Krystol Plug Krystol Plug 5 gal Installation guide
- Type
- Installation guide
Krystol Plug Krystol Plug 5 gal: Fast-acting solution for stopping water leaks in concrete structures. Ideal for sealing cracks, holes, and joints. Sets in 1-2 minutes, even underwater. Creates a strong, non-shrinking seal that withstands extreme pressure. Easy to mix and apply. Safe for drinking water applications.
Krystol Plug Krystol Plug 5 gal: Fast-acting solution for stopping water leaks in concrete structures. Ideal for sealing cracks, holes, and joints. Sets in 1-2 minutes, even underwater. Creates a strong, non-shrinking seal that withstands extreme pressure. Easy to mix and apply. Safe for drinking water applications.
Kryton, Krystol and KIM are trademarks of Kryton International Inc. ©2011 V. 2 011-0 8
Kryton International Inc.
3
1645 East Kent Avenue, Vancouver BC, Canada V5P 2S8 | tel 1.604.324.8280 | fax 1.604.324.8899 | toll free 1.800.267.8280 | web kryton.com
TECHNICAL DATA SHEET
Krystol Plug™
(Rapid-Setting Hydraulic Cement for Concrete Repair)
Product Code: K-620
DESCRIPTION
Krystol Plug is a fast setting powder that, when mixed to a stiff-dough consistency with water, may be used to immediately
arrest the seepage or ow of water through concrete voids. Krystol Plug is used to stop owing water, allowing waterproong
repair to be installed in leaking cracks, holes, joints or any place where water is penetrating a concrete structure.
FEATURES
• Stops owing water immediately
• Sets fast, in one to two minutes
• Easy to mix and apply
• Will set up and harden under water
• Has exceptional strength
• Does not contain any chlorides
• Safe for drinking water applications
KEY BENEFITS
• Can stop extreme leaks
• Works where all other products fail
RECOMMENDED USES
• Use as part of the Krystol
®
Crack Repair System to repair leaking cracks, joints and holes
• Provides impervious, non-shrinking seal to prevent seepage around pipes and metal xtures in masonry and concrete
PHYSICAL PROPERTIES
Appearance Dark gray powder
Bulk density g/cm
3
(lb. /cu. ft.) 1.4 (88)
pH (when mixed with water) 12
PLASTIC PROPERTIES
Working time (20°C/ 68°F, 50% RH) 1 minute
Hardening time (20°C/ 68°F, 50% RH) 2 minutes
Concrete Waterproong Details 1of 2
Kryton, Krystol and KIM are trademarks of Kryton International Inc. ©2011
1645 East Kent Avenue, Vancouver BC, Canada V5P 2S8 | tel 1.604.324.8280 | fax 1.604.324.8899 | toll free 1.800.267.8280 | web kryton.com
Kryton, Krystol and KIM are trademarks of Kryton International Inc. ©2011 V. 2 011- 0 8
Kryton International Inc.Kryton International Inc.
4
1645 East Kent Avenue, Vancouver BC, Canada V5P 2S8 | tel 1.604.324.8280 | fax 1.604.324.8899 | toll free 1.800.267.8280 | web kryton.com
HARDENED PROPERTIES
Compressive strength 50 MPa (7250 psi) @ 7 days
APPLICATION
For use as part of the Krystol Crack Repair System, read and distribute Application Instruction 5.11 —
Waterproong Cracks, Holes and Joints before using this product. Mix Krystol Plug to a suitable putty consistency
that can be held in your hand (wear gloves) -approximately 4 parts powder to 1 part clean water by volume. Mix only the
amount of material that can be applied within one minute. After the Krystol Plug putty has been adequately kneaded into
a uniform texture, immediately press it rmly into the cracks and crevices to be sealed using maximum pressure but with
minimum back and forth motion or rubbing. Air and surface temperatures must be at least 4 °C (40 °F).
LIMITATIONS
Krystol Plug is effective for rigid structures only and may not reliably seal cracks that experience variable loading or repeated
movement. Consult a Kryton representative for project specic recommendations.
SAFETY
Read the Material Safety Data Sheet (MSDS) for this product. For professional use only. This product becomes caustic when
mixed with water or perspiration. Avoid contact with skin or eyes. Avoid breathing dust. Wear long sleeves, safety goggles and
impervious gloves.
PACKAGING
• 5 kg (11 lb.) resealable pails
• 25 kg (55 lb.) resealable pails
SHELF LIFE
Krystol Plug has a minimum shelf life of 24 months for unopened pails, and 4 months for properly resealed pails.
WARRANTY
Kryton International Inc. warrants that its products are free from manufacturer’s defects and, when applied in accordance
with the current specication and application instructions will perform as so stated in its product literature. Because methods
and conditions of use are beyond the control of Kryton, no guarantee, expressed or implied can be given as to the results
of application. Liability of Kryton shall be limited to replacement of materials proved defective or, at its option, refund of the
purchase price of the product.
2 of 2
TECHNICAL DATA SHEET
Concrete Waterproong Details
-
1
-
2
Krystol Plug Krystol Plug 5 gal Installation guide
- Type
- Installation guide
Krystol Plug Krystol Plug 5 gal: Fast-acting solution for stopping water leaks in concrete structures. Ideal for sealing cracks, holes, and joints. Sets in 1-2 minutes, even underwater. Creates a strong, non-shrinking seal that withstands extreme pressure. Easy to mix and apply. Safe for drinking water applications.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Krystol Bari-Cote Krystol Bari Cote 5 Gal Pail Installation guide
-
Krystol T1 Krystol T1 K-210 User manual
-
Krystol T1 Krystol T1 K-210 Installation guide
-
BABYTREND ogur001 Owner's manual
-
Kryton Hydropel Hydropel Masonry Sealer User manual
-
Equinox Systems Krypton EQLED21 User manual
-
GCP Applied Technologies 5003004 Operating instructions
-
-
Master VA0455 Operating instructions
-
Master Products VV1236 Operating instructions
