PACK 23
STAGE PAGE
111 Starboard movable stabiliser 266
112 Starboard movable stabiliser 268
113 R-60 air-to-air missile 270
114 R-73 air-to-air missile 273
115 R-27 air-to-air missile 276
Published in the UK by De Agostini UK Ltd, Royds Withy King, 65 Carter Lane, London EC4V 5EQ.
Published in the USA by De Agostini Publishing USA, Inc., 299 Park Avenue • New York, New York 10171.
All rights reserved © 2019
Warning: Not suitable for children under the age of 14.
is product is not a toy and is not designed or intended for use in play.
Items may vary from those shown.
266
Stage 111: Starboard
movable stabiliser
Your Par ts
1. D128 — Top of the stabiliser
2. Р285 — Bushing
BM screws
BM
D128
P285
267
For this stage you will need
the parts supplied with this
stage. Carefully install the
bushing (P283) on the axis of
the stabiliser, as shown, and
secure it with a BM screw.
Assembly
D128
P285
268
Stage 112: Starboard
movable stabiliser
Your Par ts
1. D129 — Bottom of the stabiliser
2. Р286 — Anchor plate
LМ and SM screws
LM SM
D129
P286
269
Assembly
1 For this stage you
will need to parts
supplied for this
stage and Stage
111. Attach the top
of the stabiliser
(D128) to the
bottom of the
stabiliser (D129), as
shown, and secure
them with the SM
screws.
2 Install the axis of the stabiliser onto the fuselage pocket, then install the anchor plate (P286), as shown, and secure it
with the LM screws. Verify the mobility of the stabiliser.
D129
D128
D128
P286
270
Stage 113: R-60 air-to-
air missile
Your Par ts
1. Р287 — Midsection of the missile
2. Р289 — Steering fin (2 pcs.)
3. Р290 — Tail section of the missile with tail wings
4. Р291 — Missile head with canards and steering fins
5. Р292 — Bracket
6. Р294 — Tail wing (2 pcs.)
РР screws
PP
P287 P289
P290
P291
P292
P294
271
Assembly
1 For this stage you the
parts supplied with
this stage. Carefully
join the midsection
(P287) and the tail
section of the missile
(P290), as shown.
2 Install the two tail
wings (P294) onto
the tail section of the
missile (P290), as
shown.
3 Join the midsection
(P287) and the head
(P291) of the missile,
as shown.
4 Install the steering
fins (Р289) onto the
missile head (Р291),
as shown. Verify that
the three sections
of the missile are
aligned (Р287, Р290,
Р291). The tail wings,
canards and steering
fins should lie within
the same plane.
P290
P294P294 P290
P287 P291
P289P291
P289
P287
272
1 Place the brackets (Р292) onto the midsection of the missile (Р287), as shown. Proceed by securing the brackets
with a PP screw.
2 Secure the completed R-60 missile to the outer under-wing pylon, as shown.
P287
P292
P287
D100
273
Stage 114: R-73 air-to-air
missile
Your Par ts
1. Р295 — Midsection of the missile
2. Р296 — Missile head
3. Р297 — Tail section of the missile
4. Р299 — Tail wing (2 pcs.)
5. Р301 — Bracket (2 pcs.)
РР screws
PP
P297
P295
P296
P299
P301
274
Assembly
1 For this stage you will need the parts supplied with this stage. Join the tail section (P297) and the midsection (P295)
of the missile, as shown.
2 Proceed by joining the midsection (P295) and head (P296) of the missile, as shown.
3 Install the tail wings (Р299) onto the tail section of the missile (Р297), as shown. Verify that the three sections of the
missile are aligned (Р295, Р296, Р297). The tail wings, canards and steering fins should lie within the same plane.
P295P297
P296P295
P299 P297
P299
275
4 Install the brackets (Р301) onto the midsection of the body (Р295), as shown. Secure the brackets with a PP screw.
5 Secure the completed R-73 missile to the central under-wing pylon, as shown.
P295
D100
P295
P301 P301
276
Stage 115: R-27 air-to-air
missile
Your Par ts
1. Р302 — Midsection of the missile
2. Р303 — Tail section of the missile
3. Р304 — Missile head
4. Р308 — Steering fin (2 pcs.)
5. Р310 — Tail wing (2 pcs.)
6. Р306 — Bracket (2 pcs.)
РР screws
P303
P310 P308 PP
P302 P304 P306
277
Assembly
1 For this stage you
will need the parts
supplied with this
stage. Carefully
join the midsection
(P302) and the tail
section (P303) of the
missile, as shown.
2 Proceed by joining
the head (P304) and
the midsection of
the missile (P302), as
shown.
3 Carefully install the
steering fins (Р308)
onto the missile head
(Р304), as shown.
4 Proceed to install
the tail wings (Р310)
onto the tail section
of the missile (Р303),
as shown.
P304P302
P303
P302
P304P308
P310
P303
P308
P310
278
1 Install the brackets (Р306) onto the midsection of the body (Р302), as shown. Secure the brackets with a PP screw.
2 Secure the completed R-27 missile to the inner under-wing pylon, as shown.
P302
D100
P306 P306P302
/
