2. MK Diamond Products
  3. MK-101 Stand

MK Diamond Products MK-101 Stand Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the MK Diamond Products MK-101 Stand Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MK-101 Stand Instruction Sheet
The MK-101 weighs eighty-seven (87.5)
pounds. To lift the saw using two people,
each person will grasp the front and back of
the frame. To lift the saw using one person,
remove the Cutting Head first, and then grasp
the front and back of the frame.
CAUTION
Cutting
Head
Lift
Point
(A)
Open the stand and place on
at surface
(B)
Remove Water Basin,
place saw on stand
(C)
Ensure saw frame is
positioned properly
(D)
Reinstall the Water Basin
© 2010 MK Diamond Products, Inc. All Rights Reserved. Images and specifications are subject to change without notice. MK-101 Instruction Stand Sheet Part# 168244-IS (03/10)
1315 Storm Parkway, Torrance, CA 90501 |
P 800.421.5830 | www.mkdiamond.com | F 310.539.5158
This stand is for use on the new saw frame
(part# 168021) only. Please check that you
have the correct frame (see below) before
attempting to use this stand.
NOTE:
Part# 168021
Part# 153003
Lift
Point
Stand Part# 168244
/