032). Carefully remove the

protective ﬁlm from the tape, then take one strip of tape and wrap it around the pin of part P346 for the adhesive

layer to remain on it, as shown. Proceed by removing the strip of tape and inserting the part into the port wingtip, as

shown.

D126

P342

X032

P346

P244

P346

D111

P342

P342 D128

D096 P342

293

D085

P347

P348

D087

D128D126

P347

P346 P346

P349 P349

X033

P270 P346

3 Proceed by installing a static discharger

(P346) onto the starboard wingtip, after

applying an adhesive layer onto the

discharger’s pin, as described in step 2.

4 Install the static dischargers (Р346) onto the port and

starboard stabiliser tips, as shown. First, apply an adhesive

layer onto the discharger pins, using tape (Х032).

5 Insert the IFF

transponder

antenna fairing

(Р347) into the

port tail ﬁn tip,

after applying

an adhesive

layer using tape

(X033) onto the

part’s pin.

6 Insert the short-range navigation antenna

(Р348) into the starboard tail ﬁn tip, after

applying an adhesive layer using tape (X033)

onto the part’s pin.

7 Proceed by installing the plugs (Р349) onto the engine

nuzzles, as shown.

Deagostini MIG 29 Operating instructions

Deagostini MIG 29 Operating instructions

Deagostini MIG 29 Operating instructions

Related papers

Other documents