Brodit 655035 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Brodit 655035 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
27 January, 2015, www.brodit.com, © 2015 Brodit AB
Product 655035
655035 ProClip
Angled mount, NOT for models with Automatic Climate Control (ACC).
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320286550352
Item no 655035 fits:
Citroen C1 14-15 (For all countries)
Peugeot 108 14-15 (For all countries)
Toyota AYGO 14-15 (For all countries)
1(2)
1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read the instructions and look at the pictures before installing the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel of the adhesive tape
cover on the ProClip. Place the angled right edge of the ProClip by the edge of the frame surrounding the center
console control panel.
2. Push inward/leftward on the ProClip so the angled edge goes all the way into the gap.
3. Press forward on the left part of the ProClip so the angled edge hooks into the gap on the side of the center
console.
4. The ProClip is in place.
2(2)
/