Halcyon EX380 1PSSWL Underwater LED Spot User manual

OUTLINE DIMENSION

COMPONENT DESCRIPTION

Front cover

Bracket Housing

Glass

Cable gland

- Colour Temperature: 2700k

- Input Voltage: 24V DC Constant Voltage (wire in parallel)

- Ingress Protection Rating: IP68

- Max installation depth 1m

- 316 STS construction

- This luminaire has been designed to run underwater and

utilises water to displace heat generated while operating.

NOT SUITABLE FOR USE OUTSIDE OF WATER

- To prevent voltage drop over a circuit total luminaire wattage plus voltage drop

over the length of a cable run and cable gauge must be taken into account.

- Always try to use a Constant Voltage Driver double the luminaire circuit wattage.

- Multistrand UV protected flex should be utilised for all exterior 24V DC CV circuits.

- All cable joints must be a resin or IP68 type - NOTE: standard crimps, terminal

blocks and PVC tape are not suitable cable joining methods.

- Applicable environment temperature: -20°C .... +40°C

- All installation work must be carried out by a registered electrician.

EX380 1PSSWL

Underwater LED Spot

Item No.

WIRING DIAGRAM

SPECIFICATIONS

Glass: Step tempered glass,T=7mm

H07RN-F 2x1.0mm L=3m

IP-68 M16a copper with nickel-coated

PCB: Excellent heat conductivity aluminum,coefficient

of heat conductivity≥2.0w/mk

Cool white=143

Warm white=115