Brodit 654737 Datasheet

Category
Holders
Type
Datasheet
26 January, 2015, www.brodit.com, © 2015 Brodit AB
Product 654737
654737 ProClip
Angled mount, NOT for Entry
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320286547376
Item no 654737 fits:
Seat Mii 12-15 (England)
Skoda Citigo 12-15 (England)
Volkswagen UP 12-15 (For all countries)
1(2)
1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Press the thin end of the enclosed gap opener into the gap between the center console and the dashboard, to
widen the gap.
2. Hook the angled edge on the upper part of the ProClip into the gap between the upper and the lower section of
the dashboard.
3. Press the ProClip forward and hook the angled edge into the gap next to the gap opener. Press upward on the
lower part of the ProClip so the angled edge goes all the way into the gap. Pull out the gap opener.
4. The ProClip is in place.
2(2)
  • Page 1 1
  • Page 2 2

Brodit 654737 Datasheet

Category
Holders
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI